wireguard-linux/drivers/media/i2c/Makefile, branch jd/unified-crypt-queue

media: i2c: Add driver for Sony IMX219 sensor

2020-02-27T20:19:12Z

Adds a driver for the 8MPix Sony IMX219 CSI2 sensor. Whilst the sensor supports 2 or 4 CSI2 data lanes, this driver currently only supports 2 lanes. 8MPix @ 15fps, 1080P @ 30fps (cropped FOV), and 1640x1232 (2x2 binned) @ 30fps are currently supported. [Sakari Ailus: make imx219_check_hwcfg static] Signed-off-by: Dave Stevenson Signed-off-by: Andrey Konovalov Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

media: hi556: Add support for Hi-556 sensor

2019-11-05T12:12:49Z

Add a V4L2 sub-device driver for Hynix Hi-556 image sensor. This is a camera sensor using the I2C bus for control and the CSI-2 bus for data. This driver supports following features: - manual exposure and analog/digital gain control support - vblank/hblank control support - test pattern support - media controller support - runtime PM support - support following resolutions: + 2592x1944 at 30FPS + 1296x972 at 30FPS [sakari.ailus@linux.intel.com: Remove MEDIA_CAMERA_SUPPORT from Kconfig dependencies] Signed-off-by: Shawn Tu Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

media: i2c: Add IMX290 CMOS image sensor driver

2019-10-24T21:48:03Z

Add driver for Sony IMX290 CMOS image sensor driver. The driver only supports I2C interface for programming and MIPI CSI-2 for sensor output. [Sakari Ailus: Rewrapped a few lines over 80 chars a little.] Signed-off-by: Manivannan Sadhasivam Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

media: ov5675: Add support for OV5675 sensor

2019-08-15T11:05:15Z

Add a V4L2 sub-device driver for Omnivision ov5675 image sensor. This is a camera sensor using the I2C bus for control and the CSI-2 bus for data. This driver supports following features: - manual exposure and analog/digital gain control support - vblank/hblank control support - test pattern support - media controller support - runtime PM support - support following resolutions: + 2592x1944 at 30FPS + 1296x972 at 30FPS [Sakari Ailus: Wrapped a few long lines.] [mchehab+samsung@kernel.org: fix a checkpatch warning] Signed-off-by: Shawn Tu Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

media: i2c: fix warning same module names

2019-06-21T20:38:08Z

When building with CONFIG_VIDEO_ADV7511 and CONFIG_DRM_I2C_ADV7511 enabled as loadable modules, we see the following warning: drivers/gpu/drm/bridge/adv7511/adv7511.ko drivers/media/i2c/adv7511.ko Rework so that the file is named adv7511-v4l2.c. Signed-off-by: Anders Roxell Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: st-mipid02: MIPID02 CSI-2 to PARALLEL bridge driver

2019-04-22T15:39:20Z

This V4L2 subdev driver enables STMicroelectronics MIPID02 device. Signed-off-by: Mickael Guene Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

media: soc_camera: Move to the staging tree

2019-02-18T17:09:19Z

The SoC camera framework has no functional drivers left, something that has not changed for years. Move the leftovers to the staging tree. Signed-off-by: Sakari Ailus Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: i2c: mt9m001: copy mt9m001 soc_camera sensor driver

2019-01-25T12:46:52Z

Copy the soc_camera based driver in v4l2 sensor driver directory. This commit just copies the original file without modifying it. Cc: Guennadi Liakhovetski Signed-off-by: Akinobu Mita Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

media: ov8856: Add support for OV8856 sensor

2019-01-25T12:35:49Z

This patch adds driver for Omnivision's ov8856 sensor, the driver supports following features: - manual exposure/gain(analog and digital) control support - two link frequencies - VBLANK/HBLANK support - test pattern support - media controller support - runtime PM support - enable Vsync signal output - supported resolutions + 3280x2464 at 30FPS + 1640x1232 at 30FPS Signed-off-by: Ben Kao Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

media: soc_camera: ov9640: move ov9640 out of soc_camera

2019-01-16T18:05:34Z

Initial part of ov9640 transition from soc_camera subsystem to a standalone v4l2 subdevice. The soc_camera version seems to be used only in Palm Zire72 and in (the future) HTC Magician. On these two devices the support is broken as pxa_camera driver doesn't use soc_camera anymore. The other mentions from git grep are "TODOs" (in board-osk.c) or chip names for unsupported sensors on HW which doesn't use soc_camera at all (irelevant). Copy the driver files from soc_camera and mark the original ones in the Kconfig description as obsoleted. Add config option VIDEO_OV9640 to the build files in drivers/media/i2c. Signed-off-by: Petr Cvek Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab