wireguard-linux/drivers/media/usb/dvb-usb, branch jd/orphan-parallel

Merge tag 'v5.9-rc4' into patchwork

2020-09-07T14:13:06Z

Linux 5.9-rc4 * tag 'v5.9-rc4': (1001 commits) Linux 5.9-rc4 io_uring: fix linked deferred ->files cancellation io_uring: fix cancel of deferred reqs with ->files include/linux/log2.h: add missing () around n in roundup_pow_of_two() mm/khugepaged.c: fix khugepaged's request size in collapse_file mm/hugetlb: fix a race between hugetlb sysctl handlers mm/hugetlb: try preferred node first when alloc gigantic page from cma mm/migrate: preserve soft dirty in remove_migration_pte() mm/migrate: remove unnecessary is_zone_device_page() check mm/rmap: fixup copying of soft dirty and uffd ptes mm/migrate: fixup setting UFFD_WP flag mm: madvise: fix vma user-after-free checkpatch: fix the usage of capture group ( ... ) fork: adjust sysctl_max_threads definition to match prototype ipc: adjust proc_ipc_sem_dointvec definition to match prototype mm: track page table modifications in __apply_to_page_range() MAINTAINERS: IA64: mark Status as Odd Fixes only MAINTAINERS: add LLVM maintainers MAINTAINERS: update Cavium/Marvell entries mm: slub: fix conversion of freelist_corrupted() ...

media: rc: harmonize infrared durations to microseconds

2020-09-03T14:18:55Z

rc-core kapi uses nanoseconds for infrared durations for receiving, and microseconds for sending. The uapi already uses microseconds for both, so this patch does not change the uapi. Infrared durations do not need nanosecond resolution. IR protocols do not have durations shorter than about 100 microseconds. Some IR hardware offers 250 microseconds resolution, which is sufficient for most protocols. Better hardware has 50 microsecond resolution and is enough for every protocol I am aware off. Unify on microseconds everywhere. This simplifies the code since less conversion between microseconds and nanoseconds needs to be done. This affects: - rx_resolution member of struct rc_dev - timeout member of struct rc_dev - duration member in struct ir_raw_event Cc: "Bruno Prémont" Cc: Hans Verkuil Cc: Maxim Levitsky Cc: Patrick Lerda Cc: Kevin Hilman Cc: Neil Armstrong Cc: Jerome Brunet Cc: Martin Blumenstingl Cc: Sean Wang Cc: Matthias Brugger Cc: Patrice Chotard Cc: Maxime Ripard Cc: Chen-Yu Tsai Cc: "David Härdeman" Cc: Benjamin Valentin Cc: Antti Palosaari Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab

media: dvb_usb_pctv452e: use ISL6423 voltage regulator per default

2020-09-03T14:14:59Z

Both TT-connect S2-3600 and Pinnacle PCTV Sat HDTV are using Intersil ISL6423 as LNB voltage regulator. This makes TT-connect S2-3650 CI the only device which uses STM LNBP22 regulator which is currently used for all devices driven by pctv452e driver. This patch fixes this by creating an exception for TT-connect S2-3650 CI to continue to use STM LNBP22 while all others now using correct ISL6423 driver which makes DiSEqC/EN50494 comands which involve voltage changes now working on the other devices (which didn't work before). Signed-off-by: Alex Bee Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab

media: usb: dib0700_devices.c: remove useless if/else

2020-08-29T06:01:59Z

Fix the following coccinelle report: drivers/media/usb/dvb-usb/dib0700_devices.c:1741:1-3: WARNING: possible condition with no effect (if == else) Both branches are the same, so remove the if/else altogether. Found using - Coccinelle (http://coccinelle.lip6.fr) [hverkuil: fix checkpatch warnings] Signed-off-by: Daniel W. S. Almeida Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: media/usb: use vb2_video_unregister_device()

2020-08-28T13:02:52Z

Use vb2_video_unregister_device() to automatically stop streaming at unregister time. This avoids the use of vb2_queue_release() which should not be called by drivers that set vdev->queue. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: dib0700: Fix identation issue in dib8096_set_param_override()

2020-08-27T20:36:28Z

Fix identation issues. Fixes: 5e9c85d98337 ("[media] dib8096: enhancement") Reported-by: Linus Torvalds Signed-off-by: Gustavo A. R. Silva

treewide: Use fallthrough pseudo-keyword

2020-08-23T22:36:59Z

Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva

media: cxusb-analog: fix V4L2 dependency

2020-06-23T13:08:58Z

CONFIG_DVB_USB_CXUSB_ANALOG is a 'bool' symbol with a dependency on the tristate CONFIG_VIDEO_V4L2, which means it can be enabled as =y even when its dependency is =m. This leads to a link failure: drivers/media/usb/dvb-usb/cxusb-analog.o: In function `cxusb_medion_analog_init': cxusb-analog.c:(.text+0x92): undefined reference to `v4l2_subdev_call_wrappers' drivers/media/usb/dvb-usb/cxusb-analog.o: In function `cxusb_medion_register_analog': cxusb-analog.c:(.text+0x466): undefined reference to `v4l2_device_register' cxusb-analog.c:(.text+0x4c3): undefined reference to `v4l2_i2c_new_subdev' cxusb-analog.c:(.text+0x4fb): undefined reference to `v4l2_subdev_call_wrappers' ... Change the dependency only disallow the analog portion of the driver in that configuration. Fixes: e478d4054054 ("media: cxusb: add analog mode support for Medion MD95700") Signed-off-by: Arnd Bergmann Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab

media: dvb-usb: Add Cinergy S2 PCIe Dual Port support

2020-05-25T07:09:39Z

Terratec Cinergy S2 PCIe Dual is a PCIe device with two tuners that actually contains two USB devices. The devices are visible in the lsusb printout. Bus 004 Device 002: ID 153b:1182 TerraTec Electronic GmbH Cinergy S2 PCIe Dual Port 2 Bus 003 Device 002: ID 153b:1181 TerraTec Electronic GmbH Cinergy S2 PCIe Dual Port 1 The devices use the Montage M88DS3000/M88TS2022 demod/tuner. Signed-off-by: Dirk Nehring Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab

media: dvb-usb: make dvb_usb_device_properties const

2020-04-21T10:56:10Z

This makes it possible to declare dvb_usb_device_properties const. Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab