wireguard-linux/drivers/misc/Kconfig, branch jd/orphan-parallel

misc: Kconfig: fix a HISI_HIKEY_USB dependency

2020-10-08T07:21:33Z

The dependency should be just USB_ROLE_SWITCH, instead of CONFIG_USB_ROLE_SWITCH. Fixes: 2827d98bc5d6 ("misc: Kconfig: add a new dependency for HISI_HIKEY_USB") Reported-by: Nathan Chancellor Reviewed-by: Nathan Chancellor Signed-off-by: Mauro Carvalho Chehab Link: https://lore.kernel.org/r/0b6dff854c4bb412c2c11f17803e84d61385415f.1602138248.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman

misc: Kconfig: add a new dependency for HISI_HIKEY_USB

2020-10-07T07:23:20Z

As warned by Randy: on x86_64: CONFIG_USB_ROLE_SWITCH=m and HISI_HIKEY_USB=y. ld: drivers/misc/hisi_hikey_usb.o: in function `hisi_hikey_usb_remove': hisi_hikey_usb.c:(.text+0x61): undefined reference to `usb_role_switch_unregister' ld: hisi_hikey_usb.c:(.text+0xa4): undefined reference to `usb_role_switch_put' ld: drivers/misc/hisi_hikey_usb.o: in function `hub_usb_role_switch_set': hisi_hikey_usb.c:(.text+0xd3): undefined reference to `usb_role_switch_get_drvdata' ld: drivers/misc/hisi_hikey_usb.o: in function `relay_set_role_switch': hisi_hikey_usb.c:(.text+0x54d): undefined reference to `usb_role_switch_set_role' ld: drivers/misc/hisi_hikey_usb.o: in function `hisi_hikey_usb_probe': hisi_hikey_usb.c:(.text+0x8a5): undefined reference to `usb_role_switch_get' ld: hisi_hikey_usb.c:(.text+0xa08): undefined reference to `usb_role_switch_register' ld: hisi_hikey_usb.c:(.text+0xa6e): undefined reference to `usb_role_switch_put' Make it dependent on CONFIG_USB_ROLE_SWITCH. Reported-by: Randy Dunlap Acked-by: Randy Dunlap # build-tested Signed-off-by: Mauro Carvalho Chehab Link: https://lore.kernel.org/r/0e49432d0db9ee8429a9923a1d995935b6b83552.1602047370.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman

misc: hisi_hikey_usb: add support for Hikey 970

2020-09-10T16:56:41Z

The HiKey 970 board is similar to Hikey 960 with regards to its USB configutation: it also relies on a USB HUB that is used when DWC3 is at host mode. However, it requires a few extra DT settings, as it uses a voltage regulator and GPIO reset pin. Add support for them. Signed-off-by: Mauro Carvalho Chehab Link: https://lore.kernel.org/r/62843df9927b4d8dac5dc7c4a189567fa52ab2bb.1599717402.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman

misc: hisi_hikey_usb: Driver to support onboard USB gpio hub on Hikey960

2020-09-10T16:56:38Z

The HiKey960 has a fairly complex USB configuration due to it needing to support a USB-C port for host/device mode and multiple USB-A ports in host mode, all using a single USB controller. See schematics here: https://github.com/96boards/documentation/raw/master/consumer/hikey/hikey960/hardware-docs/HiKey960_Schematics.pdf This driver acts as a usb-role-switch intermediary, intercepting the role switch notifications from the tcpm code, and passing them on to the dwc3 core. In doing so, it also controls the onboard hub and power gpios in order to properly route the data lines between the USB-C port and the onboard hub to the USB-A ports. Signed-off-by: Yu Chen [jstultz: Major rework to make the driver a usb-role-switch intermediary] Signed-off-by: John Stultz Signed-off-by: Mauro Carvalho Chehab Link: https://lore.kernel.org/r/c263f72e1d803c18c45a69ce2c333e79a7ed89ff.1599717402.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman

Merge tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2020-08-05T18:43:47Z

Pull char/misc driver updates from Greg KH: "Here is the large set of char and misc and other driver subsystem patches for 5.9-rc1. Lots of new driver submissions in here, and cleanups and features for existing drivers. Highlights are: - habanalabs driver updates - coresight driver updates - nvmem driver updates - huge number of "W=1" build warning cleanups from Lee Jones - dyndbg updates - virtbox driver fixes and updates - soundwire driver updates - mei driver updates - phy driver updates - fpga driver updates - lots of smaller individual misc/char driver cleanups and fixes Full details are in the shortlog. All of these have been in linux-next with no reported issues" * tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (322 commits) habanalabs: remove unused but set variable 'ctx_asid' nvmem: qcom-spmi-sdam: Enable multiple devices dt-bindings: nvmem: SID: add binding for A100's SID controller nvmem: update Kconfig description nvmem: qfprom: Add fuse blowing support dt-bindings: nvmem: Add properties needed for blowing fuses dt-bindings: nvmem: qfprom: Convert to yaml nvmem: qfprom: use NVMEM_DEVID_AUTO for multiple instances nvmem: core: add support to auto devid nvmem: core: Add nvmem_cell_read_u8() nvmem: core: Grammar fixes for help text nvmem: sc27xx: add sc2730 efuse support nvmem: Enforce nvmem stride in the sysfs interface MAINTAINERS: Add git tree for NVMEM FRAMEWORK nvmem: sprd: Fix return value of sprd_efuse_probe() drivers: android: Fix the SPDX comment style drivers: android: Fix a variable declaration coding style issue drivers: android: Remove braces for a single statement if-else block drivers: android: Remove the use of else after return drivers: android: Fix a variable declaration coding style issue ...

misc: Replace HTTP links with HTTPS ones

2020-07-23T07:44:15Z

Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov Link: https://lore.kernel.org/r/20200713164024.35988-1-grandmaster@al2klimov.de Signed-off-by: Greg Kroah-Hartman

docs: misc-devices/pci-endpoint-test.txt: convert to ReST

2020-06-19T20:05:49Z

- use title markups; - mark literal blocks. Signed-off-by: Mauro Carvalho Chehab Link: https://lore.kernel.org/r/1b1f4e5e57fd2065828cecc9d07afbd247349e94.1592203650.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet

treewide: replace '---help---' in Kconfig files with 'help'

2020-06-13T16:57:21Z

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada

bus: vexpress-config: Merge vexpress-syscfg into vexpress-config

2020-05-13T17:42:46Z

The only thing that vexpress-syscfg does is provide a regmap to vexpress-config bus child devices. There's little reason to have 2 components for this. The current structure with initcall ordering requirements makes turning these components into modules more difficult. So let's start to simplify things and merge vexpress-syscfg into vexpress-config. There's no functional change in this commit and it's still separate components until subsequent commits. Cc: Lorenzo Pieralisi Cc: Linus Walleij Cc: Arnd Bergmann Reviewed-by: Sudeep Holla Acked-by: Greg Kroah-Hartman Acked-by: Liviu Dudau Signed-off-by: Rob Herring

uacce: add uacce driver

2020-02-22T01:25:42Z

Uacce (Unified/User-space-access-intended Accelerator Framework) targets to provide Shared Virtual Addressing (SVA) between accelerators and processes. So accelerator can access any data structure of the main cpu. This differs from the data sharing between cpu and io device, which share only data content rather than address. Since unified address, hardware and user space of process can share the same virtual address in the communication. Uacce create a chrdev for every registration, the queue is allocated to the process when the chrdev is opened. Then the process can access the hardware resource by interact with the queue file. By mmap the queue file space to user space, the process can directly put requests to the hardware without syscall to the kernel space. The IOMMU core only tracks mm<->device bonds at the moment, because it only needs to handle IOTLB invalidation and PASID table entries. However uacce needs a finer granularity since multiple queues from the same device can be bound to an mm. When the mm exits, all bound queues must be stopped so that the IOMMU can safely clear the PASID table entry and reallocate the PASID. An intermediate struct uacce_mm links uacce devices and queues. Note that an mm may be bound to multiple devices but an uacce_mm structure only ever belongs to a single device, because we don't need anything more complex (if multiple devices are bound to one mm, then we'll create one uacce_mm for each bond). uacce_device --+-- uacce_mm --+-- uacce_queue | '-- uacce_queue | '-- uacce_mm --+-- uacce_queue +-- uacce_queue '-- uacce_queue Reviewed-by: Greg Kroah-Hartman Reviewed-by: Jonathan Cameron Signed-off-by: Kenneth Lee Signed-off-by: Zaibo Xu Signed-off-by: Zhou Wang Signed-off-by: Jean-Philippe Brucker Signed-off-by: Zhangfei Gao Signed-off-by: Herbert Xu