wireguard-linux/drivers/mmc/host, branch jd/bump-compilers

mmc: cqhci: Fix checking of CQHCI_HALT state

2024-09-03T12:20:51Z

To check if mmc cqe is in halt state, need to check set/clear of CQHCI_HALT bit. At this time, we need to check with &, not &&. Fixes: a4080225f51d ("mmc: cqhci: support for command queue enabled host") Cc: stable@vger.kernel.org Signed-off-by: Seunghwan Baek Reviewed-by: Ritesh Harjani Acked-by: Adrian Hunter Link: https://lore.kernel.org/r/20240829061823.3718-2-sh8267.baek@samsung.com Signed-off-by: Ulf Hansson

mmc: dw_mmc: Fix IDMAC operation with pages bigger than 4K

2024-08-28T15:20:40Z

Commit 616f87661792 ("mmc: pass queue_limits to blk_mq_alloc_disk") [1] revealed the long living issue in dw_mmc.c driver, existing since the time when it was first introduced in commit f95f3850f7a9 ("mmc: dw_mmc: Add Synopsys DesignWare mmc host driver."), also making kernel boot broken on platforms using dw_mmc driver with 16K or 64K pages enabled, with this message in dmesg: mmcblk: probe of mmc0:0001 failed with error -22 That's happening because mmc_blk_probe() fails when it calls blk_validate_limits() consequently, which returns the error due to failed max_segment_size check in this code: /* * The maximum segment size has an odd historic 64k default that * drivers probably should override. Just like the I/O size we * require drivers to at least handle a full page per segment. */ ... if (WARN_ON_ONCE(lim->max_segment_size < PAGE_SIZE)) return -EINVAL; In case when IDMAC (Internal DMA Controller) is used, dw_mmc.c always sets .max_seg_size to 4 KiB: mmc->max_seg_size = 0x1000; The comment in the code above explains why it's incorrect. Arnd suggested setting .max_seg_size to .max_req_size to fix it, which is also what some other drivers are doing: $ grep -rl 'max_seg_size.*=.*max_req_size' drivers/mmc/host/ | \ wc -l 18 This change is not only fixing the boot with 16K/64K pages, but also leads to a better MMC performance. The linear write performance was tested on E850-96 board (eMMC only), before commit [1] (where it's possible to boot with 16K/64K pages without this fix, to be able to do a comparison). It was tested with this command: # dd if=/dev/zero of=somefile bs=1M count=500 oflag=sync Test results are as follows: - 4K pages, .max_seg_size = 4 KiB: 94.2 MB/s - 4K pages, .max_seg_size = .max_req_size = 512 KiB: 96.9 MB/s - 16K pages, .max_seg_size = 4 KiB: 126 MB/s - 16K pages, .max_seg_size = .max_req_size = 2 MiB: 128 MB/s - 64K pages, .max_seg_size = 4 KiB: 138 MB/s - 64K pages, .max_seg_size = .max_req_size = 8 MiB: 138 MB/s Unfortunately, SD card controller is not enabled in E850-96 yet, so it wasn't possible for me to run the test on some cheap SD cards to check this patch's impact on those. But it's possible that this change might also reduce the writes count, thus improving SD/eMMC longevity. All credit for the analysis and the suggested solution goes to Arnd. [1] https://lore.kernel.org/all/20240215070300.2200308-18-hch@lst.de/ Fixes: f95f3850f7a9 ("mmc: dw_mmc: Add Synopsys DesignWare mmc host driver.") Suggested-by: Arnd Bergmann Reported-by: Linux Kernel Functional Testing Closes: https://lore.kernel.org/all/CA+G9fYtddf2Fd3be+YShHP6CmSDNcn0ptW8qg+stUKW+Cn0rjQ@mail.gmail.com/ Signed-off-by: Sam Protsenko Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240306232052.21317-1-semen.protsenko@linaro.org Signed-off-by: Ulf Hansson

mmc: sdhci-of-aspeed: fix module autoloading

2024-08-28T14:56:19Z

Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based on the alias from of_device_id table. Signed-off-by: Liao Chen Acked-by: Andrew Jeffery Fixes: bb7b8ec62dfb ("mmc: sdhci-of-aspeed: Add support for the ASPEED SD controller") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240826124851.379759-1-liaochen4@huawei.com Signed-off-by: Ulf Hansson

mmc: dw_mmc: allow biu and ciu clocks to defer

2024-08-20T11:23:46Z

Fix a race condition if the clock provider comes up after mmc is probed, this causes mmc to fail without retrying. When given the DEFER error from the clk source, pass it on up the chain. Fixes: f90a0612f0e1 ("mmc: dw_mmc: lookup for optional biu and ciu clocks") Signed-off-by: Ben Whitten Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240811212212.123255-1-ben.whitten@gmail.com Signed-off-by: Ulf Hansson

mmc: mtk-sd: receive cmd8 data when hs400 tuning fail

2024-08-01T10:43:36Z

When we use cmd8 as the tuning command in hs400 mode, the command response sent back by some eMMC devices cannot be correctly sampled by MTK eMMC controller at some weak sample timing. In this case, command timeout error may occur. So we must receive the following data to make sure the next cmd8 send correctly. Signed-off-by: Mengqi Zhang Fixes: c4ac38c6539b ("mmc: mtk-sd: Add HS400 online tuning support") Cc: stable@vger.stable.com Link: https://lore.kernel.org/r/20240716013704.10578-1-mengqi.zhang@mediatek.com Signed-off-by: Ulf Hansson

Merge tag 'mfd-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

2024-07-18T00:42:20Z

Pull MFD updates from Lee Jones: "New Drivers: - ROHM BD96801 Power Management IC - Cirrus Logic CS40L50 Haptic Driver with Waveform Memory - Marvell 88PM886 Power Management IC New Device Support: - Keyboard Backlight to ChromeOS Embedded Controller - LEDs to ChromeOS Embedded Controller - Charge Control to ChromeOS Embedded Controller - HW Monitoring Service to ChromeOS Embedded Controller - AUXADCs to MediaTek MT635{7,8,9} Power Management ICs New Functionality: - Allow Syscon consumers to supply their own Regmaps on registration Fix-ups: - Constify/staticise applicable data structures - Remove superfluous/duplicated/unused sections - Device Tree binding adaptions/conversions/creation - Trivial; spelling, whitespace, coding-style adaptions - Utilise centrally provided helpers and macros to aid simplicity/duplication - Drop i2c_device_id::driver_data where the value is unused - Replace ACPI/DT firmware helpers with agnostic variants - Move over to GPIOD (descriptor-based) APIs - Annotate a bunch of __counted_by() cases - Straighten out some includes Bug Fixes: - Ensure potentially asserted recent lines are deasserted during initialisation - Avoid ".ko is added to multiple modules" warnings - Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings - Fix Wvoid-pointer-to-enum-cast warnings" * tag 'mfd-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (87 commits) mfd: timberdale: Attach device properties to TSC2007 board info mfd: tmio: Move header to platform_data mfd: tmio: Sanitize comments mfd: tmio: Update include files mmc: tmio/sdhi: Fix includes mfd: tmio: Remove obsolete io accessors mfd: tmio: Remove obsolete platform_data watchdog: bd96801_wdt: Add missing include for FIELD_*() dt-bindings: mfd: syscon: Add APM poweroff mailbox dt-bindings: mfd: syscon: Split and enforce documenting MFD children dt-bindings: mfd: rk817: Merge support for RK809 dt-bindings: mfd: rk817: Fixup clocks and reference dai-common dt-bindings: mfd: syscon: Add TI's opp table compatible mfd: omap-usb-tll: Use struct_size to allocate tll dt-bindings: mfd: Explain lack of child dependency in simple-mfd dt-bindings: mfd: Dual licensing for st,stpmic1 bindings mfd: omap-usb-tll: Annotate struct usbtll_omap with __counted_by mfd: tps6594-core: Remove unneeded semicolon in tps6594_check_crc_mode() mfd: lm3533: Move to new GPIO descriptor-based APIs mfd: tps65912: Use devm helper functions to simplify probe ...

mmc: sdhci-esdhc-imx: obtain the 'per' clock rate after its enablement

2024-07-12T09:07:15Z

The I.MX SDHCI driver assumes that the frequency of the 'per' clock can be obtained even on disabled clocks, which is not always the case. According to 'clk_get_rate' documentation, it is only valid once the clock source has been enabled. Signed-off-by: Ciprian Costea Reviewed-by: Haibo Chen Acked-by: Adrian Hunter Link: https://lore.kernel.org/r/20240708121018.246476-3-ciprianmarian.costea@oss.nxp.com Signed-off-by: Ulf Hansson

mmc: sdhci-esdhc-imx: disable card detect wake for S32G based platforms

2024-07-12T09:06:42Z

In case of S32G based platforms, GPIO CD used for card detect wake mechanism is not available. For this scenario the newly introduced flag 'ESDHC_FLAG_SKIP_CD_WAKE' is used. Signed-off-by: Ciprian Costea Reviewed-by: Haibo Chen Acked-by: Adrian Hunter Link: https://lore.kernel.org/r/20240708121018.246476-2-ciprianmarian.costea@oss.nxp.com Signed-off-by: Ulf Hansson

mmc: davinci_mmc: report all possible bus widths

2024-07-11T15:59:22Z

A dev_info() at probe's end() report the supported bus width. It never reports 8-bits width while the driver can handle it. Update the info message at then end of the probe to report the use of 8-bits data when needed. Signed-off-by: Bastien Curutchet Link: https://lore.kernel.org/r/20240711081838.47256-3-bastien.curutchet@bootlin.com Signed-off-by: Ulf Hansson

mmc: Merge branch fixes into next

2024-07-11T15:58:04Z

Merge the mmc fixes for v6.10-rc[n] into the next branch, to allow them to get tested together with the new mmc changes that are targeted for v6.11. Signed-off-by: Ulf Hansson