wireguard-linux/drivers/net/dsa/b53, branch jd/orphan-parallel

net: dsa: propagate switchdev vlan_filtering prepare phase to drivers

2020-10-05T12:56:48Z

A driver may refuse to enable VLAN filtering for any reason beyond what the DSA framework cares about, such as: - having tc-flower rules that rely on the switch being VLAN-aware - the particular switch does not support VLAN, even if the driver does (the DSA framework just checks for the presence of the .port_vlan_add and .port_vlan_del pointers) - simply not supporting this configuration to be toggled at runtime Currently, when a driver rejects a configuration it cannot support, it does this from the commit phase, which triggers various warnings in switchdev. So propagate the prepare phase to drivers, to give them the ability to refuse invalid configurations cleanly and avoid the warnings. Since we need to modify all function prototypes and check for the prepare phase from within the drivers, take that opportunity and move the existing driver restrictions within the prepare phase where that is possible and easy. Cc: Florian Fainelli Cc: Martin Blumenstingl Cc: Hauke Mehrtens Cc: Woojung Huh Cc: Microchip Linux Driver Support Cc: Sean Wang Cc: Landen Chao Cc: Andrew Lunn Cc: Vivien Didelot Cc: Jonathan McDowell Cc: Linus Walleij Cc: Alexandre Belloni Cc: Claudiu Manoil Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: dsa: b53: Set untag_bridge_pvid

2020-10-02T20:36:07Z

Indicate to the DSA receive path that we need to untage the bridge PVID, this allows us to remove the dsa_untag_bridge_pvid() calls from net/dsa/tag_brcm.c. Signed-off-by: Florian Fainelli Reviewed-by: Vladimir Oltean Signed-off-by: David S. Miller

net: dsa: b53: Configure VLANs while not filtering

2020-09-24T01:13:45Z

Update the B53 driver to support VLANs while not filtering. This requires us to enable VLAN globally within the switch upon driver initial configuration (dev->vlan_enabled). We also need to remove the code that dealt with PVID re-configuration in b53_vlan_filtering() since that function worked under the assumption that it would only be called to make a bridge VLAN filtering, or not filtering, and we would attempt to move the port's PVID accordingly. Now that VLANs are programmed all the time, even in the case of a non-VLAN filtering bridge, we would be programming a default_pvid for the bridged switch ports. We need the DSA receive path to pop the VLAN tag if it is the bridge's default_pvid because the CPU port is always programmed tagged in the programmed VLANs. In order to do so we utilize the dsa_untag_bridge_pvid() helper introduced in the commit before within net/dsa/tag_brcm.c. Acked-by: Vladimir Oltean Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

net: dsa: b53: Report VLAN table occupancy via devlink

2020-09-09T21:29:02Z

We already maintain an array of VLANs used by the switch so we can simply iterate over it to report the occupancy via devlink. Signed-off-by: Florian Fainelli Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2020-09-05T04:28:59Z

We got slightly different patches removing a double word in a comment in net/ipv4/raw.c - picked the version from net. Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached values instead of VNIC login response buffer (following what commit 507ebe6444a4 ("ibmvnic: Fix use-after-free of VNIC login response buffer") did). Signed-off-by: Jakub Kicinski

net: dsa: b53: Print err message on SW_RST timeout

2020-09-03T19:07:29Z

This allows us to differentiate between the possible failure modes of b53_switch_reset() by looking at the dmesg output. Signed-off-by: Paul Barker Acked-by: Florian Fainelli Signed-off-by: David S. Miller

net: dsa: b53: Use dev_{err,info} instead of pr_*

2020-09-03T19:07:29Z

This change allows us to see which device the err or info messages are referring to if we have multiple b53 compatible devices on a board. As this removes the only pr_*() calls in this file we can drop the definition of pr_fmt(). Signed-off-by: Paul Barker Signed-off-by: David S. Miller

treewide: Use fallthrough pseudo-keyword

2020-08-23T22:36:59Z

Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva

net: dsa: b53: check for timeout

2020-08-21T18:46:12Z

clang static analysis reports this problem b53_common.c:1583:13: warning: The left expression of the compound assignment is an uninitialized value. The computed value will also be garbage ent.port &= ~BIT(port); ~~~~~~~~ ^ ent is set by a successful call to b53_arl_read(). Unsuccessful calls are caught by an switch statement handling specific returns. b32_arl_read() calls b53_arl_op_wait() which fails with the unhandled -ETIMEDOUT. So add -ETIMEDOUT to the switch statement. Because b53_arl_op_wait() already prints out a message, do not add another one. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Tom Rix Acked-by: Florian Fainelli Signed-off-by: David S. Miller

net: dsa: b53: Fixup endianness warnings

2020-07-05T22:45:38Z

leX_to_cpu() expects to be passed an __leX type. Signed-off-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller