wireguard-linux/drivers/net/dsa, branch jd/shorter-socket-lock

net: Make PTP-specific drivers depend on PTP_1588_CLOCK

2020-05-01T22:27:51Z

Commit d1cbfd771ce8 ("ptp_clock: Allow for it to be optional") changed all PTP-capable Ethernet drivers from `select PTP_1588_CLOCK` to `imply PTP_1588_CLOCK`, "in order to break the hard dependency between the PTP clock subsystem and ethernet drivers capable of being clock providers." As a result it is possible to build PTP-capable Ethernet drivers without the PTP subsystem by deselecting PTP_1588_CLOCK. Drivers are required to handle the missing dependency gracefully. Some PTP-capable Ethernet drivers (e.g., TI_CPSW) factor their PTP code out into separate drivers (e.g., TI_CPTS_MOD). The above commit also changed these PTP-specific drivers to `imply PTP_1588_CLOCK`, making it possible to build them without the PTP subsystem. But as Grygorii Strashko noted in [1]: On Wed, Apr 22, 2020 at 02:16:11PM +0300, Grygorii Strashko wrote: > Another question is that CPTS completely nonfunctional in this case and > it was never expected that somebody will even try to use/run such > configuration (except for random build purposes). In my view, enabling a PTP-specific driver without the PTP subsystem is a configuration error made possible by the above commit. Kconfig should not allow users to create a configuration with missing dependencies that results in "completely nonfunctional" drivers. I audited all network drivers that call ptp_clock_register() but merely `imply PTP_1588_CLOCK` and found five PTP-specific drivers that are likely nonfunctional without PTP_1588_CLOCK: NET_DSA_MV88E6XXX_PTP NET_DSA_SJA1105_PTP MACB_USE_HWSTAMP CAVIUM_PTP TI_CPTS_MOD Note how these symbols all reference PTP or timestamping in their name; this is a clue that they depend on PTP_1588_CLOCK. Change them from `imply PTP_1588_CLOCK` [2] to `depends on PTP_1588_CLOCK`. I'm not using `select PTP_1588_CLOCK` here because PTP_1588_CLOCK has its own dependencies, which `select` would not transitively apply. Additionally, remove the `select NET_PTP_CLASSIFY` from CPTS_TI_MOD; PTP_1588_CLOCK already selects that. [1]: https://lore.kernel.org/lkml/c04458ed-29ee-1797-3a11-7f3f560553e6@ti.com/ [2]: NET_DSA_SJA1105_PTP had never declared any type of dependency on PTP_1588_CLOCK (`imply` or otherwise); adding a `depends on PTP_1588_CLOCK` here seems appropriate. Cc: Arnd Bergmann Cc: Richard Cochran Cc: Nicolas Pitre Cc: Grygorii Strashko Cc: Geert Uytterhoeven Fixes: d1cbfd771ce8 ("ptp_clock: Allow for it to be optional") Signed-off-by: Clay McClure Signed-off-by: David S. Miller

net: dsa: mv88e6xxx: remove duplicate assignment of struct members

2020-04-29T19:14:48Z

These struct members named 'phylink_validate' was assigned twice: static const struct mv88e6xxx_ops mv88e6190_ops = { ...... .phylink_validate = mv88e6390_phylink_validate, ...... .phylink_validate = mv88e6390_phylink_validate, }; static const struct mv88e6xxx_ops mv88e6190x_ops = { ...... .phylink_validate = mv88e6390_phylink_validate, ...... .phylink_validate = mv88e6390x_phylink_validate, }; static const struct mv88e6xxx_ops mv88e6191_ops = { ...... .phylink_validate = mv88e6390_phylink_validate, ...... .phylink_validate = mv88e6390_phylink_validate, }; static const struct mv88e6xxx_ops mv88e6290_ops = { ...... .phylink_validate = mv88e6390_phylink_validate, ...... .phylink_validate = mv88e6390_phylink_validate, }; Remove all the first one and leave the second one which are been used in fact. Be aware that for 'mv88e6190x_ops' the assignment functions is different while the others are all the same. This fixes the following coccicheck warning: drivers/net/dsa/mv88e6xxx/chip.c:3911:48-49: phylink_validate: first occurrence line 3965, second occurrence line 3967 drivers/net/dsa/mv88e6xxx/chip.c:3970:49-50: phylink_validate: first occurrence line 4024, second occurrence line 4026 drivers/net/dsa/mv88e6xxx/chip.c:4029:48-49: phylink_validate: first occurrence line 4082, second occurrence line 4085 drivers/net/dsa/mv88e6xxx/chip.c:4184:48-49: phylink_validate: first occurrence line 4238, second occurrence line 4242 Fixes: 4262c38dc42e ("net: dsa: mv88e6xxx: Add SERDES stats counters to all 6390 family members") Signed-off-by: Jason Yan Reviewed-by: Russell King Signed-off-by: David S. Miller

net: dsa: b53: b53_arl_rw_op() needs to select IVL or SVL

2020-04-22T19:50:41Z

Flip the IVL_SVL_SELECT bit correctly based on the VLAN enable status, the default is to perform Shared VLAN learning instead of Individual learning. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

net: dsa: b53: Rework ARL bin logic

2020-04-22T19:50:41Z

When asking the ARL to read a MAC address, we will get a number of bins returned in a single read. Out of those bins, there can essentially be 3 states: - all bins are full, we have no space left, and we can either replace an existing address or return that full condition - the MAC address was found, then we need to return its bin index and modify that one, and only that one - the MAC address was not found and we have a least one bin free, we use that bin index location then The code would unfortunately fail on all counts. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

net: dsa: b53: Fix ARL register definitions

2020-04-22T19:50:41Z

The ARL {MAC,VID} tuple and the forward entry were off by 0x10 bytes, which means that when we read/wrote from/to ARL bin index 0, we were actually accessing the ARLA_RWCTRL register. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Reviewed-by: Andrew Lunn Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

net: dsa: b53: Fix valid setting for MDB entries

2020-04-22T19:50:41Z

When support for the MDB entries was added, the valid bit was correctly changed to be assigned depending on the remaining port bitmask, that is, if there were no more ports added to the entry's port bitmask, the entry now becomes invalid. There was another assignment a few lines below that would override this which would invalidate entries even when there were still multiple ports left in the MDB entry. Fixes: 5d65b64a3d97 ("net: dsa: b53: Add support for MDB") Reviewed-by: Andrew Lunn Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

net: dsa: b53: Lookup VID in ARL searches when VLAN is enabled

2020-04-22T19:50:41Z

When VLAN is enabled, and an ARL search is issued, we also need to compare the full {MAC,VID} tuple before returning a successful search result. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Reviewed-by: Andrew Lunn Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode

2020-04-16T20:32:05Z

In VLAN-unaware mode, the Egress Tag (EG_TAG) field in Port VLAN Control register must be set to Consistent to let tagged frames pass through as is, otherwise their tags will be stripped. Fixes: 83163f7dca56 ("net: dsa: mediatek: add VLAN support for MT7530") Signed-off-by: DENG Qingfang Reviewed-by: Florian Fainelli Tested-by: René van Dorst Signed-off-by: David S. Miller

net: mscc: ocelot: fix untagged packet drops when enslaving to vlan aware bridge

2020-04-15T19:27:35Z

To rehash a previous explanation given in commit 1c44ce560b4d ("net: mscc: ocelot: fix vlan_filtering when enslaving to bridge before link is up"), the switch driver operates the in a mode where a single VLAN can be transmitted as untagged on a particular egress port. That is the "native VLAN on trunk port" use case. The configuration for this native VLAN is driven in 2 ways: - Set the egress port rewriter to strip the VLAN tag for the native VID (as it is egress-untagged, after all). - Configure the ingress port to drop untagged and priority-tagged traffic, if there is no native VLAN. The intention of this setting is that a trunk port with no native VLAN should not accept untagged traffic. Since both of the above configurations for the native VLAN should only be done if VLAN awareness is requested, they are actually done from the ocelot_port_vlan_filtering function, after the basic procedure of toggling the VLAN awareness flag of the port. But there's a problem with that simplistic approach: we are trying to juggle with 2 independent variables from a single function: - Native VLAN of the port - its value is held in port->vid. - VLAN awareness state of the port - currently there are some issues here, more on that later*. The actual problem can be seen when enslaving the switch ports to a VLAN filtering bridge: 0. The driver configures a pvid of zero for each port, when in standalone mode. While the bridge configures a default_pvid of 1 for each port that gets added as a slave to it. 1. The bridge calls ocelot_port_vlan_filtering with vlan_aware=true. The VLAN-filtering-dependent portion of the native VLAN configuration is done, considering that the native VLAN is 0. 2. The bridge calls ocelot_vlan_add with vid=1, pvid=true, untagged=true. The native VLAN changes to 1 (change which gets propagated to hardware). 3. ??? - nobody calls ocelot_port_vlan_filtering again, to reapply the VLAN-filtering-dependent portion of the native VLAN configuration, for the new native VLAN of 1. One can notice that after toggling "ip link set dev br0 type bridge vlan_filtering 0 && ip link set dev br0 type bridge vlan_filtering 1", the new native VLAN finally makes it through and untagged traffic finally starts flowing again. But obviously that shouldn't be needed. So it is clear that 2 independent variables need to both re-trigger the native VLAN configuration. So we introduce the second variable as ocelot_port->vlan_aware. *Actually both the DSA Felix driver and the Ocelot driver already had each its own variable: - Ocelot: ocelot_port_private->vlan_aware - Felix: dsa_port->vlan_filtering but the common Ocelot library needs to work with a single, common, variable, so there is some refactoring done to move the vlan_aware property from the private structure into the common ocelot_port structure. Fixes: 97bb69e1e36e ("net: mscc: ocelot: break apart ocelot_vlan_port_apply") Signed-off-by: Vladimir Oltean Reviewed-by: Horatiu Vultur Signed-off-by: David S. Miller

net: dsa: mv88e6xxx: Configure MAC when using fixed link

2020-04-14T23:33:25Z

The 88e6185 is reporting it has detected a PHY, when a port is connected to an SFP. As a result, the fixed-phy configuration is not being applied. That then breaks packet transfer, since the port is reported as being down. Add additional conditions to check the interface mode, and if it is fixed always configure the port on link up/down, independent of the PPU status. Fixes: 30c4a5b0aad8 ("net: mv88e6xxx: use resolved link config in mac_link_up()") Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller