wireguard-linux/drivers/net/ethernet/intel/Kconfig, branch jd/orphan-parallel

ice: implement device flash update via devlink

2020-07-29T00:07:06Z

Use the newly added pldmfw library to implement device flash update for the Intel ice networking device driver. This support uses the devlink flash update interface. The main parts of the flash include the Option ROM, the netlist module, and the main NVM data. The PLDM firmware file contains modules for each of these components. Using the pldmfw library, the provided firmware file will be scanned for the three major components, "fw.undi" for the Option ROM, "fw.mgmt" for the main NVM module containing the primary device firmware, and "fw.netlist" containing the netlist module. The flash is separated into two banks, the active bank containing the running firmware, and the inactive bank which we use for update. Each module is updated in a staged process. First, the inactive bank is erased, preparing the device for update. Second, the contents of the component are copied to the inactive portion of the flash. After all components are updated, the driver signals the device to switch the active bank during the next EMP reset (which would usually occur during the next reboot). Although the firmware AdminQ interface does report an immediate status for each command, the NVM erase and NVM write commands receive status asynchronously. The driver must not continue writing until previous erase and write commands have finished. The real status of the NVM commands is returned over the receive AdminQ. Implement a simple interface that uses a wait queue so that the main update thread can sleep until the completion status is reported by firmware. For erasing the inactive banks, this can take quite a while in practice. To help visualize the process to the devlink application and other applications based on the devlink netlink interface, status is reported via the devlink_flash_update_status_notify. While we do report status after each 4k block when writing, there is no real status we can report during erasing. We simply must wait for the complete module erasure to finish. With this implementation, basic flash update for the ice hardware is supported. Signed-off-by: Jacob Keller Signed-off-by: David S. Miller

docs: networking: reorganize driver documentation again

2020-06-26T23:08:44Z

Organize driver documentation by device type. Most documents have fairly verbose yet uninformative names, so let users first select a well defined device type, and then search for a particular driver. While at it rename the section from Vendor drivers to Hardware drivers. This seems more accurate, besides people sometimes refer to out-of-tree drivers as vendor drivers. Signed-off-by: Jakub Kicinski Acked-by: Jeff Kirsher Acked-by: Shannon Nelson Signed-off-by: David S. Miller

treewide: replace '---help---' in Kconfig files with 'help'

2020-06-13T16:57:21Z

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada

ice: enable initial devlink support

2020-03-21T07:55:42Z

Begin implementing support for the devlink interface with the ice driver. The pf structure is currently memory managed through devres, via a devm_alloc. To mimic this behavior, after allocating the devlink pointer, use devm_add_action to add a teardown action for releasing the devlink memory on exit. The ice hardware is a multi-function PCIe device. Thus, each physical function will get its own devlink instance. This means that each function will be treated independently, with its own parameters and configuration. This is done because the ice driver loads a separate instance for each function. Due to this, the implementation does not enable devlink to manage device-wide resources or configuration, as each physical function will be treated independently. This is done for simplicity, as managing a devlink instance across multiple driver instances would significantly increase the complexity for minimal gain. Signed-off-by: Jacob Keller Reviewed-by: Jesse Brandeburg Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46Z

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

ixgbe: fix Kconfig when driver is not a module

2019-01-04T22:02:16Z

The new ability added to the driver to use mii_bus to handle MII related ioctls is causing compile issues when the driver is compiled into the kernel (i.e. not a module). The problem was in selecting MDIO_DEVICE instead of the preferred PHYLIB Kconfig option. The reason being that MDIO_DEVICE had a dependency on PHYLIB and would be compiled as a module when PHYLIB was a module, no matter whether ixgbe was compiled into the kernel. CC: Dave Jones CC: Steve Douthit CC: Florian Fainelli Signed-off-by: Jeff Kirsher Reviewed-by: Stephen Douthit Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

ixgbe: register a mdiobus

2018-12-20T20:19:11Z

Most dsa devices expect a 'struct mii_bus' pointer to talk to switches via the MII interface. While this works for dsa devices, it will not work safely with Linux PHYs in all configurations since the firmware of the ixgbe device may be polling some PHY addresses in the background. Signed-off-by: Stephen Douthit Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher

net: documentation: build a directory structure for drivers

2018-12-05T19:30:06Z

Documentation/networking/ is full of cryptically named files with driver documentation. This makes finding interesting information at a glance really hard. Move all those files into a directory called device_drivers (since not all drivers are for device) and fix up references. RFC v0.1 -> RFC v1: - also add .txt suffix to the files which are missing it (Quentin) Signed-off-by: Jakub Kicinski Reviewed-by: Quentin Monnet Acked-by: David Ahern Acked-by: Henrik Austad Signed-off-by: David S. Miller

ixgbe/ixgbevf: fix XFRM_ALGO dependency

2018-10-31T17:53:15Z

Based on the original work from Arnd Bergmann. When XFRM_ALGO is not enabled, the new ixgbe IPsec code produces a link error: drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.o: In function `ixgbe_ipsec_vf_add_sa': ixgbe_ipsec.c:(.text+0x1266): undefined reference to `xfrm_aead_get_byname' Simply selecting XFRM_ALGO from here causes circular dependencies, so to fix it, we probably want this slightly more complex solution that is similar to what other drivers with XFRM offload do: A separate Kconfig symbol now controls whether we include the IPsec offload code. To keep the old behavior, this is left as 'default y'. The dependency in XFRM_OFFLOAD still causes a circular dependency but is not actually needed because this symbol is not user visible, so removing that dependency on top makes it all work. CC: Arnd Bergmann CC: Shannon Nelson Fixes: eda0333ac293 ("ixgbe: add VF IPsec management") Signed-off-by: Jeff Kirsher Tested-by: Andrew Bowers

Documentation: intel: Convert to RST format

2018-10-18T19:41:29Z

Now that the documents have been updated to conform to the reStructured Text guidelines, we can now change the file extensions and update the other related references. This converts all of the Intel wired LAN driver documentation to *.rst. Signed-off-by: Jeff Kirsher Tested-by: Andrew Bowers Tested-by: Aaron Brown