wireguard-linux/drivers/net/ethernet/intel/libie, branch stable

libie: add bookkeeping support for control queue messages

2026-08-12T20:56:51Z

Small send control queue message buffers are managed and reused by libie itself, bigger send buffers are consumed. All are tracked with the unique transaction (Xn) ids until they receive response or time out. Responses can be received out of order, therefore transactions are stored in an array and tracked though a bitmap. Rx buffers utilize page_pool. Pre-allocated DMA memory is used where possible. It reduces the driver overhead in handling memory allocation/free and message timeouts. Reviewed-by: Maciej Fijalkowski Signed-off-by: Phani R Burra Co-developed-by: Victor Raj Signed-off-by: Victor Raj Co-developed-by: Pavan Kumar Linga Signed-off-by: Pavan Kumar Linga Tested-by: Bharath R Tested-by: Samuel Salin Co-developed-by: Larysa Zaremba Signed-off-by: Larysa Zaremba Signed-off-by: Tony Nguyen

libie: add control queue support

2026-08-12T20:56:51Z

Libie will now support control queue setup and configuration APIs. These are mainly used for mailbox communication between drivers and control plane. Make use of the libeth_rx page pool support for managing controlq buffers. Reviewed-by: Maciej Fijalkowski Signed-off-by: Phani R Burra Co-developed-by: Victor Raj Signed-off-by: Victor Raj Co-developed-by: Sridhar Samudrala Signed-off-by: Sridhar Samudrala Co-developed-by: Pavan Kumar Linga Signed-off-by: Pavan Kumar Linga Tested-by: Samuel Salin Tested-by: Bharath R Co-developed-by: Larysa Zaremba Signed-off-by: Larysa Zaremba Signed-off-by: Tony Nguyen

libie: add PCI device initialization helpers to libie

2026-08-12T20:56:50Z

idpf and ixd drivers serve different PCI functions on the same device, therefore their PCI configuration flow is very similar. Add support functions for idpf and ixd to configure PCI functionality and access MMIO space. Add a mapping list which can be traversed by a driver, e.g. to pass certain I/O mappings to the auxbus devices. Such list is also traversed by the libie_pci_get_mmio_addr() helper, which allows for easier memory access. Reviewed-by: Maciej Fijalkowski Signed-off-by: Phani R Burra Co-developed-by: Victor Raj Signed-off-by: Victor Raj Co-developed-by: Sridhar Samudrala Signed-off-by: Sridhar Samudrala Co-developed-by: Pavan Kumar Linga Signed-off-by: Pavan Kumar Linga Tested-by: Bharath R Tested-by: Samuel Salin Co-developed-by: Larysa Zaremba Signed-off-by: Larysa Zaremba Signed-off-by: Tony Nguyen

libie: prevent memleak in fwlog code

2026-03-17T21:12:36Z

All cmd_buf buffers are allocated and need to be freed after usage. Add an error unwinding path that properly frees these buffers. The memory leak happens whenever fwlog configuration is changed. For example: $echo 256K > /sys/kernel/debug/ixgbe/0000\:32\:00.0/fwlog/log_size Fixes: 96a9a9341cda ("ice: configure FW logging") Reviewed-by: Aleksandr Loktionov Signed-off-by: Michal Swiatkowski Reviewed-by: Simon Horman Tested-by: Rinitha S (A Contingent worker at Intel) Signed-off-by: Tony Nguyen

libie: don't unroll if fwlog isn't supported

2026-03-03T21:06:04Z

The libie_fwlog_deinit() function can be called during driver unload even when firmware logging was never properly initialized. This led to call trace: [ 148.576156] Oops: Oops: 0000 [#1] SMP NOPTI [ 148.576167] CPU: 80 UID: 0 PID: 12843 Comm: rmmod Kdump: loaded Not tainted 6.17.0-rc7next-queue-3oct-01915-g06d79d51cf51 #1 PREEMPT(full) [ 148.576177] Hardware name: HPE ProLiant DL385 Gen10 Plus/ProLiant DL385 Gen10 Plus, BIOS A42 07/18/2020 [ 148.576182] RIP: 0010:__dev_printk+0x16/0x70 [ 148.576196] Code: 1f 44 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 41 55 41 54 49 89 d4 55 48 89 fd 53 48 85 f6 74 3c <4c> 8b 6e 50 48 89 f3 4d 85 ed 75 03 4c 8b 2e 48 89 df e8 f3 27 98 [ 148.576204] RSP: 0018:ffffd2fd7ea17a48 EFLAGS: 00010202 [ 148.576211] RAX: ffffd2fd7ea17aa0 RBX: ffff8eb288ae2000 RCX: 0000000000000000 [ 148.576217] RDX: ffffd2fd7ea17a70 RSI: 00000000000000c8 RDI: ffffffffb68d3d88 [ 148.576222] RBP: ffffffffb68d3d88 R08: 0000000000000000 R09: 0000000000000000 [ 148.576227] R10: 00000000000000c8 R11: ffff8eb2b1a49400 R12: ffffd2fd7ea17a70 [ 148.576231] R13: ffff8eb3141fb000 R14: ffffffffc1215b48 R15: ffffffffc1215bd8 [ 148.576236] FS: 00007f5666ba6740(0000) GS:ffff8eb2472b9000(0000) knlGS:0000000000000000 [ 148.576242] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 148.576247] CR2: 0000000000000118 CR3: 000000011ad17000 CR4: 0000000000350ef0 [ 148.576252] Call Trace: [ 148.576258] [ 148.576269] _dev_warn+0x7c/0x96 [ 148.576290] libie_fwlog_deinit+0x112/0x117 [libie_fwlog] [ 148.576303] ixgbe_remove+0x63/0x290 [ixgbe] [ 148.576342] pci_device_remove+0x42/0xb0 [ 148.576354] device_release_driver_internal+0x19c/0x200 [ 148.576365] driver_detach+0x48/0x90 [ 148.576372] bus_remove_driver+0x6d/0xf0 [ 148.576383] pci_unregister_driver+0x2e/0xb0 [ 148.576393] ixgbe_exit_module+0x1c/0xd50 [ixgbe] [ 148.576430] __do_sys_delete_module.isra.0+0x1bc/0x2e0 [ 148.576446] do_syscall_64+0x7f/0x980 It can be reproduced by trying to unload ixgbe driver in recovery mode. Fix that by checking if fwlog is supported before doing unroll. Fixes: 641585bc978e ("ixgbe: fwlog support for e610") Reviewed-by: Aleksandr Loktionov Signed-off-by: Michal Swiatkowski Reviewed-by: Simon Horman Tested-by: Rinitha S (A Contingent worker at Intel) Signed-off-by: Tony Nguyen

Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses

2026-02-22T16:26:33Z

Conversion performed via this Coccinelle script: // SPDX-License-Identifier: GPL-2.0-only // Options: --include-headers-for-types --all-includes --include-headers --keep-comments virtual patch @gfp depends on patch && !(file in "tools") && !(file in "samples")@ identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex, kzalloc_obj,kzalloc_objs,kzalloc_flex, kvmalloc_obj,kvmalloc_objs,kvmalloc_flex, kvzalloc_obj,kvzalloc_objs,kvzalloc_flex}; @@ ALLOC(... - , GFP_KERNEL ) $ make coccicheck MODE=patch COCCI=gfp.cocci Build and boot tested x86_64 with Fedora 42's GCC and Clang: Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01 Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01 Signed-off-by: Kees Cook Signed-off-by: Linus Torvalds

Convert more 'alloc_obj' cases to default GFP_KERNEL arguments

2026-02-22T04:03:00Z

This converts some of the visually simpler cases that have been split over multiple lines. I only did the ones that are easy to verify the resulting diff by having just that final GFP_KERNEL argument on the next line. Somebody should probably do a proper coccinelle script for this, but for me the trivial script actually resulted in an assertion failure in the middle of the script. I probably had made it a bit _too_ trivial. So after fighting that far a while I decided to just do some of the syntactically simpler cases with variations of the previous 'sed' scripts. The more syntactically complex multi-line cases would mostly really want whitespace cleanup anyway. Signed-off-by: Linus Torvalds

Convert 'alloc_obj' family to use the new default GFP_KERNEL argument

2026-02-22T01:09:51Z

This was done entirely with mindless brute force, using git grep -l '\

treewide: Replace kmalloc with kmalloc_obj for non-scalar types

2026-02-21T09:02:28Z

This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2025-09-25T18:00:59Z

Cross-merge networking fixes after downstream PR (net-6.17-rc8). Conflicts: drivers/net/can/spi/hi311x.c 6b6968084721 ("can: hi311x: fix null pointer dereference when resuming from sleep before interface was enabled") 27ce71e1ce81 ("net: WQ_PERCPU added to alloc_workqueue users") https://lore.kernel.org/72ce7599-1b5b-464a-a5de-228ff9724701@kernel.org net/smc/smc_loopback.c drivers/dibs/dibs_loopback.c a35c04de2565 ("net/smc: fix warning in smc_rx_splice() when calling get_page()") cc21191b584c ("dibs: Move data path to dibs layer") https://lore.kernel.org/74368a5c-48ac-4f8e-a198-40ec1ed3cf5f@kernel.org Adjacent changes: drivers/net/dsa/lantiq/lantiq_gswip.c c0054b25e2f1 ("net: dsa: lantiq_gswip: move gswip_add_single_port_br() call to port_setup()") 7a1eaef0a791 ("net: dsa: lantiq_gswip: support model-specific mac_select_pcs()") Signed-off-by: Jakub Kicinski