wireguard-linux/drivers/net/ethernet/mscc, branch jd/unified-crypt-queue

net: mscc: ocelot: deal with problematic MAC_ETYPE VCAP IS2 rules

2020-04-18T22:54:11Z

By default, the VCAP IS2 will produce a single match for each frame, on the most specific classification. Example: a ping packet (ICMP over IPv4 over Ethernet) sent from an IP address of 10.0.0.1 and a MAC address of 96:18:82:00:04:01 will match this rule: tc filter add dev swp0 ingress protocol ipv4 \ flower skip_sw src_ip 10.0.0.1 action drop but not this one: tc filter add dev swp0 ingress \ flower skip_sw src_mac 96:18:82:00:04:01 action drop Currently the driver does not really warn the user in any way about this, and the behavior is rather strange anyway. The current patch is a workaround to force matches on MAC_ETYPE keys (DMAC and SMAC) for all packets irrespective of higher layer protocol. The setting is made at the port level. Of course this breaks all other non-src_mac and non-dst_mac matches, so rule exclusivity checks have been added to the driver, in order to never have rules of both types on any ingress port. The bits that discard higher-level protocol information are set only once a MAC_ETYPE rule is added to a filter block, and only for the ports that are bound to that filter block. Then all further non-MAC_ETYPE rules added to that filter block should be denied by the ports bound to it. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: mscc: ocelot: fix untagged packet drops when enslaving to vlan aware bridge

2020-04-15T19:27:35Z

To rehash a previous explanation given in commit 1c44ce560b4d ("net: mscc: ocelot: fix vlan_filtering when enslaving to bridge before link is up"), the switch driver operates the in a mode where a single VLAN can be transmitted as untagged on a particular egress port. That is the "native VLAN on trunk port" use case. The configuration for this native VLAN is driven in 2 ways: - Set the egress port rewriter to strip the VLAN tag for the native VID (as it is egress-untagged, after all). - Configure the ingress port to drop untagged and priority-tagged traffic, if there is no native VLAN. The intention of this setting is that a trunk port with no native VLAN should not accept untagged traffic. Since both of the above configurations for the native VLAN should only be done if VLAN awareness is requested, they are actually done from the ocelot_port_vlan_filtering function, after the basic procedure of toggling the VLAN awareness flag of the port. But there's a problem with that simplistic approach: we are trying to juggle with 2 independent variables from a single function: - Native VLAN of the port - its value is held in port->vid. - VLAN awareness state of the port - currently there are some issues here, more on that later*. The actual problem can be seen when enslaving the switch ports to a VLAN filtering bridge: 0. The driver configures a pvid of zero for each port, when in standalone mode. While the bridge configures a default_pvid of 1 for each port that gets added as a slave to it. 1. The bridge calls ocelot_port_vlan_filtering with vlan_aware=true. The VLAN-filtering-dependent portion of the native VLAN configuration is done, considering that the native VLAN is 0. 2. The bridge calls ocelot_vlan_add with vid=1, pvid=true, untagged=true. The native VLAN changes to 1 (change which gets propagated to hardware). 3. ??? - nobody calls ocelot_port_vlan_filtering again, to reapply the VLAN-filtering-dependent portion of the native VLAN configuration, for the new native VLAN of 1. One can notice that after toggling "ip link set dev br0 type bridge vlan_filtering 0 && ip link set dev br0 type bridge vlan_filtering 1", the new native VLAN finally makes it through and untagged traffic finally starts flowing again. But obviously that shouldn't be needed. So it is clear that 2 independent variables need to both re-trigger the native VLAN configuration. So we introduce the second variable as ocelot_port->vlan_aware. *Actually both the DSA Felix driver and the Ocelot driver already had each its own variable: - Ocelot: ocelot_port_private->vlan_aware - Felix: dsa_port->vlan_filtering but the common Ocelot library needs to work with a single, common, variable, so there is some refactoring done to move the vlan_aware property from the private structure into the common ocelot_port structure. Fixes: 97bb69e1e36e ("net: mscc: ocelot: break apart ocelot_vlan_port_apply") Signed-off-by: Vladimir Oltean Reviewed-by: Horatiu Vultur Signed-off-by: David S. Miller

net: dsa: felix: add port policers

2020-03-30T18:44:00Z

This patch is a trivial passthrough towards the ocelot library, which support port policers since commit 2c1d029a017f ("net: mscc: ocelot: Implement port policers via tc command"). Some data structure conversion between the DSA core and the Ocelot library is necessary, for policer parameters. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: mscc: ocelot: add action of police on vcap_is2

2020-03-30T18:44:00Z

Ocelot has 384 policers that can be allocated to ingress ports, QoS classes per port, and VCAP IS2 entries. ocelot_police.c supports to set policers which can be allocated to police action of VCAP IS2. We allocate policers from maximum pol_id, and decrease the pol_id when add a new vcap_is2 entry which is police action. Signed-off-by: Xiaoliang Yang Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: sched: expose HW stats types per action used by drivers

2020-03-30T18:06:49Z

It may be up to the driver (in case ANY HW stats is passed) to select which type of HW stats he is going to use. Add an infrastructure to expose this information to user. $ tc filter add dev enp3s0np1 ingress proto ip handle 1 pref 1 flower dst_ip 192.168.1.1 action drop $ tc -s filter show dev enp3s0np1 ingress filter protocol ip pref 1 flower chain 0 filter protocol ip pref 1 flower chain 0 handle 0x1 eth_type ipv4 dst_ip 192.168.1.1 in_hw in_hw_count 2 action order 1: gact action drop random type none pass val 0 index 1 ref 1 bind 1 installed 10 sec used 10 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 used_hw_stats immediate <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller

net: dsa: felix: support changing the MTU

2020-03-27T23:07:25Z

Changing the MTU for this switch means altering the DEV_GMII:MAC_CFG_STATUS:MAC_MAXLEN_CFG field MAX_LEN, which in turn limits the size of frames that can be received. Special accounting needs to be done for the DSA CPU port (NPI port in hardware terms). The NPI port configuration needs to be held inside the private ocelot structure, since it is now accessed from multiple places. Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: rename flow_action_hw_stats_types* -> flow_action_hw_stats*

2020-03-18T04:12:39Z

flow_action_hw_stats_types_check() helper takes one of the FLOW_ACTION_HW_STATS_*_BIT values as input. If we align the arguments to the opening bracket of the helper there is no way to call this helper and stay under 80 characters. Remove the "types" part from the new flow_action helpers and enum values. Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller

net: mscc: ocelot: adjust maxlen on NPI port, not CPU

2020-03-15T07:16:40Z

Being a non-physical port, the CPU port does not have an ocelot_port structure, so the ocelot_port_writel call inside the ocelot_port_set_maxlen() function would access data behind a NULL pointer. This is a patch for net-next only, the net tree boots fine, the bug was introduced during the net -> net-next merge. Fixes: 1d3435793123 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net") Fixes: a8015ded89ad ("net: mscc: ocelot: properly account for VLAN header length when setting MRU") Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2020-03-13T05:34:48Z

Minor overlapping changes, nothing serious. Signed-off-by: David S. Miller

net: mscc: ocelot: properly account for VLAN header length when setting MRU

2020-03-10T01:58:17Z

What the driver writes into MAC_MAXLEN_CFG does not actually represent VLAN_ETH_FRAME_LEN but instead ETH_FRAME_LEN + ETH_FCS_LEN. Yes they are numerically equal, but the difference is important, as the switch treats VLAN-tagged traffic specially and knows to increase the maximum accepted frame size automatically. So it is always wrong to account for VLAN in the MAC_MAXLEN_CFG register. Unconditionally increase the maximum allowed frame size for double-tagged traffic. Accounting for the additional length does not mean that the other VLAN membership checks aren't performed, so there's no harm done. Also, stop abusing the MTU name for configuring the MRU. There is no support for configuring the MRU on an interface at the moment. Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support") Fixes: fa914e9c4d94 ("net: mscc: ocelot: create a helper for changing the port MTU") Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller