wireguard-linux/drivers/net/ethernet/stmicro, branch jd/bump-compilers

net: stmmac: silence FPE kernel logs

2024-09-10T23:42:12Z

ethtool --show-mm can get real-time state of FPE. fpe_irq_status logs should keep quiet. tc-taprio can always query driver state, delete unbalanced logs. Signed-off-by: Furong Xu <0x1207@gmail.com> Reviewed-by: Vladimir Oltean Link: https://patch.msgid.link/39943d7967f291674a97ef0572878aca273087e9.1725631883.git.0x1207@gmail.com Signed-off-by: Jakub Kicinski

net: stmmac: support fp parameter of tc-taprio

2024-09-10T23:42:12Z

tc-taprio can select whether traffic classes are express or preemptible. 0) tc qdisc add dev eth1 parent root handle 100 taprio \ num_tc 4 \ map 0 1 2 3 2 2 2 2 2 2 2 2 2 2 2 3 \ queues 1@0 1@1 1@2 1@3 \ base-time 1000000000 \ sched-entry S 03 10000000 \ sched-entry S 0e 10000000 \ flags 0x2 fp P E E E 1) After some traffic tests, MAC merge layer statistics are all good. Local device: [ { "ifname": "eth1", "pmac-enabled": true, "tx-enabled": true, "tx-active": true, "tx-min-frag-size": 60, "rx-min-frag-size": 60, "verify-enabled": true, "verify-time": 100, "max-verify-time": 128, "verify-status": "SUCCEEDED", "statistics": { "MACMergeFrameAssErrorCount": 0, "MACMergeFrameSmdErrorCount": 0, "MACMergeFrameAssOkCount": 0, "MACMergeFragCountRx": 0, "MACMergeFragCountTx": 17837, "MACMergeHoldCount": 18639 } } ] Remote device: [ { "ifname": "end1", "pmac-enabled": true, "tx-enabled": true, "tx-active": true, "tx-min-frag-size": 60, "rx-min-frag-size": 60, "verify-enabled": true, "verify-time": 100, "max-verify-time": 128, "verify-status": "SUCCEEDED", "statistics": { "MACMergeFrameAssErrorCount": 0, "MACMergeFrameSmdErrorCount": 0, "MACMergeFrameAssOkCount": 17189, "MACMergeFragCountRx": 17837, "MACMergeFragCountTx": 0, "MACMergeHoldCount": 0 } } ] Tested on DWMAC CORE 5.10a Signed-off-by: Furong Xu <0x1207@gmail.com> Reviewed-by: Vladimir Oltean Link: https://patch.msgid.link/0d21ae356fb3cab77337527e87d46748a4852055.1725631883.git.0x1207@gmail.com Signed-off-by: Jakub Kicinski

net: stmmac: support fp parameter of tc-mqprio

2024-09-10T23:42:12Z

tc-mqprio can select whether traffic classes are express or preemptible. After some traffic tests, MAC merge layer statistics are all good. Local device: ethtool --include-statistics --json --show-mm eth1 [ { "ifname": "eth1", "pmac-enabled": true, "tx-enabled": true, "tx-active": true, "tx-min-frag-size": 60, "rx-min-frag-size": 60, "verify-enabled": true, "verify-time": 100, "max-verify-time": 128, "verify-status": "SUCCEEDED", "statistics": { "MACMergeFrameAssErrorCount": 0, "MACMergeFrameSmdErrorCount": 0, "MACMergeFrameAssOkCount": 0, "MACMergeFragCountRx": 0, "MACMergeFragCountTx": 35105, "MACMergeHoldCount": 0 } } ] Remote device: ethtool --include-statistics --json --show-mm end1 [ { "ifname": "end1", "pmac-enabled": true, "tx-enabled": true, "tx-active": true, "tx-min-frag-size": 60, "rx-min-frag-size": 60, "verify-enabled": true, "verify-time": 100, "max-verify-time": 128, "verify-status": "SUCCEEDED", "statistics": { "MACMergeFrameAssErrorCount": 0, "MACMergeFrameSmdErrorCount": 0, "MACMergeFrameAssOkCount": 35105, "MACMergeFragCountRx": 35105, "MACMergeFragCountTx": 0, "MACMergeHoldCount": 0 } } ] Tested on DWMAC CORE 5.10a Signed-off-by: Furong Xu <0x1207@gmail.com> Reviewed-by: Vladimir Oltean Link: https://patch.msgid.link/592965ea93ed8240f0a1b8f6f8ebb8914f69419b.1725631883.git.0x1207@gmail.com Signed-off-by: Jakub Kicinski

net: stmmac: configure FPE via ethtool-mm

2024-09-10T23:42:12Z

Implement ethtool --show-mm and --set-mm callbacks. NIC up/down, link up/down, suspend/resume, kselftest-ethtool_mm, all tested okay. Signed-off-by: Furong Xu <0x1207@gmail.com> Reviewed-by: Vladimir Oltean Link: https://patch.msgid.link/06ed409314fe0ee37b78b800922f2c0cce762532.1725631883.git.0x1207@gmail.com Signed-off-by: Jakub Kicinski

net: stmmac: refactor FPE verification process

2024-09-10T23:42:11Z

Drop driver defined stmmac_fpe_state, and switch to common ethtool_mm_verify_status for local TX verification status. Local side and remote side verification processes are completely independent. There is no reason at all to keep a local state and a remote state. Add a spinlock to avoid races among ISR, timer, link update and register configuration. This patch is based on Vladimir Oltean's proposal. Vladimir Oltean says: ==================== In the INITIAL state, the timer sends MPACKET_VERIFY. Eventually the stmmac_fpe_event_status() IRQ fires and advances the state to VERIFYING, then rearms the timer after verify_time ms. If a subsequent IRQ comes in and modifies the state to SUCCEEDED after getting MPACKET_RESPONSE, the timer sees this. It must enable the EFPE bit now. Otherwise, it decrements the verify_limit counter and tries again. Eventually it moves the status to FAILED, from which the IRQ cannot move it anywhere else, except for another stmmac_fpe_apply() call. ==================== Co-developed-by: Vladimir Oltean Signed-off-by: Vladimir Oltean Signed-off-by: Furong Xu <0x1207@gmail.com> Reviewed-by: Vladimir Oltean Link: https://patch.msgid.link/151f86c8428eba967039718c6bf90a7d841e703b.1725631883.git.0x1207@gmail.com Signed-off-by: Jakub Kicinski

net: stmmac: drop stmmac_fpe_handshake

2024-09-10T23:42:11Z

ethtool --set-mm can trigger FPE verification process by calling stmmac_fpe_send_mpacket, stmmac_fpe_handshake should be gone. Signed-off-by: Furong Xu <0x1207@gmail.com> Reviewed-by: Vladimir Oltean Link: https://patch.msgid.link/42018b1a15eb3ced567fd6a73798c7cd4e08799a.1725631883.git.0x1207@gmail.com Signed-off-by: Jakub Kicinski

net: stmmac: move stmmac_fpe_cfg to stmmac_priv data

2024-09-10T23:42:11Z

By moving the fpe_cfg field to the stmmac_priv data, stmmac_fpe_cfg becomes platform-data eventually, instead of a run-time config. Suggested-by: Serge Semin Signed-off-by: Furong Xu <0x1207@gmail.com> Reviewed-by: Vladimir Oltean Reviewed-by: Serge Semin Link: https://patch.msgid.link/d9b3d7ecb308c5e39778a4c8ae9df288a2754379.1725631883.git.0x1207@gmail.com Signed-off-by: Jakub Kicinski

net: stmmac: Remove setting of RX software timestamp

2024-09-10T00:44:42Z

The responsibility for reporting of RX software timestamp has moved to the core layer (see __ethtool_get_ts_info()), remove usage from the device drivers. Reviewed-by: Carolina Jubran Reviewed-by: Rahul Rameshbabu Signed-off-by: Gal Pressman Link: https://patch.msgid.link/20240906144632.404651-15-gal@nvidia.com Signed-off-by: Jakub Kicinski

net: stmmac: Batch set RX OWN flag and other flags

2024-09-05T09:19:07Z

Minimize access to the RX descriptor by collecting all the flags in a local variable and then updating the descriptor at once. Signed-off-by: Tan En De Link: https://patch.msgid.link/20240831011114.2065912-1-ende.tan@starfivetech.com Signed-off-by: Paolo Abeni

net: stmmac: dwmac-sun8i: Use for_each_child_of_node_scoped()

2024-09-03T10:54:43Z

Avoid need to manually handle of_node_put() by using for_each_child_of_node_scoped(), which can simplfy code. Reviewed-by: Andrew Lunn Reviewed-by: Jonathan Cameron Signed-off-by: Jinjie Ruan Reviewed-by: Florian Fainelli Signed-off-by: Paolo Abeni