wireguard-linux/drivers/net/ethernet/stmicro, branch jd/orphan-parallel

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2020-10-06T01:40:01Z

Rejecting non-native endian BTF overlapped with the addition of support for it. The rest were more simple overlapping changes, except the renesas ravb binding update, which had to follow a file move as well as a YAML conversion. Signed-off-by: David S. Miller

net: stmmac: Modify configuration method of EEE timers

2020-10-03T23:40:25Z

Ethtool manual stated that the tx-timer is the "the amount of time the device should stay in idle mode prior to asserting its Tx LPI". The previous implementation for "ethtool --set-eee tx-timer" sets the LPI TW timer duration which is not correct. Hence, this patch fixes the "ethtool --set-eee tx-timer" to configure the EEE LPI timer. The LPI TW Timer will be using the defined default value instead of "ethtool --set-eee tx-timer" which follows the EEE LS timer implementation. Changelog V2 *Not removing/modifying the eee_timer. *EEE LPI timer can be configured through ethtool and also the eee_timer module param. *EEE TW Timer will be configured with default value only, not able to be configured through ethtool or module param. This follows the implementation of the EEE LS Timer. Fixes: d765955d2ae0 ("stmmac: add the Energy Efficient Ethernet support") Signed-off-by: Vineetha G. Jaya Kumaran Signed-off-by: Voon Weifeng Signed-off-by: David S. Miller

stmmac: intel: Adding ref clock 1us tic for LPI cntr

2020-09-29T01:43:57Z

Adding reference clock (1us tic) for all LPI timer on Intel platforms. The reference clock is derived from ptp clk. This also enables all LPI counter. Signed-off-by: Rusaimi Amira Ruslan Signed-off-by: Voon Weifeng Signed-off-by: David S. Miller

net: stmmac: Fix clock handling on remove path

2020-09-25T23:49:15Z

While unloading the dwmac-intel driver, clk_disable_unprepare() is being called twice in stmmac_dvr_remove() and intel_eth_pci_remove(). This causes kernel panic on the second call. Removing the second call of clk_disable_unprepare() in intel_eth_pci_remove(). Fixes: 09f012e64e4b ("stmmac: intel: Fix clock handling on error and remove paths") Cc: Andy Shevchenko Reviewed-by: Voon Weifeng Signed-off-by: Wong Vee Khee Reviewed-by: Andy Shevchenko Signed-off-by: David S. Miller

net: stmmac: Add option for VLAN filter fail queue enable

2020-09-25T23:48:33Z

Add option in plat_stmmacenet_data struct to enable VLAN Filter Fail Queuing. This option allows packets that fail VLAN filter to be routed to a specific Rx queue when Receive All is also set. When this option is enabled: - Enable VFFQ only when entering promiscuous mode, because Receive All will pass up all rx packets that failed address filtering (similar to promiscuous mode). - VLAN-promiscuous mode is never entered to allow rx packet to fail VLAN filters and get routed to selected VFFQ Rx queue. Reviewed-by: Voon Weifeng Reviewed-by: Ong Boon Leong Signed-off-by: Chuah, Kim Tatt Signed-off-by: Ong Boon Leong Signed-off-by: David S. Miller

drivers/net/ethernet: clean up mis-targeted comments

2020-09-25T23:29:00Z

As part of the W=1 cleanups for ethernet, a million [*] driver comments had to be cleaned up to get the W=1 compilation to succeed. This change finally makes the drivers/net/ethernet tree compile with W=1 set on the command line. NOTE: The kernel uses kdoc style (see Documentation/process/kernel-doc.rst) when documenting code, not doxygen or other styles. After this patch the x86_64 build has no warnings from W=1, however scripts/kernel-doc says there are 1545 more warnings in source files, that I need to develop a script to fix in a followup patch. The errors fixed here are all kdoc of a few classes, with a few outliers: In file included from drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c:10: drivers/net/ethernet/qlogic/netxen/netxen_nic.h:1193:18: warning: ‘FW_DUMP_LEVELS’ defined but not used [-Wunused-const-variable=] 1193 | static const u32 FW_DUMP_LEVELS[] = { 0x3, 0x7, 0xf, 0x1f, 0x3f, 0x7f, 0xff }; | ^~~~~~~~~~~~~~ ... repeats 4 times... drivers/net/ethernet/sun/cassini.c:2084:24: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body] 2084 | RX_USED_ADD(page, i); drivers/net/ethernet/natsemi/ns83820.c: In function ‘phy_intr’: drivers/net/ethernet/natsemi/ns83820.c:603:6: warning: variable ‘tbisr’ set but not used [-Wunused-but-set-variable] 603 | u32 tbisr, tanar, tanlpar; | ^~~~~ drivers/net/ethernet/natsemi/ns83820.c: In function ‘ns83820_get_link_ksettings’: drivers/net/ethernet/natsemi/ns83820.c:1207:11: warning: variable ‘tanar’ set but not used [-Wunused-but-set-variable] 1207 | u32 cfg, tanar, tbicr; | ^~~~~ drivers/net/ethernet/packetengines/yellowfin.c:1063:18: warning: variable ‘yf_size’ set but not used [-Wunused-but-set-variable] 1063 | int data_size, yf_size; | ^~~~~~~ Normal kdoc fixes: warning: Function parameter or member 'x' not described in 'y' warning: Excess function parameter 'x' description in 'y' warning: Cannot understand on line - I thought it was a doc line [*] - ok it wasn't quite a million, but it felt like it. Signed-off-by: Jesse Brandeburg Signed-off-by: David S. Miller

net: stmmac: removed enabling eee in EEE set callback

2020-09-24T01:08:06Z

EEE should be only be enabled during stmmac_mac_link_up() when the link are up and being set up properly. set_eee should only do settings configuration and disabling the eee. Without this fix, turning on EEE using ethtool will return "Operation not supported". This is due to the driver is in a dead loop waiting for eee to be advertised in the for eee to be activated but the driver will only configure the EEE advertisement after the eee is activated. Ethtool should only return "Operation not supported" if there is no EEE capbility in the MAC controller. Fixes: 8a7493e58ad6 ("net: stmmac: Fix a race in EEE enable callback") Signed-off-by: Voon Weifeng Acked-by: Mark Gross Signed-off-by: David S. Miller

net: stmmac: Add support to Ethtool get/set ring parameters

2020-09-16T22:22:52Z

This patch add support to --show-ring & --set-ring Ethtool functions: - Adding min, max, power of two check to new ring parameter's value. - Bring down the network interface before changing the value of ring parameters. - Bring up the network interface after changing the value of ring parameters. Signed-off-by: Song, Yoong Siang Signed-off-by: Voon Weifeng Signed-off-by: Ong Boon Leong Signed-off-by: David S. Miller

net: stmmac: use netif_tx_start|stop_all_queues() function

2020-09-15T22:39:57Z

The current implementation of stmmac_stop_all_queues() and stmmac_start_all_queues() will not work correctly when the value of tx_queues_to_use is changed through ethtool -L DEVNAME rx N tx M command. Also, netif_tx_start|stop_all_queues() are only needed in driver open() and close() only. Fixes: c22a3f48 net: stmmac: adding multiple napi mechanism Signed-off-by: Ong Boon Leong Signed-off-by: Voon Weifeng Signed-off-by: David S. Miller

net: stmmac: Fix incorrect location to set real_num_rx|tx_queues

2020-09-15T22:39:47Z

netif_set_real_num_tx_queues() & netif_set_real_num_rx_queues() should be used to inform network stack about the real Tx & Rx queue (active) number in both stmmac_open() and stmmac_resume(), therefore, we move the code from stmmac_dvr_probe() to stmmac_hw_setup(). Fixes: c02b7a914551 net: stmmac: use netif_set_real_num_{rx,tx}_queues Signed-off-by: Aashish Verma Signed-off-by: Ong Boon Leong Signed-off-by: David S. Miller