wireguard-linux/drivers/net/hyperv, branch update-toolchain

tracing/treewide: Remove second parameter of __assign_str()

2024-05-23T00:14:47Z

With the rework of how the __string() handles dynamic strings where it saves off the source string in field in the helper structure[1], the assignment of that value to the trace event field is stored in the helper value and does not need to be passed in again. This means that with: __string(field, mystring) Which use to be assigned with __assign_str(field, mystring), no longer needs the second parameter and it is unused. With this, __assign_str() will now only get a single parameter. There's over 700 users of __assign_str() and because coccinelle does not handle the TRACE_EVENT() macro I ended up using the following sed script: git grep -l __assign_str | while read a ; do sed -e 's/$__assign_str([^,]*[^ ,]$ *,[^;]*/\1)/' $a > /tmp/test-file; mv /tmp/test-file $a; done I then searched for __assign_str() that did not end with ';' as those were multi line assignments that the sed script above would fail to catch. Note, the same updates will need to be done for: __assign_str_len() __assign_rel_str() __assign_rel_str_len() I tested this with both an allmodconfig and an allyesconfig (build only for both). [1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/ Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home Cc: Masami Hiramatsu Cc: Mathieu Desnoyers Cc: Linus Torvalds Cc: Julia Lawall Signed-off-by: Steven Rostedt (Google) Acked-by: Jani Nikula Acked-by: Christian König for the amdgpu parts. Acked-by: Thomas Hellström #for Acked-by: Rafael J. Wysocki # for thermal Acked-by: Takashi Iwai Acked-by: Darrick J. Wong # xfs Tested-by: Guenter Roeck

net: annotate writes on dev->mtu from ndo_change_mtu()

2024-05-07T23:19:14Z

Simon reported that ndo_change_mtu() methods were never updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted in commit 501a90c94510 ("inet: protect against too small mtu values.") We read dev->mtu without holding RTNL in many places, with READ_ONCE() annotations. It is time to take care of ndo_change_mtu() methods to use corresponding WRITE_ONCE() Signed-off-by: Eric Dumazet Reported-by: Simon Horman Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/ Reviewed-by: Jacob Keller Reviewed-by: Sabrina Dubroca Reviewed-by: Simon Horman Acked-by: Shannon Nelson Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com Signed-off-by: Jakub Kicinski

hv_netvsc: Don't free decrypted memory

2024-04-10T21:33:32Z

In CoCo VMs it is possible for the untrusted host to cause set_memory_encrypted() or set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers need to take care to handle these errors to avoid returning decrypted (shared) memory to the page allocator, which could lead to functional or security issues. The netvsc driver could free decrypted/shared pages if set_memory_decrypted() fails. Check the decrypted field in the gpadl to decide whether to free the memory. Signed-off-by: Rick Edgecombe Signed-off-by: Michael Kelley Reviewed-by: Kuppuswamy Sathyanarayanan Acked-by: Kirill A. Shutemov Link: https://lore.kernel.org/r/20240311161558.1310-4-mhklinux@outlook.com Signed-off-by: Wei Liu Message-ID: <20240311161558.1310-4-mhklinux@outlook.com>

hv_netvsc: Register VF in netvsc_probe if NET_DEVICE_REGISTER missed

2024-02-04T13:38:08Z

If hv_netvsc driver is unloaded and reloaded, the NET_DEVICE_REGISTER handler cannot perform VF register successfully as the register call is received before netvsc_probe is finished. This is because we register register_netdevice_notifier() very early( even before vmbus_driver_register()). To fix this, we try to register each such matching VF( if it is visible as a netdevice) at the end of netvsc_probe. Cc: stable@vger.kernel.org Fixes: 85520856466e ("hv_netvsc: Fix race of register_netdevice_notifier and VF register") Suggested-by: Dexuan Cui Signed-off-by: Shradha Gupta Reviewed-by: Haiyang Zhang Reviewed-by: Dexuan Cui Signed-off-by: David S. Miller

hv_netvsc: Fix race condition between netvsc_probe and netvsc_remove

2024-02-01T16:33:43Z

In commit ac5047671758 ("hv_netvsc: Disable NAPI before closing the VMBus channel"), napi_disable was getting called for all channels, including all subchannels without confirming if they are enabled or not. This caused hv_netvsc getting hung at napi_disable, when netvsc_probe() has finished running but nvdev->subchan_work has not started yet. netvsc_subchan_work() -> rndis_set_subchannel() has not created the sub-channels and because of that netvsc_sc_open() is not running. netvsc_remove() calls cancel_work_sync(&nvdev->subchan_work), for which netvsc_subchan_work did not run. netif_napi_add() sets the bit NAPI_STATE_SCHED because it ensures NAPI cannot be scheduled. Then netvsc_sc_open() -> napi_enable will clear the NAPIF_STATE_SCHED bit, so it can be scheduled. napi_disable() does the opposite. Now during netvsc_device_remove(), when napi_disable is called for those subchannels, napi_disable gets stuck on infinite msleep. This fix addresses this problem by ensuring that napi_disable() is not getting called for non-enabled NAPI struct. But netif_napi_del() is still necessary for these non-enabled NAPI struct for cleanup purpose. Call trace: [ 654.559417] task:modprobe state:D stack: 0 pid: 2321 ppid: 1091 flags:0x00004002 [ 654.568030] Call Trace: [ 654.571221] [ 654.573790] __schedule+0x2d6/0x960 [ 654.577733] schedule+0x69/0xf0 [ 654.581214] schedule_timeout+0x87/0x140 [ 654.585463] ? __bpf_trace_tick_stop+0x20/0x20 [ 654.590291] msleep+0x2d/0x40 [ 654.593625] napi_disable+0x2b/0x80 [ 654.597437] netvsc_device_remove+0x8a/0x1f0 [hv_netvsc] [ 654.603935] rndis_filter_device_remove+0x194/0x1c0 [hv_netvsc] [ 654.611101] ? do_wait_intr+0xb0/0xb0 [ 654.615753] netvsc_remove+0x7c/0x120 [hv_netvsc] [ 654.621675] vmbus_remove+0x27/0x40 [hv_vmbus] Cc: stable@vger.kernel.org Fixes: ac5047671758 ("hv_netvsc: Disable NAPI before closing the VMBus channel") Signed-off-by: Souradeep Chakrabarti Reviewed-by: Dexuan Cui Reviewed-by: Haiyang Zhang Reviewed-by: Simon Horman Link: https://lore.kernel.org/r/1706686551-28510-1-git-send-email-schakrabarti@linux.microsoft.com Signed-off-by: Jakub Kicinski

hv_netvsc: Calculate correct ring size when PAGE_SIZE is not 4 Kbytes

2024-01-24T01:19:42Z

Current code in netvsc_drv_init() incorrectly assumes that PAGE_SIZE is 4 Kbytes, which is wrong on ARM64 with 16K or 64K page size. As a result, the default VMBus ring buffer size on ARM64 with 64K page size is 8 Mbytes instead of the expected 512 Kbytes. While this doesn't break anything, a typical VM with 8 vCPUs and 8 netvsc channels wastes 120 Mbytes (8 channels * 2 ring buffers/channel * 7.5 Mbytes/ring buffer). Unfortunately, the module parameter specifying the ring buffer size is in units of 4 Kbyte pages. Ideally, it should be in units that are independent of PAGE_SIZE, but backwards compatibility prevents changing that now. Fix this by having netvsc_drv_init() hardcode 4096 instead of using PAGE_SIZE when calculating the ring buffer size in bytes. Also use the VMBUS_RING_SIZE macro to ensure proper alignment when running with page size larger than 4K. Cc: # 5.15.x Fixes: 7aff79e297ee ("Drivers: hv: Enable Hyper-V code to be built on ARM64") Signed-off-by: Michael Kelley Link: https://lore.kernel.org/r/20240122162028.348885-1-mhklinux@outlook.com Signed-off-by: Jakub Kicinski

hv_netvsc: remove duplicated including of slab.h

2023-12-15T12:19:00Z

rm the second include Signed-off-by: Wang Jinchao Signed-off-by: David S. Miller

net: ethtool: pass a pointer to parameters to get/set_rxfh ethtool ops

2023-12-14T06:07:16Z

The get/set_rxfh ethtool ops currently takes the rxfh (RSS) parameters as direct function arguments. This will force us to change the API (and all drivers' functions) every time some new parameters are added. This is part 1/2 of the fix, as suggested in [1]: - First simplify the code by always providing a pointer to all params (indir, key and func); the fact that some of them may be NULL seems like a weird historic thing or a premature optimization. It will simplify the drivers if all pointers are always present. - Then make the functions take a dev pointer, and a pointer to a single struct wrapping all arguments. The set_* should also take an extack. Link: https://lore.kernel.org/netdev/20231121152906.2dd5f487@kernel.org/ [1] Suggested-by: Jakub Kicinski Suggested-by: Jacob Keller Signed-off-by: Ahmed Zaki Link: https://lore.kernel.org/r/20231213003321.605376-2-ahmed.zaki@intel.com Signed-off-by: Jakub Kicinski

net: Convert some ethtool_sprintf() to ethtool_puts()

2023-12-08T10:56:25Z

This patch converts some basic cases of ethtool_sprintf() to ethtool_puts(). The conversions are used in cases where ethtool_sprintf() was being used with just two arguments: | ethtool_sprintf(&data, buffer[i].name); or when it's used with format string: "%s" | ethtool_sprintf(&data, "%s", buffer[i].name); which both now become: | ethtool_puts(&data, buffer[i].name); Signed-off-by: Justin Stitt Reviewed-by: Wei Fang Reviewed-by: Andrew Lunn Reviewed-by: Louis Peens Signed-off-by: David S. Miller

hv_netvsc: rndis_filter needs to select NLS

2023-12-02T04:12:24Z

rndis_filter uses utf8s_to_utf16s() which is provided by setting NLS, so select NLS to fix the build error: ERROR: modpost: "utf8s_to_utf16s" [drivers/net/hyperv/hv_netvsc.ko] undefined! Fixes: 1ce09e899d28 ("hyperv: Add support for setting MAC from within guests") Signed-off-by: Randy Dunlap Cc: Haiyang Zhang Cc: K. Y. Srinivasan Cc: Wei Liu Cc: Dexuan Cui Reviewed-by: Simon Horman Tested-by: Simon Horman # build-tested Reviewed-by: Michael Kelley Link: https://lore.kernel.org/r/20231130055853.19069-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski