wireguard-linux/drivers/net/usb, branch jd/bump-compilers

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2024-09-06T03:37:20Z

Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/phy/phy_device.c 2560db6ede1a ("net: phy: Fix missing of_node_put() for leds") 1dce520abd46 ("net: phy: Use for_each_available_child_of_node_scoped()") https://lore.kernel.org/20240904115823.74333648@canb.auug.org.au Adjacent changes: drivers/net/ethernet/xilinx/xilinx_axienet.h drivers/net/ethernet/xilinx/xilinx_axienet_main.c 858430db28a5 ("net: xilinx: axienet: Fix race in axienet_stop") 76abb5d675c4 ("net: xilinx: axienet: Add statistics support") Signed-off-by: Jakub Kicinski

r8152: fix the firmware doesn't work

2024-09-04T23:34:06Z

generic_ocp_write() asks the parameter "size" must be 4 bytes align. Therefore, write the bp would fail, if the mac->bp_num is odd. Align the size to 4 for fixing it. The way may write an extra bp, but the rtl8152_is_fw_mac_ok() makes sure the value must be 0 for the bp whose index is more than mac->bp_num. That is, there is no influence for the firmware. Besides, I check the return value of generic_ocp_write() to make sure everything is correct. Fixes: e5c266a61186 ("r8152: set bp in bulk") Signed-off-by: Hayes Wang Link: https://patch.msgid.link/20240903063333.4502-1-hayeswang@realtek.com Signed-off-by: Jakub Kicinski

usbnet: modern method to get random MAC

2024-09-03T18:36:51Z

The driver generates a random MAC once on load and uses it over and over, including on two devices needing a random MAC at the same time. Jakub suggested revamping the driver to the modern API for setting a random MAC rather than fixing the old stuff. The bug is as old as the driver. Signed-off-by: Oliver Neukum Reviewed-by: Simon Horman Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://patch.msgid.link/20240829175201.670718-1-oneukum@suse.com Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2024-08-16T00:18:52Z

Cross-merge networking fixes after downstream PR. Conflicts: Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml c25504a0ba36 ("dt-bindings: net: fsl,qoriq-mc-dpmac: add missed property phys") be034ee6c33d ("dt-bindings: net: fsl,qoriq-mc-dpmac: using unevaluatedProperties") https://lore.kernel.org/20240815110934.56ae623a@canb.auug.org.au drivers/net/dsa/vitesse-vsc73xx-core.c 5b9eebc2c7a5 ("net: dsa: vsc73xx: pass value in phy_write operation") fa63c6434b6f ("net: dsa: vsc73xx: check busy flag in MDIO operations") 2524d6c28bdc ("net: dsa: vsc73xx: use defined values in phy operations") https://lore.kernel.org/20240813104039.429b9fe6@canb.auug.org.au Resolve by using FIELD_PREP(), Stephen's resolution is simpler. Adjacent changes: net/vmw_vsock/af_vsock.c 69139d2919dd ("vsock: fix recursive ->recvmsg calls") 744500d81f81 ("vsock: add support for SIOCOUTQ ioctl") Link: https://patch.msgid.link/20240815141149.33862-1-pabeni@redhat.com Signed-off-by: Jakub Kicinski

net: usb: cdc_ether: don't spew notifications

2024-08-10T05:01:01Z

The usbnet_link_change function is not called, if the link has not changed. ... [16913.807393][ 3] cdc_ether 1-2:2.0 enx00e0995fd1ac: kevent 12 may have been dropped [16913.822266][ 2] cdc_ether 1-2:2.0 enx00e0995fd1ac: kevent 12 may have been dropped [16913.826296][ 2] cdc_ether 1-2:2.0 enx00e0995fd1ac: kevent 11 may have been dropped ... kevent 11 is scheduled too frequently and may affect other event schedules. Signed-off-by: zhangxiangqian Acked-by: Oliver Neukum Link: https://patch.msgid.link/1723109985-11996-1-git-send-email-zhangxiangqian@kylinos.cn Signed-off-by: Jakub Kicinski

usbnet: ipheth: fix carrier detection in modes 1 and 4

2024-08-09T12:54:21Z

Apart from the standard "configurations", "interfaces" and "alternate interface settings" in USB, iOS devices also have a notion of "modes". In different modes, the device exposes a different set of available configurations. Depending on the iOS version, and depending on the current mode, the length and contents of the carrier state control message differs: * 1 byte (seen on iOS 4.2.1, 8.4): * 03: carrier off (mode 0) * 04: carrier on (mode 0) * 3 bytes (seen on iOS 10.3.4, 15.7.6): * 03 03 03: carrier off (mode 0) * 04 04 03: carrier on (mode 0) * 4 bytes (seen on iOS 16.5, 17.6): * 03 03 03 00: carrier off (mode 0) * 04 03 03 00: carrier off (mode 1) * 06 03 03 00: carrier off (mode 4) * 04 04 03 04: carrier on (mode 0 and 1) * 06 04 03 04: carrier on (mode 4) Before this change, the driver always used the first byte of the response to determine carrier state. From this larger sample, the first byte seems to indicate the number of available USB configurations in the current mode (with the exception of the default mode 0), and in some cases (namely mode 1 and 4) does not correlate with the carrier state. Previous logic erroneously counted `04 03 03 00` as "carrier on" and `06 04 03 04` as "carrier off" on iOS versions that support mode 1 and mode 4 respectively. Only modes 0, 1 and 4 expose the USB Ethernet interfaces necessary for the ipheth driver. Check the second byte of the control message where possible, and fall back to checking the first byte on older iOS versions. Signed-off-by: Foster Snowhill Tested-by: Georgi Valkov Signed-off-by: David S. Miller

usbnet: ipheth: do not stop RX on failing RX callback

2024-08-09T12:54:21Z

RX callbacks can fail for multiple reasons: * Payload too short * Payload formatted incorrecly (e.g. bad NCM framing) * Lack of memory None of these should cause the driver to seize up. Make such failures non-critical and continue processing further incoming URBs. Signed-off-by: Foster Snowhill Signed-off-by: David S. Miller

usbnet: ipheth: drop RX URBs with no payload

2024-08-09T12:54:20Z

On iPhone 15 Pro Max one can observe periodic URBs with no payload on the "bulk in" (RX) endpoint. These don't seem to do anything meaningful. Reproduced on iOS 17.5.1 and 17.6. This behaviour isn't observed on iPhone 11 on the same iOS version. The nature of these zero-length URBs is so far unknown. Drop RX URBs with no payload. Signed-off-by: Foster Snowhill Signed-off-by: David S. Miller

usbnet: ipheth: remove extraneous rx URB length check

2024-08-09T12:54:20Z

Rx URB length was already checked in ipheth_rcvbulk_callback_legacy() and ipheth_rcvbulk_callback_ncm(), depending on the current mode. The check in ipheth_rcvbulk_callback() was thus mostly a duplicate. The only place in ipheth_rcvbulk_callback() where we care about the URB length is for the initial control frame. These frames are always 4 bytes long. This has been checked as far back as iOS 4.2.1 on iPhone 3G. Remove the extraneous URB length check. For control frames, check for the specific 4-byte length instead. Signed-off-by: Foster Snowhill Tested-by: Georgi Valkov Signed-off-by: David S. Miller

usbnet: ipheth: race between ipheth_close and error handling

2024-08-09T12:54:20Z

ipheth_sndbulk_callback() can submit carrier_work as a part of its error handling. That means that the driver must make sure that the work is cancelled after it has made sure that no more URB can terminate with an error condition. Hence the order of actions in ipheth_close() needs to be inverted. Signed-off-by: Oliver Neukum Signed-off-by: Foster Snowhill Tested-by: Georgi Valkov Signed-off-by: David S. Miller