wireguard-linux/drivers/pci, branch update-toolchain

PCI: pciehp: Retain Power Indicator bits for userspace indicators

2024-08-01T17:58:03Z

The sysfs "attention" file normally controls the Slot Control Attention Indicator with 0 (off), 1 (on), 2 (blink) settings. 576243b3f9ea ("PCI: pciehp: Allow exclusive userspace control of indicators") added pciehp_set_raw_indicator_status() to allow userspace to directly control all four bits in both the Attention Indicator and the Power Indicator fields via the "attention" file. This is used on Intel VMD bridges so utilities like "ledmon" can use sysfs "attention" to control up to 16 indicators for NVMe device RAID status. abaaac4845a0 ("PCI: hotplug: Use FIELD_GET/PREP()") broke this by masking the sysfs data with PCI_EXP_SLTCTL_AIC, which discards the upper two bits intended for the Power Indicator Control field (PCI_EXP_SLTCTL_PIC). For NVMe devices behind an Intel VMD, ledmon settings that use the PCI_EXP_SLTCTL_PIC bits, i.e., ATTENTION_REBUILD (0x5), ATTENTION_LOCATE (0x7), ATTENTION_FAILURE (0xD), ATTENTION_OFF (0xF), no longer worked correctly. Mask with PCI_EXP_SLTCTL_AIC | PCI_EXP_SLTCTL_PIC to retain both the Attention Indicator and the Power Indicator bits. Fixes: abaaac4845a0 ("PCI: hotplug: Use FIELD_GET/PREP()") Link: https://lore.kernel.org/r/20240722141440.7210-1-blazej.kucman@intel.com Signed-off-by: Blazej Kucman [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas Cc: stable@vger.kernel.org # v6.7+

PCI: Fix devres regression in pci_intx()

2024-08-01T17:56:06Z

pci_intx() becomes managed if pcim_enable_device() has been called in advance. Commit 25216afc9db5 ("PCI: Add managed pcim_intx()") changed this behavior so that pci_intx() always leads to creation of a separate device resource for itself, whereas earlier, a shared resource was used for all PCI devres operations. Unfortunately, pci_intx() seems to be used in some drivers' remove() paths; in the managed case this causes a device resource to be created on driver detach, which causes .probe() to fail if the driver is reloaded: pci 0000:00:1f.2: Resources present before probing Fix the regression by only redirecting pci_intx() to its managed twin pcim_intx() if the pci_command changes. Link: https://lore.kernel.org/r/20240725120729.59788-2-pstanner@redhat.com Fixes: 25216afc9db5 ("PCI: Add managed pcim_intx()") Reported-by: Damien Le Moal Closes: https://lore.kernel.org/all/b8f4ba97-84fc-4b7e-ba1a-99de2d9f0118@kernel.org/ Signed-off-by: Philipp Stanner [bhelgaas: add error message to commit log] Signed-off-by: Bjorn Helgaas Tested-by: Damien Le Moal

Merge tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2024-07-25T17:42:22Z

Pull driver core updates from Greg KH: "Here is the big set of driver core changes for 6.11-rc1. Lots of stuff in here, with not a huge diffstat, but apis are evolving which required lots of files to be touched. Highlights of the changes in here are: - platform remove callback api final fixups (Uwe took many releases to get here, finally!) - Rust bindings for basic firmware apis and initial driver-core interactions. It's not all that useful for a "write a whole driver in rust" type of thing, but the firmware bindings do help out the phy rust drivers, and the driver core bindings give a solid base on which others can start their work. There is still a long way to go here before we have a multitude of rust drivers being added, but it's a great first step. - driver core const api changes. This reached across all bus types, and there are some fix-ups for some not-common bus types that linux-next and 0-day testing shook out. This work is being done to help make the rust bindings more safe, as well as the C code, moving toward the end-goal of allowing us to put driver structures into read-only memory. We aren't there yet, but are getting closer. - minor devres cleanups and fixes found by code inspection - arch_topology minor changes - other minor driver core cleanups All of these have been in linux-next for a very long time with no reported problems" * tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits) ARM: sa1100: make match function take a const pointer sysfs/cpu: Make crash_hotplug attribute world-readable dio: Have dio_bus_match() callback take a const * zorro: make match function take a const pointer driver core: module: make module_[add|remove]_driver take a const * driver core: make driver_find_device() take a const * driver core: make driver_[create|remove]_file take a const * firmware_loader: fix soundness issue in `request_internal` firmware_loader: annotate doctests as `no_run` devres: Correct code style for functions that return a pointer type devres: Initialize an uninitialized struct member devres: Fix memory leakage caused by driver API devm_free_percpu() devres: Fix devm_krealloc() wasting memory driver core: platform: Switch to use kmemdup_array() driver core: have match() callback in struct bus_type take a const * MAINTAINERS: add Rust device abstractions to DRIVER CORE device: rust: improve safety comments MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER firmware: rust: improve safety comments ...

Merge tag 'irq-msi-2024-07-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2024-07-22T21:02:19Z

Pull MSI interrupt updates from Thomas Gleixner: "Switch ARM/ARM64 over to the modern per device MSI domains. This simplifies the handling of platform MSI and wire to MSI controllers and removes about 500 lines of legacy code. Aside of that it paves the way for ARM/ARM64 to utilize the dynamic allocation of PCI/MSI interrupts and to support the upcoming non standard IMS (Interrupt Message Store) mechanism on PCIe devices" * tag 'irq-msi-2024-07-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) irqchip/gic-v3-its: Correctly fish out the DID for platform MSI irqchip/gic-v3-its: Correctly honor the RID remapping genirq/msi: Move msi_device_data to core genirq/msi: Remove platform MSI leftovers irqchip/irq-mvebu-icu: Remove platform MSI leftovers irqchip/irq-mvebu-sei: Switch to MSI parent irqchip/mvebu-odmi: Switch to parent MSI irqchip/mvebu-gicp: Switch to MSI parent irqchip/irq-mvebu-icu: Prepare for real per device MSI irqchip/imx-mu-msi: Switch to MSI parent irqchip/gic-v2m: Switch to device MSI irqchip/gic_v3_mbi: Switch over to parent domain genirq/msi: Remove platform_msi_create_device_domain() irqchip/mbigen: Remove platform_msi_create_device_domain() fallback irqchip/gic-v3-its: Switch platform MSI to MSI parent irqchip/irq-msi-lib: Prepare for DOMAIN_BUS_WIRED_TO_MSI irqchip/mbigen: Prepare for real per device MSI irqchip/irq-msi-lib: Prepare for DEVICE MSI to replace platform MSI irqchip/gic-v3-its: Provide MSI parent for PCI/MSI[-X] irqchip/irq-msi-lib: Prepare for PCI MSI/MSIX ...

Merge tag 'powerpc-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2024-07-20T04:00:33Z

Pull powerpc updates from Michael Ellerman: - Remove support for 40x CPUs & platforms - Add support to the 64-bit BPF JIT for cpu v4 instructions - Fix PCI hotplug driver crash on powernv - Fix doorbell emulation for KVM on PAPR guests (nestedv2) - Fix KVM nested guest handling of some less used SPRs - Online NUMA nodes with no CPU/memory if they have a PCI device attached - Reduce memory overhead of enabling kfence on 64-bit Radix MMU kernels - Reimplement the iommu table_group_ops for pseries for VFIO SPAPR TCE Thanks to: Anjali K, Artem Savkov, Athira Rajeev, Breno Leitao, Brian King, Celeste Liu, Christophe Leroy, Esben Haabendal, Gaurav Batra, Gautam Menghani, Haren Myneni, Hari Bathini, Jeff Johnson, Krishna Kumar, Krzysztof Kozlowski, Nathan Lynch, Nicholas Piggin, Nick Bowler, Nilay Shroff, Rob Herring (Arm), Shawn Anastasio, Shivaprasad G Bhat, Sourabh Jain, Srikar Dronamraju, Timothy Pearson, Uwe Kleine-König, and Vaibhav Jain. * tag 'powerpc-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (57 commits) Documentation/powerpc: Mention 40x is removed powerpc: Remove 40x leftovers macintosh/therm_windtunnel: fix module unload. powerpc: Check only single values are passed to CPU/MMU feature checks powerpc/xmon: Fix disassembly CPU feature checks powerpc: Drop clang workaround for builtin constant checks powerpc64/bpf: jit support for signed division and modulo powerpc64/bpf: jit support for sign extended mov powerpc64/bpf: jit support for sign extended load powerpc64/bpf: jit support for unconditional byte swap powerpc64/bpf: jit support for 32bit offset jmp instruction powerpc/pci: Hotplug driver bridge support pci/hotplug/pnv_php: Fix hotplug driver crash on Powernv powerpc/configs: Update defconfig with now user-visible CONFIG_FSL_IFC powerpc: add missing MODULE_DESCRIPTION() macros macintosh/mac_hid: add MODULE_DESCRIPTION() KVM: PPC: add missing MODULE_DESCRIPTION() macros powerpc/kexec: Use of_property_read_reg() powerpc/64s/radix/kfence: map __kfence_pool at page granularity powerpc/pseries/iommu: Define spapr_tce_table_group_ops only with CONFIG_IOMMU_API ...

Merge tag 'pci-v6.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2024-07-20T02:03:18Z

Pull pci updates from Bjorn Helgaas: "Enumeration: - Define PCIE_RESET_CONFIG_DEVICE_WAIT_MS for the generic 100ms required after reset before config access (Kevin Xie) - Define PCIE_T_RRS_READY_MS for the generic 100ms required after reset before config access (probably should be unified with PCIE_RESET_CONFIG_DEVICE_WAIT_MS) (Damien Le Moal) Resource management: - Rename find_resource() to find_resource_space() to be more descriptive (Ilpo Järvinen) - Export find_resource_space() for use by PCI core, which needs to learn whether there is available space for a bridge window (Ilpo Järvinen) - Prevent double counting of resources so window size doesn't grow on each remove/rescan cycle (Ilpo Järvinen) - Relax bridge window sizing algorithm so a device doesn't break simply because it was removed and rescanned (Ilpo Järvinen) - Evaluate the ACPI PRESERVE_BOOT_CONFIG _DSM in pci_register_host_bridge() (not acpi_pci_root_create()) so we can unify it with similar DT functionality (Vidya Sagar) - Extend use of DT "linux,pci-probe-only" property so it works per-host bridge as well as globally (Vidya Sagar) - Unify support for ACPI PRESERVE_BOOT_CONFIG _DSM and the DT "linux,pci-probe-only" property in pci_preserve_config() (Vidya Sagar) Driver binding: - Add devres infrastructure for managed request and map of partial BAR resources (Philipp Stanner) - Deprecate pcim_iomap_table() because uses like "pcim_iomap_table()[0]" have no good way to return errors (Philipp Stanner) - Add an always-managed pcim_request_region() for use instead of pci_request_region() and similar, which are sometimes managed depending on whether pcim_enable_device() has been called previously (Philipp Stanner) - Reimplement pcim_set_mwi() so it doesn't need to keep store MWI state (Philipp Stanner) - Add pcim_intx() for use instead of pci_intx(), which is sometimes managed depending on whether pcim_enable_device() has been called previously (Philipp Stanner) - Add managed pcim_iomap_range() to allow mapping of a partial BAR (Philipp Stanner) - Fix a devres mapping leak in drm/vboxvideo (Philipp Stanner) Error handling: - Add missing bridge locking in device reset path and add a warning for other possible lock issues (Dan Williams) - Fix use-after-free on concurrent DPC and hot-removal (Lukas Wunner) Power management: - Disable AER and DPC during suspend to avoid spurious wakeups if they share an interrupt with PME (Kai-Heng Feng) PCIe native device hotplug: - Detect if a device was removed or replaced during system sleep so we don't assume a new device is the one that used to be there (Lukas Wunner) Virtualization: - Add an ACS quirk for Broadcom BCM5760X multi-function NIC; it prevents transactions between functions even though it doesn't advertise ACS, so the functions can be attached individually via VFIO (Ajit Khaparde) Peer-to-peer DMA: - Add a "pci=config_acs=" kernel command-line parameter to relax default ACS settings to enable additional peer-to-peer configurations. Requires expert knowledge of topology and ACS operation (Vidya Sagar) Endpoint framework: - Remove unused struct pci_epf_group.type_group (Christophe JAILLET) - Fix error handling in vpci_scan_bus() and epf_ntb_epc_cleanup() (Dan Carpenter) - Make struct pci_epc_class constant (Greg Kroah-Hartman) - Remove unused pci_endpoint_test_bar_{readl,writel} functions (Jiapeng Chong) - Rename "BME" to "Bus Master Enable" (Manivannan Sadhasivam) - Rename struct pci_epc_event_ops.core_init() callback to epc_init() (Manivannan Sadhasivam) - Move DMA init to MHI .epc_init() callback for uniformity (Manivannan Sadhasivam) - Cancel EPF test delayed work when link goes down (Manivannan Sadhasivam) - Add struct pci_epc_event_ops.epc_deinit() callback for cleanup needed on fundamental reset (Manivannan Sadhasivam) - Add 64KB alignment to endpoint test to support Rockchip rk3588 (Niklas Cassel) - Optimize endpoint test by using memcpy() instead of readl() (Niklas Cassel) Device tree bindings: - Add generic "ats-supported" property to advertise that a PCIe Root Complex supports ATS (Jean-Philippe Brucker) Amazon Annapurna Labs PCIe controller driver: - Validate IORESOURCE_BUS presence to avoid NULL pointer dereference (Aleksandr Mishin) Axis ARTPEC-6 PCIe controller driver: - Rename .cpu_addr_fixup() parameter to reflect that it is a PCI address, not a CPU address (Niklas Cassel) Freescale i.MX6 PCIe controller driver: - Convert to agnostic GPIO API (Andy Shevchenko) Freescale Layerscape PCIe controller driver: - Make struct mobiveil_rp_ops constant (Christophe JAILLET) - Use new generic dw_pcie_ep_linkdown() to handle link-down events (Manivannan Sadhasivam) HiSilicon Kirin PCIe controller driver: - Convert to agnostic GPIO API (Andy Shevchenko) - Use _scoped() iterator for OF children to ensure refcounts are decremented at loop exit (Javier Carrasco) Intel VMD host bridge driver: - Create sysfs "domain" symlink before downstream devices are exposed to userspace by pci_bus_add_devices() (Jiwei Sun) Loongson PCIe controller driver: - Enable MSI when LS7A is used with new CPUs that have integrated PCIe Root Complex, e.g., Loongson-3C6000, so downstream devices can use MSI (Huacai Chen) Microchip AXI PolarFlare PCIe controller driver: - Move pcie-microchip-host.c to a new PLDA directory (Minda Chen) - Factor PLDA generic items out to a common plda,xpressrich3-axi-common.yaml binding (Minda Chen) - Factor PLDA generic data structures and code out to shared pcie-plda.h, pcie-plda-host.c (Minda Chen) - Add PLDA generic interrupt handling with a .request_event_irq() callback for vendor-specific events (Minda Chen) - Add PLDA generic host init/deinit and map bus functions for use by vendor-specific drivers (Minda Chen) - Rework to use PLDA core (Minda Chen) Microsoft Hyper-V host bridge driver: - Return zero, not garbage, when reading PCI_INTERRUPT_PIN (Wei Liu) NVIDIA Tegra194 PCIe controller driver: - Remove unused struct tegra_pcie_soc (Dr. David Alan Gilbert) - Set 64KB inbound ATU alignment restriction (Jon Hunter) Qualcomm PCIe controller driver: - Make the MHI reg region mandatory for X1E80100, since all PCIe controllers have it (Abel Vesa) - Prevent use of uninitialized data and possible error pointer dereference (Dan Carpenter) - Return error, not success, if dev_pm_opp_find_freq_floor() fails (Dan Carpenter) - Add Operating Performance Points (OPP) support to scale performance state based on aggregate link bandwidth to improve SoC power efficiency (Krishna chaitanya chundru) - Vote for the CPU-PCIe ICC (interconnect) path to ensure it stays active even if other drivers don't vote for it (Krishna chaitanya chundru) - Use devm_clk_bulk_get_all() to get all the clocks from DT to avoid writing out all the clock names (Manivannan Sadhasivam) - Add DT binding and driver support for the SA8775P SoC (Mrinmay Sarkar) - Add HDMA support for the SA8775P SoC (Mrinmay Sarkar) - Override the SA8775P NO_SNOOP default to avoid possible memory corruption (Mrinmay Sarkar) - Make sure resources are disabled during PERST# assertion, even if the link is already disabled (Manivannan Sadhasivam) - Use new generic dw_pcie_ep_linkdown() to handle link-down events (Manivannan Sadhasivam) - Add DT and endpoint driver support for the SA8775P SoC (Mrinmay Sarkar) - Add Hyper DMA (HDMA) support for the SA8775P SoC and enable it in the EPF MHI driver (Mrinmay Sarkar) - Set PCIE_PARF_NO_SNOOP_OVERIDE to override the default NO_SNOOP attribute on the SA8775P SoC (both Root Complex and Endpoint mode) to avoid possible memory corruption (Mrinmay Sarkar) Renesas R-Car PCIe controller driver: - Demote WARN() to dev_warn_ratelimited() in rcar_pcie_wakeup() to avoid unnecessary backtrace (Marek Vasut) - Add DT and driver support for R-Car V4H (R8A779G0) host and endpoint. This requires separate proprietary firmware (Yoshihiro Shimoda) Rockchip PCIe controller driver: - Assert PERST# for 100ms after power is stable (Damien Le Moal) - Wait PCIE_T_RRS_READY_MS (100ms) after reset before starting configuration (Damien Le Moal) - Use GPIOD_OUT_LOW flag while requesting ep_gpio to fix a firmware crash on Qcom-based modems with Rockpro64 board (Manivannan Sadhasivam) Rockchip DesignWare PCIe controller driver: - Factor common parts of rockchip-dw-pcie DT binding to be shared by Root Complex and Endpoint mode (Niklas Cassel) - Add missing INTx signals to common DT binding (Niklas Cassel) - Add eDMA items to DT binding for Endpoint controller (Niklas Cassel) - Fix initial dw-rockchip PERST# GPIO value to prevent unnecessary short assert/deassert that causes issues with some WLAN controllers (Niklas Cassel) - Refactor dw-rockchip and add support for Endpoint mode (Niklas Cassel) - Call pci_epc_init_notify() and drop dw_pcie_ep_init_notify() wrapper (Niklas Cassel) - Add error messages in .probe() error paths to improve user experience (Uwe Kleine-König) Samsung Exynos PCIe controller driver: - Use bulk clock APIs to simplify clock setup (Shradha Todi) StarFive PCIe controller driver: - Add DT binding and driver support for the StarFive JH7110 PLDA-based PCIe controller (Minda Chen) Synopsys DesignWare PCIe controller driver: - Add generic support for sending PME_Turn_Off when system suspends (Frank Li) - Fix incorrect interpretation of iATU slot 0 after PERST# assert/deassert (Frank Li) - Use msleep() instead of usleep_range() while waiting for link (Konrad Dybcio) - Refactor dw_pcie_edma_find_chip() to enable adding support for Hyper DMA (HDMA) (Manivannan Sadhasivam) - Enable drivers to supply the eDMA channel count since some can't auto detect this (Manivannan Sadhasivam) - Call pci_epc_init_notify() and drop dw_pcie_ep_init_notify() wrapper (Manivannan Sadhasivam) - Pass the eDMA mapping format directly from drivers instead of maintaining a capability for it (Manivannan Sadhasivam) - Add generic dw_pcie_ep_linkdown() to notify EPF drivers about link-down events and restore non-sticky DWC registers lost on link down (Manivannan Sadhasivam) - Add vendor-specific "apb" reg name, interrupt names, INTx names to generic binding (Niklas Cassel) - Enforce DWC restriction that 64-bit BARs must start with an even-numbered BAR (Niklas Cassel) - Consolidate args of dw_pcie_prog_outbound_atu() into a structure (Yoshihiro Shimoda) - Add support for endpoints to send Message TLPs, e.g., for INTx emulation (Yoshihiro Shimoda) TI DRA7xx PCIe controller driver: - Rename .cpu_addr_fixup() parameter to reflect that it is a PCI address, not a CPU address (Niklas Cassel) TI Keystone PCIe controller driver: - Validate IORESOURCE_BUS presence to avoid NULL pointer dereference (Aleksandr Mishin) - Work around AM65x/DRA80xM Errata #i2037 that corrupts TLPs and causes processor hangs by limiting Max_Read_Request_Size (MRRS) and Max_Payload_Size (MPS) (Kishon Vijay Abraham I) - Leave BAR 0 disabled for AM654x to fix a regression caused by 6ab15b5e7057 ("PCI: dwc: keystone: Convert .scan_bus() callback to use add_bus"), which caused a 45-second boot delay (Siddharth Vadapalli) Xilinx Versal CPM PCIe controller driver: - Fix overlapping bridge registers and 32-bit BAR addresses in DT binding (Thippeswamy Havalige) MicroSemi Switchtec management driver: - Make struct switchtec_class constant (Greg Kroah-Hartman) Miscellaneous: - Remove unused struct acpi_handle_node (Dr. David Alan Gilbert) - Add missing MODULE_DESCRIPTION() macros (Jeff Johnson)" * tag 'pci-v6.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (154 commits) PCI: loongson: Enable MSI in LS7A Root Complex PCI: Extend ACS configurability PCI: Add missing bridge lock to pci_bus_lock() drm/vboxvideo: fix mapping leaks PCI: Add managed pcim_iomap_range() PCI: Remove legacy pcim_release() PCI: Add managed pcim_intx() PCI: vmd: Create domain symlink before pci_bus_add_devices() PCI: qcom: Prevent use of uninitialized data in qcom_pcie_suspend_noirq() PCI: qcom: Prevent potential error pointer dereference PCI: qcom: Fix missing error code in qcom_pcie_probe() PCI: Give pcim_set_mwi() its own devres cleanup callback PCI: Move struct pci_devres.pinned bit to struct pci_dev PCI: Remove struct pci_devres.enabled status bit PCI: Document hybrid devres hazards PCI: Add managed pcim_request_region() PCI: Deprecate pcim_iomap_table(), pcim_iomap_regions_request_all() PCI: Add managed partial-BAR request and map infrastructure PCI: Add devres helpers for iomap table PCI: Add and use devres helper for bit masks ...

Merge tag 'pwrseq-fixes-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

2024-07-19T21:31:18Z

Pull power sequencing fixes from Bartosz Golaszewski: "There's one fix for an invalid pointer dereference in error path reported by smatch and two patches that address the noisy config choices you reported earlier this week. Summary: - fix an invalid pointer dereference in error path in pwrseq core - reduce the Kconfig noise from PCI pwrctl choices" * tag 'pwrseq-fixes-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: arm64: qcom: don't select HAVE_PWRCTL when PCI=n Kconfig: reduce the amount of power sequencing noise power: sequencing: fix an invalid pointer dereference in error path

Merge branch 'pci/misc'

2024-07-19T15:10:33Z

- Remove unused struct 'acpi_handle_node' (Dr. David Alan Gilbert) - Use array notation for portdrv .id_table consistently (Masahiro Yamada) - Switch to new Intel CPU model defines (Tony Luck) - Add missing MODULE_DESCRIPTION() macros (Jeff Johnson) * pci/misc: PCI: controller: Add missing MODULE_DESCRIPTION() macros PCI: Add missing MODULE_DESCRIPTION() macros PCI/PM: Switch to new Intel CPU model defines PCI: Use array for .id_table consistently ACPI: PCI: Remove unused struct 'acpi_handle_node'

Merge branch 'pci/switchtec'

2024-07-19T15:10:33Z

- Make switchtec_class constant (Greg Kroah-Hartman) * pci/switchtec: PCI: switchtec: Make switchtec_class constant

Merge branch 'pci/controller/vmd'

2024-07-19T15:10:32Z

- Create "domain" symlink for vmd before adding devices below the VMD bridge so it's available when mdadm assembles RAID devices from them (Jiwei Sun) * pci/controller/vmd: PCI: vmd: Create domain symlink before pci_bus_add_devices()