wireguard-linux/drivers/phy/marvell/Kconfig, branch jd/unified-crypt-queue

phy: Enable compile testing for some of drivers

2020-01-06T09:35:00Z

Some of the phy drivers can be compile tested to increase build coverage. Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20200103164710.4829-2-krzk@kernel.org Signed-off-by: Greg Kroah-Hartman

phy: Add USB2 PHY driver for Marvell MMP3 SoC

2019-10-17T14:43:04Z

Add PHY driver for the USB2 PHY found on Marvell MMP3 SoC. Signed-off-by: Lubomir Rintel Acked-by: Kishon Vijay Abraham I

phy: mvebu-cp110-comphy: Add SMC call support

2019-08-27T06:07:09Z

Keep the exact same list of supported configurations but first try to use the firmware's implementation. If it fails, try the legacy method: Linux implementation. Signed-off-by: Grzegorz Jaszczyk [miquel.raynal@bootlin.com: adapt the content to the mainline driver] Signed-off-by: Miquel Raynal Tested-by: Maxime Chevallier Tested-by: Grzegorz Jaszczyk Signed-off-by: Kishon Vijay Abraham I

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46Z

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2019-03-07T00:48:27Z

Pull USB/PHY updates from Greg KH: "Here is the big USB/PHY driver pull request for 5.1-rc1. The usual set of gadget driver updates, phy driver updates, xhci updates, and typec additions. Also included in here are a lot of small cleanups and fixes and driver updates where needed. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits) wusb: Remove unnecessary static function ckhdid_printf usb: core: make default autosuspend delay configurable usb: core: Fix typo in description of "authorized_default" usb: chipidea: Refactor USB PHY selection and keep a single PHY usb: chipidea: Grab the (legacy) USB PHY by phandle first usb: chipidea: imx: set power polarity dt-bindings: usb: ci-hdrc-usb2: add property power-active-high usb: chipidea: imx: remove unused header files usb: chipidea: tegra: Fix missed ci_hdrc_remove_device() usb: core: add option of only authorizing internal devices usb: typec: tps6598x: handle block writes separately with plain-I2C adapters usb: xhci: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCI usb: xhci: fix build warning - missing prototype usb: xhci: dbc: Fixing typo error. usb: xhci: remove unused member 'parent' in xhci_regset struct xhci: tegra: Prevent error pointer dereference USB: serial: option: add Telit ME910 ECM composition usb: core: Replace hardcoded check with inline function from usb.h usb: core: skip interfaces disabled in devicetree usb: typec: mux: remove redundant check on variable match ...

phy: armada38x: add common phy support

2019-02-08T02:10:25Z

Add support for the Armada 38x common phy to allow us to change the speed of the Ethernet serdes lane. This driver only supports manipulation of the speed, it does not support configuration of the common phy. Signed-off-by: Russell King Signed-off-by: David S. Miller

phy: add A3700 UTMI PHY driver

2019-02-07T05:41:03Z

Marvell Armada 3700 SoC has two USB controllers, each of them being wired to an internal UTMI PHY. Add a driver to control them. Igal Liberman worked on supporting the PHY, I took the while 'register configuration' from his work and rewrote almost entirely the driver/bindings around it. Co-developed-by: Igal Liberman Signed-off-by: Miquel Raynal Signed-off-by: Igal Liberman Signed-off-by: Kishon Vijay Abraham I

phy: add A3700 COMPHY support

2019-02-07T05:41:01Z

Add a driver to support COMPHY, a hardware block providing shared serdes PHYs on Marvell Armada 3700. This driver uses SMC calls and rely on having an up-to-date firmware. SATA, PCie and USB3 host mode have been tested successfully with an ESPRESSObin. (HS)SGMII mode cannot be tested with this platform. Evan worked on the original driver structure and Grzegorz on the SMC calls rework. The structure of this driver has been copied from Antoine Tenart work on CP110 COMPHY driver. Signed-off-by: Miquel Raynal Co-developed-by: Evan Wang Signed-off-by: Evan Wang Co-developed-by: Grzegorz Jaszczyk Signed-off-by: Grzegorz Jaszczyk Signed-off-by: Kishon Vijay Abraham I

phy: phy-pxa-usb: add a new driver

2018-10-18T17:44:39Z

Turned from arch/arm/mach-mmp/devices.c into a proper PHY driver, so that in can be instantiated from a DT. Acked-by: Kishon Vijay Abraham I Signed-off-by: Lubomir Rintel Signed-off-by: Greg Kroah-Hartman

phy: add the mvebu cp110 comphy driver

2017-08-30T22:17:45Z

On the CP110 unit, which can be found on various Marvell platforms such as the 7k and 8k (currently), a comphy (common PHYs) hardware block can be found. This block provides a number of PHYs which can be used in various modes by other controllers (network, SATA ...). These common PHYs must be configured for the controllers using them to work correctly either at boot time, or when the system runs to switch the mode used. This patch adds a driver for this comphy hardware block, providing callbacks for the its PHYs so that consumers can configure the modes used. As of this commit, two modes are supported by the comphy driver: sgmii and 10gkr. Signed-off-by: Antoine Tenart Acked-by: Kishon Vijay Abraham I Signed-off-by: David S. Miller