wireguard-linux/drivers/phy/motorola, branch jd/unified-crypt-queue

phy: mapphone-mdm6600: Fix timeouts by adding wake-up handling

2020-02-27T04:50:40Z

We have an interrupt handler for the wake-up GPIO pin, but we're missing the code to wake-up the system. This can cause timeouts receiving data for the UART that shares the wake-up GPIO pin with the USB PHY. All we need to do is just wake the system and kick the autosuspend timeout to fix the issue. Fixes: 5d1ebbda0318 ("phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4") Cc: Marcel Partap Cc: Merlijn Wajer Cc: Michael Scott Cc: NeKit Cc: Pavel Machek Cc: Sebastian Reichel Signed-off-by: Tony Lindgren Signed-off-by: Kishon Vijay Abraham I

phy: mapphone-mdm6600: Fix write timeouts with shorter GPIO toggle interval

2020-02-19T10:32:01Z

I've noticed that when writing data to the modem the writes can time out at some point eventually. Looks like kicking the modem idle GPIO every 600 ms instead of once a second fixes the issue. Note that this rate is different from our runtime PM autosuspend rate MDM6600_MODEM_IDLE_DELAY_MS that we still want to keep at 1 second, so let's add a separate define for PHY_MDM6600_IDLE_KICK_MS. Fixes: f7f50b2a7b05 ("phy: mapphone-mdm6600: Add runtime PM support for n_gsm on USB suspend") Cc: Marcel Partap Cc: Merlijn Wajer Cc: Michael Scott Cc: NeKit Cc: Pavel Machek Cc: Sebastian Reichel Signed-off-by: Tony Lindgren Signed-off-by: Kishon Vijay Abraham I

phy: cpcap-usb: Drop extra write to usb2 register

2019-12-26T10:57:53Z

We are currently writing the same register twice. Let's enable the USB PHY only at the end of the function. Cc: Merlijn Wajer Cc: Pavel Machek Cc: Sebastian Reichel Acked-by: Pavel Machek Signed-off-by: Tony Lindgren Signed-off-by: Kishon Vijay Abraham I

phy: cpcap-usb: Improve host vs docked mode detection

2019-12-26T10:57:53Z

When docked to a Motorola lapdock or media dock, we're in USB A-host mode with VBUS provided by the dock. When in regular USB A-host mode, we're providing the VBUS. And in regular USB A-host mode we must also keep kicking the VBUS to keep it active. Let's wait a bit before configuring the USB PHY to allow some time between the ID and VBUS changes. And let's add vbus_provider flag so we can detect docked mode and regularo USB A-host mode better. With better USB A-host mode detection, we can now also just kick the VBUS to keep it enabled and leave out the unnecessary line muxing. We only need to set and clear vbus_provider in the delayed work so no locking is needed for it currently. Cc: Merlijn Wajer Cc: Pavel Machek Cc: Sebastian Reichel Acked-by: Pavel Machek Signed-off-by: Tony Lindgren Signed-off-by: Kishon Vijay Abraham I

phy: cpcap-usb: Prevent USB line glitches from waking up modem

2019-12-26T10:57:53Z

The micro-USB connector on Motorola Mapphone devices can be muxed between the SoC and the mdm6600 modem. But even when used for the SoC, configuring the PHY with ID pin grounded will wake up the modem from idle state. Looks like the issue is probably caused by line glitches. We can prevent the glitches by using a previously unknown mode of the GPIO mux to prevent the USB lines from being connected to the moden while configuring the USB PHY, and enable the USB lines after configuring the PHY. Note that this only prevents waking up mdm6600 as regular USB A-host mode, and does not help when connected to a lapdock. The lapdock specific issue still needs to be debugged separately. Cc: Merlijn Wajer Cc: Pavel Machek Cc: Sebastian Reichel Acked-by: Pavel Machek Signed-off-by: Tony Lindgren Signed-off-by: Kishon Vijay Abraham I

phy: mapphone-mdm6600: Fix uninitialized status value regression

2019-12-26T10:57:53Z

Only the used bits get cleared with bitmap_zero() when we call gpiod_get_array_value_cansleep(). We must mask only the bits we're using for ddata->status as the other bits in the bitmap may not be initialized. And let's also drop useless debug code accidentally left over while at it. Fixes: b9762bebc633 ("gpiolib: Pass bitmaps, not integer arrays, to get/set array") Cc: Jacopo Mondi Cc: Janusz Krzysztofik Cc: Linus Walleij Cc: Marcel Partap Cc: Merlijn Wajer Cc: Michael Scott Cc: NeKit Cc: Pavel Machek Cc: Sebastian Reichel Signed-off-by: Tony Lindgren Signed-off-by: Kishon Vijay Abraham I

phy: cpcap-usb: Fix flakey host idling and enumerating of devices

2019-12-26T10:57:53Z

We must let the USB host idle things properly before we switch to debug UART mode. Otherwise the USB host may never idle after disconnecting devices, and that causes the next enumeration to be flakey. Cc: Jacopo Mondi Cc: Marcel Partap Cc: Merlijn Wajer Cc: Michael Scott Cc: NeKit Cc: Pavel Machek Cc: Sebastian Reichel Acked-by: Pavel Machek Fixes: 6d6ce40f63af ("phy: cpcap-usb: Add CPCAP PMIC USB support") Signed-off-by: Tony Lindgren Signed-off-by: Kishon Vijay Abraham I

phy: cpcap-usb: Fix error path when no host driver is loaded

2019-12-20T11:29:28Z

If musb_mailbox() returns an error, we must still continue to finish configuring the phy. Otherwise the phy state may end up only half initialized, and this can cause the debug serial console to stop working. And this will happen if the usb driver musb controller is not loaded. Let's fix the issue by adding helper for cpcap_usb_try_musb_mailbox(). Fixes: 6d6ce40f63af ("phy: cpcap-usb: Add CPCAP PMIC USB support") Cc: Merlijn Wajer Cc: Pavel Machek Cc: Sebastian Reichel Signed-off-by: Tony Lindgren Signed-off-by: Kishon Vijay Abraham I

power: supply: cpcap-charger: Enable vbus boost voltage

2019-09-02T21:08:07Z

We are currently not enabling VBUS boost for cpcap when in host mode. This means the VBUS is fed at the battery voltage level, which can cause flakeyness enumerating devices. Looks like the boost control for VBUS is CPCAP_BIT_VBUS_SWITCH that we must enable in the charger for nice 4.92 V VBUS output. And looks like we must not use the STBY pin enabling but must instead use manual VBUS control in phy-cpcap-usb. We want to do this in cpcap_charger_vbus_work() and also set a flag for feeding_vbus to avoid races between USB detection and charger detection, and disable charging if feeding_vbus is set. Cc: Jacopo Mondi Cc: Kishon Vijay Abraham I Cc: Marcel Partap Cc: Merlijn Wajer Cc: Michael Scott Cc: NeKit Cc: Pavel Machek Cc: Sebastian Reichel Signed-off-by: Tony Lindgren Signed-off-by: Sebastian Reichel

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46Z

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman