wireguard-linux/drivers/phy/ti/Kconfig, branch stable

phy: ti: add PHY driver for TI DS125DF111 Dual-Channel Retimer

2026-05-19T10:35:03Z

Add a generic PHY driver for the TI DS125DF111 Multi-Protocol Dual-Channel Retimer. The driver currently supports only 10G and 1G link speeds but it can easily extended to also cover other usecases. Since the available datasheet (https://www.ti.com/lit/gpn/DS125DF111) does not name the registers, the name for the macros were determined by their usage pattern. A PHY device is created for each of the two channels present on the retimer. This allows for independent configuration of the two channels. This capability is especially important on retimers which have more than 2 channels that can be, depending on the board design, connected in multiple different ways to the SerDes lanes. Signed-off-by: Ioana Ciornei Reviewed-by: Vladimir Oltean Link: https://patch.msgid.link/20260518142026.3098496-4-ioana.ciornei@nxp.com Signed-off-by: Vinod Koul

phy: ti: alphabetically sort Kconfig and Makefile

2026-05-19T10:35:03Z

Sort alphabetically the entries in the Kconfig and Makefile files. Signed-off-by: Ioana Ciornei Link: https://patch.msgid.link/20260518142026.3098496-3-ioana.ciornei@nxp.com Signed-off-by: Vinod Koul

phy: ti: omap-usb2: enable compile testing

2025-08-13T06:49:24Z

Nothing seems to prevent the driver from being built on non-TI platforms so enable compile testing for wider build coverage. Signed-off-by: Johan Hovold Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20250724131623.2662-1-johan@kernel.org Signed-off-by: Vinod Koul

phy: ti: fix Kconfig warning and operator precedence

2023-01-11T07:54:33Z

Fix Kconfig depends operator precedence to prevent a Kconfig warning: WARNING: unmet direct dependencies detected for MUX_MMIO Depends on [n]: MULTIPLEXER [=m] && OF [=n] Selected by [m]: - PHY_AM654_SERDES [=m] && (OF [=n] && ARCH_K3 || COMPILE_TEST [=y]) && COMMON_CLK [=y] Fixes: 71e2f5c5c224 ("phy: ti: Add a new SERDES driver for TI's AM654x SoC") Fixes: 091876cc355d ("phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC") Signed-off-by: Randy Dunlap Cc: Vinod Koul Cc: Kishon Vijay Abraham I Cc: linux-phy@lists.infradead.org Cc: Arnd Bergmann Link: https://lore.kernel.org/r/20230110062529.22668-1-rdunlap@infradead.org Signed-off-by: Vinod Koul

phy: ti: gmii-sel: simplify config dependencies between net drivers and gmii phy

2020-03-27T03:01:13Z

The phy-gmii-sel can be only auto selected in Kconfig and now the pretty complex Kconfig dependencies are defined for phy-gmii-sel driver, which also need to be updated every time phy-gmii-sel is re-used for any new networking driver. Simplify Kconfig definition for phy-gmii-sel PHY driver - drop all dependencies and from networking drivers and rely on using 'imply PHY_TI_GMII_SEL' in Kconfig definitions for networking drivers instead. Signed-off-by: Grygorii Strashko Acked-by: Kishon Vijay Abraham I Tested-by: Murali Karicheri Tested-by: Peter Ujfalusi Signed-off-by: David S. Miller

phy: ti: j721e-wiz: Fix build error without CONFIG_OF_ADDRESS

2020-01-17T23:05:30Z

If CONFIG_OF_ADDRESS is not set and COMPILE_TEST=y, the following error is seen while building phy-j721e-wiz.c drivers/phy/ti/phy-j721e-wiz.o: In function `wiz_remove': phy-j721e-wiz.c:(.text+0x1a): undefined reference to `of_platform_device_destroy' Fix the config dependency for PHY_J721E_WIZ here. Reported-by: Hulk Robot Fixes: 091876cc355d ("phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC") Signed-off-by: Hongbo Yao Signed-off-by: Kishon Vijay Abraham I Link: https://lore.kernel.org/r/20200117212310.2864-1-kishon@ti.com Signed-off-by: Greg Kroah-Hartman

phy: Enable compile testing for some of drivers

2020-01-14T05:20:19Z

Some of the phy drivers can be compile tested to increase build coverage. Signed-off-by: Krzysztof Kozlowski Acked-by: Florian Fainelli Signed-off-by: Kishon Vijay Abraham I

phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC

2020-01-14T05:20:19Z

Add support for WIZ module present in TI's J721E SoC. WIZ is a SERDES wrapper used to configure some of the input signals to the SERDES. It is used with both Sierra(16G) and Torrent(10G) SERDES. This driver configures three clock selects (pll0, pll1, dig), two divider clocks and supports resets for each of the lanes. [jsarha@ti.com: Add support for Torrent(10G) SERDES wrapper] Signed-off-by: Jyri Sarha Signed-off-by: Kishon Vijay Abraham I

phy: ti: phy-gmii-sel: dependency from ti cpsw-switchdev driver

2019-11-20T19:25:24Z

Add dependency from TI_CPSW_SWITCHDEV. Signed-off-by: Grygorii Strashko Signed-off-by: David S. Miller

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46Z

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman