wireguard-linux/drivers/s390/cio, branch jd/unified-crypt-queue

s390/cio: generate delayed uevent for vfio-ccw subchannels

2020-04-06T12:02:28Z

The common I/O layer delays the ADD uevent for subchannels and delegates generating this uevent to the individual subchannel drivers. The vfio-ccw I/O subchannel driver, however, did not do that, and will not generate an ADD uevent for subchannels that had not been bound to a different driver (or none at all, which also triggers the uevent). Generate the ADD uevent at the end of the probe function if uevents were still suppressed for the device. Message-Id: <20200327124503.9794-3-cohuck@redhat.com> Fixes: 63f1934d562d ("vfio: ccw: basic implementation for vfio_ccw driver") Reviewed-by: Eric Farman Signed-off-by: Cornelia Huck Signed-off-by: Vasily Gorbik

s390/cio: avoid duplicated 'ADD' uevents

2020-04-06T12:02:28Z

The common I/O layer delays the ADD uevent for subchannels and delegates generating this uevent to the individual subchannel drivers. The io_subchannel driver will do so when the associated ccw_device has been registered -- but unconditionally, so more ADD uevents will be generated if a subchannel has been unbound from the io_subchannel driver and later rebound. To fix this, only generate the ADD event if uevents were still suppressed for the device. Fixes: fa1a8c23eb7d ("s390: cio: Delay uevents for subchannels") Message-Id: <20200327124503.9794-2-cohuck@redhat.com> Reported-by: Boris Fiuczynski Reviewed-by: Peter Oberparleiter Reviewed-by: Boris Fiuczynski Signed-off-by: Cornelia Huck Signed-off-by: Vasily Gorbik

s390/qdio: clear DSCI early for polling drivers

2020-04-06T11:13:51Z

Polling drivers in a configuration with 1 Input Queue currently keep their DSCI armed all the way through the poll cycle, until qdio_start_irq() clears it. _Any_ intermittent QDIO interrupt delivered to tiqdio_thinint_handler() will thus cause 1) the 'adapter_int' statistic to be incremented, 2) a call to tiqdio_call_inq_handlers() for this device, and then 3) the 'int_discarded' statistics to be incremented. This causes overhead & complexity in the IRQ path, along with ambiguity in the statistics. On the other hand the device should be in IRQ avoidance mode during a poll cycle, so there won't be a lot of DSCI ping-pong that this micro-optimization could prevent. So align the DSCI handling with what we already do for devices with multiple Input Queues: clear it right away while processing the IRQ. For the non-polling path this means that we no longer need to handle the 1-queue case separately. Signed-off-by: Julian Wiedmann Reviewed-by: Benjamin Block Signed-off-by: Vasily Gorbik

s390/qdio: inline shared_ind()

2020-04-06T11:13:50Z

This is just prep work for a subsequent patch, no functional change. For the non-polling path we can pull the code chunk in front of the for-loop, since it only evaluates to true for a 1-queue configuration. Signed-off-by: Julian Wiedmann Reviewed-by: Benjamin Block Signed-off-by: Vasily Gorbik

s390/qdio: remove cdev from init_data

2020-04-06T11:13:50Z

It's no longer needed. Signed-off-by: Julian Wiedmann Reviewed-by: Benjamin Block Signed-off-by: Vasily Gorbik

s390/qdio: allow for non-contiguous SBAL array in init_data

2020-04-06T11:13:50Z

Upper-layer drivers allocate their SBALs by calling qdio_alloc_buffers() for each individual queue. But when later passing the SBAL addresses to qdio_establish(), they need to be in a single array of pointers. So if the driver uses multiple Input or Output queues, it needs to allocate a temporary array just to present all its SBAL pointers in this layout. This patch slightly changes the format of the QDIO initialization data, so that drivers can pass a per-queue array where each element points to a queue's SBAL array. zfcp doesn't use multiple queues, so the impact there is trivial. For qeth this brings a nice reduction in complexity, and removes a page-sized allocation. Signed-off-by: Julian Wiedmann Reviewed-by: Benjamin Block Signed-off-by: Vasily Gorbik

s390/qdio: cleanly split alloc and establish

2020-04-06T11:13:50Z

All that qdio_allocate() actually uses from the init_data is the cdev, and the number of Input and Output Queues. Have the driver pass those as parameters, and defer the init_data processing into qdio_establish(). This includes writing per-device(!) trace entries, and most of the sanity checks. Signed-off-by: Julian Wiedmann Reviewed-by: Benjamin Block Signed-off-by: Vasily Gorbik

Merge tag 's390-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2020-04-04T16:45:50Z

Pull s390 updates from Vasily Gorbik: - Update maintainers. Niklas Schnelle takes over zpci and Vineeth Vijayan common io code. - Extend cpuinfo to include topology information. - Add new extended counters for IBM z15 and sampling buffer allocation rework in perf code. - Add control over zeroing out memory during system restart. - CCA protected key block version 2 support and other fixes/improvements in crypto code. - Convert to new fallthrough; annotations. - Replace zero-length arrays with flexible-arrays. - QDIO debugfs and other small improvements. - Drop 2-level paging support optimization for compat tasks. Varios mm cleanups. - Remove broken and unused hibernate / power management support. - Remove fake numa support which does not bring any benefits. - Exclude offline CPUs from CPU topology masks to be more consistent with other architectures. - Prevent last branching instruction address leaking to userspace. - Other small various fixes and improvements all over the code. * tag 's390-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (57 commits) s390/mm: cleanup init_new_context() callback s390/mm: cleanup virtual memory constants usage s390/mm: remove page table downgrade support s390/qdio: set qdio_irq->cdev at allocation time s390/qdio: remove unused function declarations s390/ccwgroup: remove pm support s390/ap: remove power management code from ap bus and drivers s390/zcrypt: use kvmalloc instead of kmalloc for 256k alloc s390/mm: cleanup arch_get_unmapped_area() and friends s390/ism: remove pm support s390/cio: use fallthrough; s390/vfio: use fallthrough; s390/zcrypt: use fallthrough; s390: use fallthrough; s390/cpum_sf: Fix wrong page count in error message s390/diag: fix display of diagnose call statistics s390/ap: Remove ap device suspend and resume callbacks s390/pci: Improve handling of unset UID s390/pci: Fix zpci_alloc_domain() over allocation s390/qdio: pass ISC as parameter to chsc_sadc() ...

s390/qdio: set qdio_irq->cdev at allocation time

2020-03-27T09:22:48Z

Set up qdio_irq->cdev right when the qdio_irq struct is allocated, so that all subsequent code can rely on this pointer. Then convert two helper functions to not pass a cdev parameter around. Signed-off-by: Julian Wiedmann Reviewed-by: Benjamin Block Signed-off-by: Vasily Gorbik

s390/qdio: remove unused function declarations

2020-03-27T09:22:47Z

commit 50f769df1c4b ("[S390] qdio: improve inbound buffer acknowledgement") introduced these declarations, but noone added the actual code for them. Signed-off-by: Julian Wiedmann Reviewed-by: Benjamin Block Signed-off-by: Vasily Gorbik