wireguard-linux/drivers/s390/crypto, branch jd/orphan-parallel

Merge tag 's390-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2020-10-16T19:36:38Z

Pull s390 updates from Vasily Gorbik: - Remove address space overrides using set_fs() - Convert to generic vDSO - Convert to generic page table dumper - Add ARCH_HAS_DEBUG_WX support - Add leap seconds handling support - Add NVMe firmware-assisted kernel dump support - Extend NVMe boot support with memory clearing control and addition of kernel parameters - AP bus and zcrypt api code rework. Add adapter configure/deconfigure interface. Extend debug features. Add failure injection support - Add ECC secure private keys support - Add KASan support for running protected virtualization host with 4-level paging - Utilize destroy page ultravisor call to speed up secure guests shutdown - Implement ioremap_wc() and ioremap_prot() with MIO in PCI code - Various checksum improvements - Other small various fixes and improvements all over the code * tag 's390-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (85 commits) s390/uaccess: fix indentation s390/uaccess: add default cases for __put_user_fn()/__get_user_fn() s390/zcrypt: fix wrong format specifications s390/kprobes: move insn_page to text segment s390/sie: fix typo in SIGP code description s390/lib: fix kernel doc for memcmp() s390/zcrypt: Introduce Failure Injection feature s390/zcrypt: move ap_msg param one level up the call chain s390/ap/zcrypt: revisit ap and zcrypt error handling s390/ap: Support AP card SCLP config and deconfig operations s390/sclp: Add support for SCLP AP adapter config/deconfig s390/ap: add card/queue deconfig state s390/ap: add error response code field for ap queue devices s390/ap: split ap queue state machine state from device state s390/zcrypt: New config switch CONFIG_ZCRYPT_DEBUG s390/zcrypt: introduce msg tracking in zcrypt functions s390/startup: correct early pgm check info formatting s390: remove orphaned extern variables declarations s390/kasan: make sure int handler always run with DAT on s390/ipl: add support to control memory clearing for nvme re-IPL ...

s390/zcrypt: fix wrong format specifications

2020-10-09T21:45:30Z

Fixes 5 wrong format specification findings found by the kernel test robot in ap_queue.c: warning: format specifies type 'unsigned char' but the argument has type 'int' [-Wformat] __func__, status.response_code, Signed-off-by: Harald Freudenberger Reported-by: kernel test robot Fixes: 2ea2a6099ae3 ("s390/ap: add error response code field for ap queue devices") Signed-off-by: Vasily Gorbik

s390/zcrypt: Introduce Failure Injection feature

2020-10-07T19:50:01Z

Introduce a way to specify additional debug flags with an crpyto request to be able to trigger certain failures within the zcrypt device drivers and/or ap core code. This failure injection possibility is only enabled with a kernel debug build CONFIG_ZCRYPT_DEBUG) and should never be available on a regular kernel running in production environment. Details: * The ioctl(ICARSAMODEXPO) get's a struct ica_rsa_modexpo. If the leftmost bit of the 32 bit unsigned int inputdatalength field is set, the uppermost 16 bits are separated and used as debug flag value. The process is checked to have the CAP_SYS_ADMIN capability enabled or EPERM is returned. * The ioctl(ICARSACRT) get's a struct ica_rsa_modexpo_crt. If the leftmost bit of the 32 bit unsigned int inputdatalength field is set, the uppermost 16 bits are separated and used als debug flag value. The process is checked to have the CAP_SYS_ADMIN capability enabled or EPERM is returned. * The ioctl(ZSECSENDCPRB) used to send CCA CPRBs get's a struct ica_xcRB. If the leftmost bit of the 32 bit unsigned int status field is set, the uppermost 16 bits of this field are used as debug flag value. The process is checked to have the CAP_SYS_ADMIN capability enabled or EPERM is returned. * The ioctl(ZSENDEP11CPRB) used to send EP11 CPRBs get's a struct ep11_urb. If the leftmost bit of the 64 bit unsigned int req_len field is set, the uppermost 16 bits of this field are used as debug flag value. The process is checked to have the CAP_SYS_ADMIN capability enabled or EPERM is returned. So it is possible to send an additional 16 bit value to the zcrypt API to be used to carry a failure injection command which may trigger special behavior within the zcrypt API and layers below. This 16 bit value is for the rest of the test referred as 'fi command' for Failure Injection. The lower 8 bits of the fi command construct a numerical argument in the range of 1-255 and is the 'fi action' to be performed with the request or the resulting reply: * 0x00 (all requests): No failure injection action but flags may be provided which may affect the processing of the request or reply. * 0x01 (only CCA CPRBs): The CPRB's agent_ID field is set to 'FF'. This results in an reply code 0x90 (Transport-Protocol Failure). * 0x02 (only CCA CPRBs): After the APQN to send to has been chosen, the domain field within the CPRB is overwritten with value 99 to enforce an reply with RY 0x8A. * 0x03 (all requests): At NQAP invocation the invalid qid value 0xFF00 is used causing an response code of 0x01 (AP queue not valid). The upper 8 bits of the fi command may carry bit flags which may influence the processing of an request or response: * 0x01: No retry. If this bit is set, the usual loop in the zcrypt API which retries an CPRB up to 10 times when the lower layers return with EAGAIN is abandoned after the first attempt to send the CPRB. * 0x02: Toggle special. Toggles the special bit on this request. This should result in an reply code RY~0x41 and result in an ioctl failure with errno EINVAL. This failure injection possibilities may get some further extensions in the future. As of now this is a starting point for Continuous Test and Integration to trigger some failures and watch for the reaction of the ap bus and zcrypt device driver code. Signed-off-by: Harald Freudenberger Signed-off-by: Vasily Gorbik

s390/zcrypt: move ap_msg param one level up the call chain

2020-10-07T19:50:01Z

Move the creating and disposal of the struct ap_message one level up the call chain. The ap message was constructed in the calling functions in msgtype50 and msgtype6 but only for the ica rsa messages. For CCA and EP11 CPRBs the ap message struct is created in the zcrypt api functions. This patch moves the construction of the ap message struct into the functions zcrypt_rsa_modexpo and zcrypt_rsa_crt. So now all the 4 zcrypt api functions zcrypt_rsa_modexpo, zcrypt_rsa_crt, zcrypt_send_cprb and zcrypt_send_ep11_cprb appear and act similar. There are no functional changes coming with this patch. However, the availability of the ap_message struct has advantages which will be needed by a follow up patch. Signed-off-by: Harald Freudenberger Signed-off-by: Vasily Gorbik

s390/ap/zcrypt: revisit ap and zcrypt error handling

2020-10-07T19:50:01Z

Revisit the ap queue error handling: Based on discussions and evaluatios with the firmware folk here is now a rework of the response code handling for all the AP instructions. The idea is to distinguish between failures because of some kind of invalid request where a retry does not make any sense and a failure where another attempt to send the very same request may succeed. The first case is handled by returning EINVAL to the userspace application. The second case results in retries within the zcrypt API controlled by a per message retry counter. Revisit the zcrpyt error handling: Similar here, based on discussions with the firmware people here comes a rework of the handling of all the reply codes. Main point here is that there are only very few cases left, where a zcrypt device queue is switched to offline. It should never be the case that an AP reply message is 'unknown' to the device driver as it indicates a total mismatch between device driver and crypto card firmware. In all other cases, the code distinguishes between failure because of invalid message (see above - EINVAL) or failures of the infrastructure (see above - EAGAIN). Signed-off-by: Harald Freudenberger Signed-off-by: Vasily Gorbik

s390/ap: Support AP card SCLP config and deconfig operations

2020-10-07T19:50:01Z

Support SCLP AP adapter config and deconfig operations: The sysfs deconfig attribute /sys/devices/ap/cardxx/deconfig for each AP card is now read-write. Writing in a '1' triggers a synchronous SCLP request to configure the adapter, writing in a '0' sends a synchronous SCLP deconfigure request. Signed-off-by: Harald Freudenberger Signed-off-by: Vasily Gorbik

s390/ap: add card/queue deconfig state

2020-10-07T19:50:00Z

This patch adds a new config state to the ap card and queue devices. This state reflects the response code 0x03 "AP deconfigured" on TQAP invocation and is tracked with every ap bus scan. Together with this new state now a card/queue device which is 'deconfigured' is not disposed any more. However, for backward compatibility the online state now needs to take this state into account. So a card/queue is offline when the device is not configured. Furthermore a device can't get switched from offline to online state when not configured. The config state is shown in sysfs at /sys/devices/ap/cardxx/config for the card and /sys/devices/ap/cardxx/xx.yyyy/config for each queue within each card. It is a read-only attribute reflecting the negation of the 'AP deconfig' state as it is noted in the AP documents. Signed-off-by: Harald Freudenberger Signed-off-by: Vasily Gorbik

s390/ap: add error response code field for ap queue devices

2020-10-07T19:50:00Z

On AP instruction failures the last response code is now kept in the struct ap_queue. There is also a new sysfs attribute showing this field (enabled only on debug kernels). Also slight rework of the AP_DBF macros to get some more content into one debug feature message line. Signed-off-by: Harald Freudenberger Signed-off-by: Vasily Gorbik

s390/ap: split ap queue state machine state from device state

2020-10-07T19:49:59Z

The state machine for each ap queue covered a mixture of device states and state machine (firmware queue state) states. This patch splits the device states and the state machine states into two different enums and variables. The major state is the device state with currently these values: AP_DEV_STATE_UNINITIATED - fresh and virgin, not touched AP_DEV_STATE_OPERATING - queue dev is working normal AP_DEV_STATE_SHUTDOWN - remove/unbind/shutdown in progress AP_DEV_STATE_ERROR - device is in error state only when the device state is > UNINITIATED the state machine is run. The state machine represents the states of the firmware queue: AP_SM_STATE_RESET_START - starting point, reset (RAPQ) ap queue AP_SM_STATE_RESET_WAIT - reset triggered, waiting to be finished if irqs enabled, set up irq (AQIC) AP_SM_STATE_SETIRQ_WAIT - enable irq triggered, waiting to be finished, then go to IDLE AP_SM_STATE_IDLE - queue is operational but empty AP_SM_STATE_WORKING - queue is operational, requests are stored and replies may wait for getting fetched AP_SM_STATE_QUEUE_FULL - firmware queue is full, so only replies can get fetched For debugging each ap queue shows a sysfs attribute 'states' which displays the device and state machine state and is only available when the kernel is build with CONFIG_ZCRYPT_DEBUG enabled. Signed-off-by: Harald Freudenberger Signed-off-by: Vasily Gorbik

s390/zcrypt: introduce msg tracking in zcrypt functions

2020-10-07T19:49:59Z

Introduce a new internal struct zcrypt_track with an retry counter field and a last return code field. Fill and update these fields at certain points during processing of an request/reply. This tracking info is then used to - avoid trying to resend the message forever. Now each message is tried to be send TRACK_AGAIN_MAX (currently 10) times and then the ioctl returns to userspace with errno EAGAIN. - avoid trying to resend the message on the very same card/domain. If possible (more than one APQN with same quality) don't use the very same qid as the previous attempt when again scheduling the request. This is done by adding penalty weight values when the dispatching takes place. There is a penalty TRACK_AGAIN_CARD_WEIGHT_PENALTY for using the same card as previously and another penalty define TRACK_AGAIN_QUEUE_WEIGHT_PENALTY to be considered when the same qid as the previous sent attempt is calculated. Both values make it harder to choose the very same card/domain but not impossible. For example when only one APQN is available a resend can only address the very same APQN. There are some more ideas for the future to extend the use of this tracking information. For example the last response code at NQAP and DQAP could be stored there, giving the possibility to extended tracing and debugging about requests failing to get processed properly. Signed-off-by: Harald Freudenberger Signed-off-by: Vasily Gorbik