wireguard-linux/drivers/s390/net/qeth_core_sys.c, branch jd/orphan-parallel

s390/qeth: use netdev_name()

2020-10-02T23:22:49Z

Replace our custom version of netdev_name(). Once we started to allocate the netdev at probe time with commit d3d1b205e89f ("s390/qeth: allocate netdevice early"), this stopped working as intended anyway. Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller

s390/qeth: allow configuration of TX queues for OSA devices

2020-10-02T23:22:49Z

For OSA devices that are _not_ configured in prio-queue mode, give users the option of selecting the number of active TX queues. This requires setting up the HW queues with a reasonable default QoS value in the QIB's PQUE parm area. As with the other device types, we bring up the device with a minimal number of TX queues for compatibility reasons. Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller

s390/qeth: replace deprecated simple_stroul()

2020-09-23T19:07:54Z

Convert the remaining occurences in sysfs code to kstrtouint(). While at it move some input parsing out of locked sections, replace an open-coded clamp() and remove some unnecessary run-time checks for ipatoe->mask_bits that are already enforced when creating the object. Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller

s390/qeth: clean up error handling for isolation mode cmds

2020-07-14T21:53:45Z

As the cmd IO path has learned to propagate errnos back to its callers, let them deal with errors instead of trying to restore their previous configuration from within the IO error path. Also translate the HW error to a meaningful errno, instead of returning -EIO for all cases (and don't map this to -EOPNOTSUPP later on...). While at it, add a READ_ONCE() / WRITE_ONCE() pair to ensure that the data path always sees a valid isolation mode during reconfiguration. Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller

s390/qeth: return error when starting a reset fails

2020-05-06T21:11:26Z

When starting the reset worker via sysfs is unsuccessful, return an error to the user. Modernize the sysfs input parsing while at it. Signed-off-by: Julian Wiedmann Reviewed-by: Alexandra Winter Signed-off-by: David S. Miller

s390/qeth: keep track of fixed prio-queue configuration

2020-03-25T19:07:15Z

When a device is configured in prio-queue mode to pin all traffic onto a specific HW queue, treat this as a distinct variant of prio-queueing instead of QETH_NO_PRIO_QUEUEING. This corrects an error message from qeth_osa_set_output_queues() for devices configured in such a mode. Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller

s390/qeth: remove prio-queueing support for z/VM NICs

2020-03-18T23:33:35Z

z/VM NICs don't offer HW QoS for TX rings. So just use netdev_pick_tx() to distribute the connections equally over all enabled TX queues. We start with just 1 enabled TX queue (this matches the typical configuration without prio-queueing). A follow-on patch will allow users to enable additional TX queues. Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller

s390/qeth: implement smarter resizing of the RX buffer pool

2020-03-12T06:52:31Z

The RX buffer pool is allocated in qeth_alloc_qdio_queues(). A subsequent pool resizing is then handled in a very simple way: first free the current pool, then allocate a new pool of the requested size. There's two ways where this can go wrong: 1. if the resize action happens _before_ the initial pool was allocated, then a subsequent initialization will call qeth_alloc_qdio_queues() and fill the pool with a second(!) set of pages. We consume twice the planned amount of memory. This is easy to fix - just skip the resizing if the queues haven't been allocated yet. 2. if the initial pool was created by qeth_alloc_qdio_queues() but a subsequent resizing fails, then the device has no(!) RX buffer pool. The next initialization will _not_ call qeth_alloc_qdio_queues(), and attempting to back the RX buffers with pages in qeth_init_qdio_queues() will fail. Not very difficult to fix either - instead of re-allocating the whole pool, just allocate/free as many entries to match the desired size. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller

s390/qeth: remove HARDSETUP state

2020-01-26T14:20:32Z

qeth_l?_stop_card() is _never_ called while in HARDSETUP state, and there's no other usage of the card state that relies on the DOWN -> HARDSETUP -> SOFTSETUP transition. As related cleanup, remove the check in qeth_realloc_buffer_pool() as it is already done by the callers. Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller

s390/qeth: don't return -ENOTSUPP to userspace

2019-12-21T05:00:27Z

ENOTSUPP is not uapi, use EOPNOTSUPP instead. Fixes: d66cb37e9664 ("qeth: Add new priority queueing options") Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller