wireguard-linux/drivers/s390, branch jd/orphan-parallel

s390/ism: fix incorrect system EID

2020-10-26T23:29:14Z

The system EID that is defined by the ISM driver is not correct. Using an incorrect system EID allows to communicate with remote Linux systems that use the same incorrect system EID, but when it comes to interoperability with other operating systems then the system EIDs do never match which prevents SMC-Dv2 communication. Using the correct system EID fixes this problem. Fixes: 201091ebb2a1 ("net/smc: introduce System Enterprise ID (SEID)") Signed-off-by: Karsten Graul Signed-off-by: Jakub Kicinski

Merge tag 's390-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2020-10-16T19:36:38Z

Pull s390 updates from Vasily Gorbik: - Remove address space overrides using set_fs() - Convert to generic vDSO - Convert to generic page table dumper - Add ARCH_HAS_DEBUG_WX support - Add leap seconds handling support - Add NVMe firmware-assisted kernel dump support - Extend NVMe boot support with memory clearing control and addition of kernel parameters - AP bus and zcrypt api code rework. Add adapter configure/deconfigure interface. Extend debug features. Add failure injection support - Add ECC secure private keys support - Add KASan support for running protected virtualization host with 4-level paging - Utilize destroy page ultravisor call to speed up secure guests shutdown - Implement ioremap_wc() and ioremap_prot() with MIO in PCI code - Various checksum improvements - Other small various fixes and improvements all over the code * tag 's390-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (85 commits) s390/uaccess: fix indentation s390/uaccess: add default cases for __put_user_fn()/__get_user_fn() s390/zcrypt: fix wrong format specifications s390/kprobes: move insn_page to text segment s390/sie: fix typo in SIGP code description s390/lib: fix kernel doc for memcmp() s390/zcrypt: Introduce Failure Injection feature s390/zcrypt: move ap_msg param one level up the call chain s390/ap/zcrypt: revisit ap and zcrypt error handling s390/ap: Support AP card SCLP config and deconfig operations s390/sclp: Add support for SCLP AP adapter config/deconfig s390/ap: add card/queue deconfig state s390/ap: add error response code field for ap queue devices s390/ap: split ap queue state machine state from device state s390/zcrypt: New config switch CONFIG_ZCRYPT_DEBUG s390/zcrypt: introduce msg tracking in zcrypt functions s390/startup: correct early pgm check info formatting s390: remove orphaned extern variables declarations s390/kasan: make sure int handler always run with DAT on s390/ipl: add support to control memory clearing for nvme re-IPL ...

Merge branch 'akpm' (patches from Andrew)

2020-10-16T18:31:55Z

Merge more updates from Andrew Morton: "155 patches. Subsystems affected by this patch series: mm (dax, debug, thp, readahead, page-poison, util, memory-hotplug, zram, cleanups), misc, core-kernel, get_maintainer, MAINTAINERS, lib, bitops, checkpatch, binfmt, ramfs, autofs, nilfs, rapidio, panic, relay, kgdb, ubsan, romfs, and fault-injection" * emailed patches from Andrew Morton : (155 commits) lib, uaccess: add failure injection to usercopy functions lib, include/linux: add usercopy failure capability ROMFS: support inode blocks calculation ubsan: introduce CONFIG_UBSAN_LOCAL_BOUNDS for Clang sched.h: drop in_ubsan field when UBSAN is in trap mode scripts/gdb/tasks: add headers and improve spacing format scripts/gdb/proc: add struct mount & struct super_block addr in lx-mounts command kernel/relay.c: drop unneeded initialization panic: dump registers on panic_on_warn rapidio: fix the missed put_device() for rio_mport_add_riodev rapidio: fix error handling path nilfs2: fix some kernel-doc warnings for nilfs2 autofs: harden ioctl table ramfs: fix nommu mmap with gaps in the page cache mm: remove the now-unnecessary mmget_still_valid() hack mm/gup: take mmap_lock in get_dump_page() binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot coredump: rework elf/elf_fdpic vma_dump_size() into common helper coredump: refactor page range dumping into common helper coredump: let dump_emit() bail out on short writes ...

mm/memory_hotplug: prepare passing flags to add_memory() and friends

2020-10-16T18:11:18Z

We soon want to pass flags, e.g., to mark added System RAM resources. mergeable. Prepare for that. This patch is based on a similar patch by Oscar Salvador: https://lkml.kernel.org/r/20190625075227.15193-3-osalvador@suse.de Signed-off-by: David Hildenbrand Signed-off-by: Andrew Morton Reviewed-by: Juergen Gross # Xen related part Reviewed-by: Pankaj Gupta Acked-by: Wei Liu Cc: Michal Hocko Cc: Dan Williams Cc: Jason Gunthorpe Cc: Baoquan He Cc: Michael Ellerman Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: "Rafael J. Wysocki" Cc: Len Brown Cc: Greg Kroah-Hartman Cc: Vishal Verma Cc: Dave Jiang Cc: "K. Y. Srinivasan" Cc: Haiyang Zhang Cc: Stephen Hemminger Cc: Wei Liu Cc: Heiko Carstens Cc: Vasily Gorbik Cc: Christian Borntraeger Cc: David Hildenbrand Cc: "Michael S. Tsirkin" Cc: Jason Wang Cc: Boris Ostrovsky Cc: Stefano Stabellini Cc: "Oliver O'Halloran" Cc: Pingfan Liu Cc: Nathan Lynch Cc: Libor Pechacek Cc: Anton Blanchard Cc: Leonardo Bras Cc: Ard Biesheuvel Cc: Eric Biederman Cc: Julien Grall Cc: Kees Cook Cc: Roger Pau Monné Cc: Thomas Gleixner Cc: Wei Yang Link: https://lkml.kernel.org/r/20200911103459.10306-5-david@redhat.com Signed-off-by: Linus Torvalds

Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2020-10-16T01:42:13Z

Pull networking updates from Jakub Kicinski: - Add redirect_neigh() BPF packet redirect helper, allowing to limit stack traversal in common container configs and improving TCP back-pressure. Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain. - Expand netlink policy support and improve policy export to user space. (Ge)netlink core performs request validation according to declared policies. Expand the expressiveness of those policies (min/max length and bitmasks). Allow dumping policies for particular commands. This is used for feature discovery by user space (instead of kernel version parsing or trial and error). - Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge. - Allow more than 255 IPv4 multicast interfaces. - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK packets of TCPv6. - In Multi-patch TCP (MPTCP) support concurrent transmission of data on multiple subflows in a load balancing scenario. Enhance advertising addresses via the RM_ADDR/ADD_ADDR options. - Support SMC-Dv2 version of SMC, which enables multi-subnet deployments. - Allow more calls to same peer in RxRPC. - Support two new Controller Area Network (CAN) protocols - CAN-FD and ISO 15765-2:2016. - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit kernel problem. - Add TC actions for implementing MPLS L2 VPNs. - Improve nexthop code - e.g. handle various corner cases when nexthop objects are removed from groups better, skip unnecessary notifications and make it easier to offload nexthops into HW by converting to a blocking notifier. - Support adding and consuming TCP header options by BPF programs, opening the doors for easy experimental and deployment-specific TCP option use. - Reorganize TCP congestion control (CC) initialization to simplify life of TCP CC implemented in BPF. - Add support for shipping BPF programs with the kernel and loading them early on boot via the User Mode Driver mechanism, hence reusing all the user space infra we have. - Support sleepable BPF programs, initially targeting LSM and tracing. - Add bpf_d_path() helper for returning full path for given 'struct path'. - Make bpf_tail_call compatible with bpf-to-bpf calls. - Allow BPF programs to call map_update_elem on sockmaps. - Add BPF Type Format (BTF) support for type and enum discovery, as well as support for using BTF within the kernel itself (current use is for pretty printing structures). - Support listing and getting information about bpf_links via the bpf syscall. - Enhance kernel interfaces around NIC firmware update. Allow specifying overwrite mask to control if settings etc. are reset during update; report expected max time operation may take to users; support firmware activation without machine reboot incl. limits of how much impact reset may have (e.g. dropping link or not). - Extend ethtool configuration interface to report IEEE-standard counters, to limit the need for per-vendor logic in user space. - Adopt or extend devlink use for debug, monitoring, fw update in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx, dpaa2-eth). - In mlxsw expose critical and emergency SFP module temperature alarms. Refactor port buffer handling to make the defaults more suitable and support setting these values explicitly via the DCBNL interface. - Add XDP support for Intel's igb driver. - Support offloading TC flower classification and filtering rules to mscc_ocelot switches. - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as fixed interval period pulse generator and one-step timestamping in dpaa-eth. - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3) offload. - Add Lynx PHY/PCS MDIO module, and convert various drivers which have this HW to use it. Convert mvpp2 to split PCS. - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as 7-port Mediatek MT7531 IP. - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver, and wcn3680 support in wcn36xx. - Improve performance for packets which don't require much offloads on recent Mellanox NICs by 20% by making multiple packets share a descriptor entry. - Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto subtree to drivers/net. Move MDIO drivers out of the phy directory. - Clean up a lot of W=1 warnings, reportedly the actively developed subsections of networking drivers should now build W=1 warning free. - Make sure drivers don't use in_interrupt() to dynamically adapt their code. Convert tasklets to use new tasklet_setup API (sadly this conversion is not yet complete). * tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits) Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH" net, sockmap: Don't call bpf_prog_put() on NULL pointer bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo bpf, sockmap: Add locking annotations to iterator netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements net: fix pos incrementment in ipv6_route_seq_next net/smc: fix invalid return code in smcd_new_buf_create() net/smc: fix valid DMBE buffer sizes net/smc: fix use-after-free of delayed events bpfilter: Fix build error with CONFIG_BPFILTER_UMH cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info bpf: Fix register equivalence tracking. rxrpc: Fix loss of final ack on shutdown rxrpc: Fix bundle counting for exclusive connections netfilter: restore NF_INET_NUMHOOKS ibmveth: Identify ingress large send packets. ibmveth: Switch order of ibmveth_helper calls. cxgb4: handle 4-tuple PEDIT to NAT mode translation selftests: Add VRF route leaking tests ...

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2020-10-14T22:15:35Z

Pull SCSI updates from James Bottomley: "The usual driver updates (ufs, qla2xxx, tcmu, ibmvfc, lpfc, smartpqi, hisi_sas, qedi, qedf, mpt3sas) and minor bug fixes. There are only three core changes: adding sense codes, cleaning up noretry and adding an option for limitless retries" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (226 commits) scsi: hisi_sas: Recover PHY state according to the status before reset scsi: hisi_sas: Filter out new PHY up events during suspend scsi: hisi_sas: Add device link between SCSI devices and hisi_hba scsi: hisi_sas: Add check for methods _PS0 and _PR0 scsi: hisi_sas: Add controller runtime PM support for v3 hw scsi: hisi_sas: Switch to new framework to support suspend and resume scsi: hisi_sas: Use hisi_hba->cq_nvecs for calling calling synchronize_irq() scsi: qedf: Remove redundant assignment to variable 'rc' scsi: lpfc: Remove unneeded variable 'status' in lpfc_fcp_cpu_map_store() scsi: snic: Convert to use DEFINE_SEQ_ATTRIBUTE macro scsi: qla4xxx: Delete unneeded variable 'status' in qla4xxx_process_ddb_changed scsi: sun_esp: Use module_platform_driver to simplify the code scsi: sun3x_esp: Use module_platform_driver to simplify the code scsi: sni_53c710: Use module_platform_driver to simplify the code scsi: qlogicpti: Use module_platform_driver to simplify the code scsi: mac_esp: Use module_platform_driver to simplify the code scsi: jazz_esp: Use module_platform_driver to simplify the code scsi: mvumi: Fix error return in mvumi_io_attach() scsi: lpfc: Drop nodelist reference on error in lpfc_gen_req() scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs() ...

Merge tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block

2020-10-13T19:12:44Z

Pull block updates from Jens Axboe: - Series of merge handling cleanups (Baolin, Christoph) - Series of blk-throttle fixes and cleanups (Baolin) - Series cleaning up BDI, seperating the block device from the backing_dev_info (Christoph) - Removal of bdget() as a generic API (Christoph) - Removal of blkdev_get() as a generic API (Christoph) - Cleanup of is-partition checks (Christoph) - Series reworking disk revalidation (Christoph) - Series cleaning up bio flags (Christoph) - bio crypt fixes (Eric) - IO stats inflight tweak (Gabriel) - blk-mq tags fixes (Hannes) - Buffer invalidation fixes (Jan) - Allow soft limits for zone append (Johannes) - Shared tag set improvements (John, Kashyap) - Allow IOPRIO_CLASS_RT for CAP_SYS_NICE (Khazhismel) - DM no-wait support (Mike, Konstantin) - Request allocation improvements (Ming) - Allow md/dm/bcache to use IO stat helpers (Song) - Series improving blk-iocost (Tejun) - Various cleanups (Geert, Damien, Danny, Julia, Tetsuo, Tian, Wang, Xianting, Yang, Yufen, yangerkun) * tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (191 commits) block: fix uapi blkzoned.h comments blk-mq: move cancel of hctx->run_work to the front of blk_exit_queue blk-mq: get rid of the dead flush handle code path block: get rid of unnecessary local variable block: fix comment and add lockdep assert blk-mq: use helper function to test hw stopped block: use helper function to test queue register block: remove redundant mq check block: invoke blk_mq_exit_sched no matter whether have .exit_sched percpu_ref: don't refer to ref->data if it isn't allocated block: ratelimit handle_bad_sector() message blk-throttle: Re-use the throtl_set_slice_end() blk-throttle: Open code __throtl_de/enqueue_tg() blk-throttle: Move service tree validation out of the throtl_rb_first() blk-throttle: Move the list operation after list validation blk-throttle: Fix IO hang for a corner case blk-throttle: Avoid tracking latency if low limit is invalid blk-throttle: Avoid getting the current time if tg->last_finish_time is 0 blk-throttle: Remove a meaningless parameter for throtl_downgrade_state() block: Remove redundant 'return' statement ...

s390/zcrypt: fix wrong format specifications

2020-10-09T21:45:30Z

Fixes 5 wrong format specification findings found by the kernel test robot in ap_queue.c: warning: format specifies type 'unsigned char' but the argument has type 'int' [-Wformat] __func__, status.response_code, Signed-off-by: Harald Freudenberger Reported-by: kernel test robot Fixes: 2ea2a6099ae3 ("s390/ap: add error response code field for ap queue devices") Signed-off-by: Vasily Gorbik

s390/zcrypt: Introduce Failure Injection feature

2020-10-07T19:50:01Z

Introduce a way to specify additional debug flags with an crpyto request to be able to trigger certain failures within the zcrypt device drivers and/or ap core code. This failure injection possibility is only enabled with a kernel debug build CONFIG_ZCRYPT_DEBUG) and should never be available on a regular kernel running in production environment. Details: * The ioctl(ICARSAMODEXPO) get's a struct ica_rsa_modexpo. If the leftmost bit of the 32 bit unsigned int inputdatalength field is set, the uppermost 16 bits are separated and used as debug flag value. The process is checked to have the CAP_SYS_ADMIN capability enabled or EPERM is returned. * The ioctl(ICARSACRT) get's a struct ica_rsa_modexpo_crt. If the leftmost bit of the 32 bit unsigned int inputdatalength field is set, the uppermost 16 bits are separated and used als debug flag value. The process is checked to have the CAP_SYS_ADMIN capability enabled or EPERM is returned. * The ioctl(ZSECSENDCPRB) used to send CCA CPRBs get's a struct ica_xcRB. If the leftmost bit of the 32 bit unsigned int status field is set, the uppermost 16 bits of this field are used as debug flag value. The process is checked to have the CAP_SYS_ADMIN capability enabled or EPERM is returned. * The ioctl(ZSENDEP11CPRB) used to send EP11 CPRBs get's a struct ep11_urb. If the leftmost bit of the 64 bit unsigned int req_len field is set, the uppermost 16 bits of this field are used as debug flag value. The process is checked to have the CAP_SYS_ADMIN capability enabled or EPERM is returned. So it is possible to send an additional 16 bit value to the zcrypt API to be used to carry a failure injection command which may trigger special behavior within the zcrypt API and layers below. This 16 bit value is for the rest of the test referred as 'fi command' for Failure Injection. The lower 8 bits of the fi command construct a numerical argument in the range of 1-255 and is the 'fi action' to be performed with the request or the resulting reply: * 0x00 (all requests): No failure injection action but flags may be provided which may affect the processing of the request or reply. * 0x01 (only CCA CPRBs): The CPRB's agent_ID field is set to 'FF'. This results in an reply code 0x90 (Transport-Protocol Failure). * 0x02 (only CCA CPRBs): After the APQN to send to has been chosen, the domain field within the CPRB is overwritten with value 99 to enforce an reply with RY 0x8A. * 0x03 (all requests): At NQAP invocation the invalid qid value 0xFF00 is used causing an response code of 0x01 (AP queue not valid). The upper 8 bits of the fi command may carry bit flags which may influence the processing of an request or response: * 0x01: No retry. If this bit is set, the usual loop in the zcrypt API which retries an CPRB up to 10 times when the lower layers return with EAGAIN is abandoned after the first attempt to send the CPRB. * 0x02: Toggle special. Toggles the special bit on this request. This should result in an reply code RY~0x41 and result in an ioctl failure with errno EINVAL. This failure injection possibilities may get some further extensions in the future. As of now this is a starting point for Continuous Test and Integration to trigger some failures and watch for the reaction of the ap bus and zcrypt device driver code. Signed-off-by: Harald Freudenberger Signed-off-by: Vasily Gorbik

s390/zcrypt: move ap_msg param one level up the call chain

2020-10-07T19:50:01Z

Move the creating and disposal of the struct ap_message one level up the call chain. The ap message was constructed in the calling functions in msgtype50 and msgtype6 but only for the ica rsa messages. For CCA and EP11 CPRBs the ap message struct is created in the zcrypt api functions. This patch moves the construction of the ap message struct into the functions zcrypt_rsa_modexpo and zcrypt_rsa_crt. So now all the 4 zcrypt api functions zcrypt_rsa_modexpo, zcrypt_rsa_crt, zcrypt_send_cprb and zcrypt_send_ep11_cprb appear and act similar. There are no functional changes coming with this patch. However, the availability of the ap_message struct has advantages which will be needed by a follow up patch. Signed-off-by: Harald Freudenberger Signed-off-by: Vasily Gorbik