wireguard-linux/drivers/s390, branch update-toolchain

Merge tag 'block-6.11-20240824' of git://git.kernel.dk/linux

2024-08-16T21:03:31Z

Pull block fixes from Jens Axboe: - Fix corruption issues with s390/dasd (Eric, Stefan) - Fix a misuse of non irq locking grab of a lock (Li) - MD pull request with a single data corruption fix for raid1 (Yu) * tag 'block-6.11-20240824' of git://git.kernel.dk/linux: block: Fix lockdep warning in blk_mq_mark_tag_wait md/raid1: Fix data corruption for degraded array with slow disk s390/dasd: fix error recovery leading to data corruption on ESE devices s390/dasd: Remove DMA alignment

s390/dasd: fix error recovery leading to data corruption on ESE devices

2024-08-12T16:31:08Z

Extent Space Efficient (ESE) or thin provisioned volumes need to be formatted on demand during usual IO processing. The dasd_ese_needs_format function checks for error codes that signal the non existence of a proper track format. The check for incorrect length is to imprecise since other error cases leading to transport of insufficient data also have this flag set. This might lead to data corruption in certain error cases for example during a storage server warmstart. Fix by removing the check for incorrect length and replacing by explicitly checking for invalid track format in transport mode. Also remove the check for file protected since this is not a valid ESE handling case. Cc: stable@vger.kernel.org # 5.3+ Fixes: 5e2b17e712cf ("s390/dasd: Add dynamic formatting support for ESE volumes") Reviewed-by: Jan Hoeppner Signed-off-by: Stefan Haberland Link: https://lore.kernel.org/r/20240812125733.126431-3-sth@linux.ibm.com Signed-off-by: Jens Axboe

s390/dasd: Remove DMA alignment

2024-08-12T16:31:08Z

This reverts commit bc792884b76f ("s390/dasd: Establish DMA alignment"). Quoting the original commit: linux-next commit bf8d08532bc1 ("iomap: add support for dma aligned direct-io") changes the alignment requirement to come from the block device rather than the block size, and the default alignment requirement is 512-byte boundaries. Since DASD I/O has page alignments for IDAW/TIDAW requests, let's override this value to restore the expected behavior. I mentioned TIDAW, but that was wrong. TIDAWs have no distinct alignment requirement (per p. 15-70 of POPS SA22-7832-13): Unless otherwise specified, TIDAWs may designate a block of main storage on any boundary and length up to 4K bytes, provided the specified block does not cross a 4 K-byte boundary. IDAWs do, but the original commit neglected that while ECKD DASD are typically formatted in 4096-byte blocks, they don't HAVE to be. Formatting an ECKD volume with smaller blocks is permitted (dasdfmt -b xxx), and the problematic commit enforces alignment properties to such a device that will result in errors, such as: [test@host ~]# lsdasd -l a367 | grep blksz blksz: 512 [test@host ~]# mkfs.xfs -f /dev/disk/by-path/ccw-0.0.a367-part1 meta-data=/dev/dasdc1 isize=512 agcount=4, agsize=230075 blks = sectsz=512 attr=2, projid32bit=1 = crc=1 finobt=1, sparse=1, rmapbt=1 = reflink=1 bigtime=1 inobtcount=1 nrext64=1 data = bsize=4096 blocks=920299, imaxpct=25 = sunit=0 swidth=0 blks naming =version 2 bsize=4096 ascii-ci=0, ftype=1 log =internal log bsize=4096 blocks=16384, version=2 = sectsz=512 sunit=0 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0 error reading existing superblock: Invalid argument mkfs.xfs: pwrite failed: Invalid argument libxfs_bwrite: write failed on (unknown) bno 0x70565c/0x100, err=22 mkfs.xfs: Releasing dirty buffer to free list! found dirty buffer (bulk) on free list! mkfs.xfs: pwrite failed: Invalid argument ...snipped... The original commit omitted the FBA discipline for just this reason, but the formatted block size of the other disciplines was overlooked. The solution to all of this is to revert to the original behavior, such that the block size can be respected. There were two commits [1] that moved this code in the interim, so a straight git-revert is not possible, but the change is straightforward. But what of the original problem? That was manifested with a direct-io QEMU guest, where QEMU itself was changed a month or two later with commit 25474d90aa ("block: use the request length for iov alignment") such that the blamed kernel commit is unnecessary. [1] commit 0127a47f58c6 ("dasd: move queue setup to common code") commit fde07a4d74e3 ("dasd: use the atomic queue limits API") Fixes: bc792884b76f ("s390/dasd: Establish DMA alignment") Reviewed-by: Stefan Haberland Signed-off-by: Eric Farman Signed-off-by: Stefan Haberland Link: https://lore.kernel.org/r/20240812125733.126431-2-sth@linux.ibm.com Signed-off-by: Jens Axboe

s390/cio: Add missing MODULE_DESCRIPTION() macros

2024-07-31T14:30:20Z

With ARCH=s390, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/s390/cio/ccwgroup.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/s390/cio/vfio_ccw.o Add the missing invocations of the MODULE_DESCRIPTION() macro. Reviewed-by: Eric Farman Reviewed-by: Vineeth Vijayan Signed-off-by: Jeff Johnson Link: https://lore.kernel.org/r/20240715-md-s390-drivers-s390-cio-v2-1-97eaa6971124@quicinc.com Signed-off-by: Vasily Gorbik

Merge tag 's390-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2024-07-26T17:47:53Z

Pull more s390 updates from Vasily Gorbik: - Fix KMSAN build breakage caused by the conflict between s390 and mm-stable trees - Add KMSAN page markers for ptdump - Add runtime constant support - Fix __pa/__va for modules under non-GPL licenses by exporting necessary vm_layout struct with EXPORT_SYMBOL to prevent linkage problems - Fix an endless loop in the CF_DIAG event stop in the CPU Measurement Counter Facility code when the counter set size is zero - Remove the PROTECTED_VIRTUALIZATION_GUEST config option and enable its functionality by default - Support allocation of multiple MSI interrupts per device and improve logging of architecture-specific limitations - Add support for lowcore relocation as a debugging feature to catch all null ptr dereferences in the kernel address space, improving detection beyond the current implementation's limited write access protection - Clean up and rework CPU alternatives to allow for callbacks and early patching for the lowcore relocation * tag 's390-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (39 commits) s390: Remove protvirt and kvm config guards for uv code s390/boot: Add cmdline option to relocate lowcore s390/kdump: Make kdump ready for lowcore relocation s390/entry: Make system_call() ready for lowcore relocation s390/entry: Make ret_from_fork() ready for lowcore relocation s390/entry: Make __switch_to() ready for lowcore relocation s390/entry: Make restart_int_handler() ready for lowcore relocation s390/entry: Make mchk_int_handler() ready for lowcore relocation s390/entry: Make int handlers ready for lowcore relocation s390/entry: Make pgm_check_handler() ready for lowcore relocation s390/entry: Add base register to CHECK_VMAP_STACK/CHECK_STACK macro s390/entry: Add base register to SIEEXIT macro s390/entry: Add base register to MBEAR macro s390/entry: Make __sie64a() ready for lowcore relocation s390/head64: Make startup code ready for lowcore relocation s390: Add infrastructure to patch lowcore accesses s390/atomic_ops: Disable flag outputs constraint for GCC versions below 14.2.0 s390/entry: Move SIE indicator flag to thread info s390/nmi: Simplify ptregs setup s390/alternatives: Remove alternative facility list ...

Merge tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2024-07-25T17:42:22Z

Pull driver core updates from Greg KH: "Here is the big set of driver core changes for 6.11-rc1. Lots of stuff in here, with not a huge diffstat, but apis are evolving which required lots of files to be touched. Highlights of the changes in here are: - platform remove callback api final fixups (Uwe took many releases to get here, finally!) - Rust bindings for basic firmware apis and initial driver-core interactions. It's not all that useful for a "write a whole driver in rust" type of thing, but the firmware bindings do help out the phy rust drivers, and the driver core bindings give a solid base on which others can start their work. There is still a long way to go here before we have a multitude of rust drivers being added, but it's a great first step. - driver core const api changes. This reached across all bus types, and there are some fix-ups for some not-common bus types that linux-next and 0-day testing shook out. This work is being done to help make the rust bindings more safe, as well as the C code, moving toward the end-goal of allowing us to put driver structures into read-only memory. We aren't there yet, but are getting closer. - minor devres cleanups and fixes found by code inspection - arch_topology minor changes - other minor driver core cleanups All of these have been in linux-next for a very long time with no reported problems" * tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits) ARM: sa1100: make match function take a const pointer sysfs/cpu: Make crash_hotplug attribute world-readable dio: Have dio_bus_match() callback take a const * zorro: make match function take a const pointer driver core: module: make module_[add|remove]_driver take a const * driver core: make driver_find_device() take a const * driver core: make driver_[create|remove]_file take a const * firmware_loader: fix soundness issue in `request_internal` firmware_loader: annotate doctests as `no_run` devres: Correct code style for functions that return a pointer type devres: Initialize an uninitialized struct member devres: Fix memory leakage caused by driver API devm_free_percpu() devres: Fix devm_krealloc() wasting memory driver core: platform: Switch to use kmemdup_array() driver core: have match() callback in struct bus_type take a const * MAINTAINERS: add Rust device abstractions to DRIVER CORE device: rust: improve safety comments MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER firmware: rust: improve safety comments ...

s390: Remove protvirt and kvm config guards for uv code

2024-07-23T14:02:33Z

Removing the CONFIG_PROTECTED_VIRTUALIZATION_GUEST ifdefs and config option as well as CONFIG_KVM ifdefs in uv files. Having this configurable has been more of a pain than a help. It's time to remove the ifdefs and the config option. Signed-off-by: Janosch Frank Acked-by: Christian Borntraeger Acked-by: Heiko Carstens Signed-off-by: Vasily Gorbik

Merge tag 'for-6.11/block-20240722' of git://git.kernel.dk/linux

2024-07-22T18:32:05Z

Pull more block updates from Jens Axboe: - MD fixes via Song: - md-cluster fixes (Heming Zhao) - raid1 fix (Mateusz Jończyk) - s390/dasd module description (Jeff) - Series cleaning up and hardening the blk-mq debugfs flag handling (John, Christoph) - blk-cgroup cleanup (Xiu) - Error polled IO attempts if backend doesn't support it (hexue) - Fix for an sbitmap hang (Yang) * tag 'for-6.11/block-20240722' of git://git.kernel.dk/linux: (23 commits) blk-cgroup: move congestion_count to struct blkcg sbitmap: fix io hung due to race on sbitmap_word::cleared block: avoid polling configuration errors block: Catch possible entries missing from rqf_name[] block: Simplify definition of RQF_NAME() block: Use enum to define RQF_x bit indexes block: Catch possible entries missing from cmd_flag_name[] block: Catch possible entries missing from alloc_policy_name[] block: Catch possible entries missing from hctx_flag_name[] block: Catch possible entries missing from hctx_state_name[] block: Catch possible entries missing from blk_queue_flag_name[] block: Make QUEUE_FLAG_x as an enum block: Relocate BLK_MQ_MAX_DEPTH block: Relocate BLK_MQ_CPU_WORK_BATCH block: remove QUEUE_FLAG_STOPPED block: Add missing entry to hctx_flag_name[] block: Add zone write plugging entry to rqf_name[] block: Add missing entries from cmd_flag_name[] s390/dasd: fix error checks in dasd_copy_pair_store() s390/dasd: add missing MODULE_DESCRIPTION() macros ...

Merge tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2024-07-22T00:15:46Z

Pull MM updates from Andrew Morton: - In the series "mm: Avoid possible overflows in dirty throttling" Jan Kara addresses a couple of issues in the writeback throttling code. These fixes are also targetted at -stable kernels. - Ryusuke Konishi's series "nilfs2: fix potential issues related to reserved inodes" does that. This should actually be in the mm-nonmm-stable tree, along with the many other nilfs2 patches. My bad. - More folio conversions from Kefeng Wang in the series "mm: convert to folio_alloc_mpol()" - Kemeng Shi has sent some cleanups to the writeback code in the series "Add helper functions to remove repeated code and improve readability of cgroup writeback" - Kairui Song has made the swap code a little smaller and a little faster in the series "mm/swap: clean up and optimize swap cache index". - In the series "mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David Hildenbrand has reworked the rather sketchy handling of the use of the zeropage in MAP_SHARED mappings. I don't see any runtime effects here - more a cleanup/understandability/maintainablity thing. - Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling of higher addresses, for aarch64. The (poorly named) series is "Restructure va_high_addr_switch". - The core TLB handling code gets some cleanups and possible slight optimizations in Bang Li's series "Add update_mmu_tlb_range() to simplify code". - Jane Chu has improved the handling of our fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in the series "Enhance soft hwpoison handling and injection". - Jeff Johnson has sent a billion patches everywhere to add MODULE_DESCRIPTION() to everything. Some landed in this pull. - In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang has simplified migration's use of hardware-offload memory copying. - Yosry Ahmed performs more folio API conversions in his series "mm: zswap: trivial folio conversions". - In the series "large folios swap-in: handle refault cases first", Chuanhua Han inches us forward in the handling of large pages in the swap code. This is a cleanup and optimization, working toward the end objective of full support of large folio swapin/out. - In the series "mm,swap: cleanup VMA based swap readahead window calculation", Huang Ying has contributed some cleanups and a possible fixlet to his VMA based swap readahead code. - In the series "add mTHP support for anonymous shmem" Baolin Wang has taught anonymous shmem mappings to use multisize THP. By default this is a no-op - users must opt in vis sysfs controls. Dramatic improvements in pagefault latency are realized. - David Hildenbrand has some cleanups to our remaining use of page_mapcount() in the series "fs/proc: move page_mapcount() to fs/proc/internal.h". - David also has some highmem accounting cleanups in the series "mm/highmem: don't track highmem pages manually". - Build-time fixes and cleanups from John Hubbard in the series "cleanups, fixes, and progress towards avoiding "make headers"". - Cleanups and consolidation of the core pagemap handling from Barry Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers and utilize them". - Lance Yang's series "Reclaim lazyfree THP without splitting" has reduced the latency of the reclaim of pmd-mapped THPs under fairly common circumstances. A 10x speedup is seen in a microbenchmark. It does this by punting to aother CPU but I guess that's a win unless all CPUs are pegged. - hugetlb_cgroup cleanups from Xiu Jianfeng in the series "mm/hugetlb_cgroup: rework on cftypes". - Miaohe Lin's series "Some cleanups for memory-failure" does just that thing. - Someone other than SeongJae has developed a DAMON feature in Honggyu Kim's series "DAMON based tiered memory management for CXL memory". This adds DAMON features which may be used to help determine the efficiency of our placement of CXL/PCIe attached DRAM. - DAMON user API centralization and simplificatio work in SeongJae Park's series "mm/damon: introduce DAMON parameters online commit function". - In the series "mm: page_type, zsmalloc and page_mapcount_reset()" David Hildenbrand does some maintenance work on zsmalloc - partially modernizing its use of pageframe fields. - Kefeng Wang provides more folio conversions in the series "mm: remove page_maybe_dma_pinned() and page_mkclean()". - More cleanup from David Hildenbrand, this time in the series "mm/memory_hotplug: use PageOffline() instead of PageReserved() for !ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline() pages" and permits the removal of some virtio-mem hacks. - Barry Song's series "mm: clarify folio_add_new_anon_rmap() and __folio_add_anon_rmap()" is a cleanup to the anon folio handling in preparation for mTHP (multisize THP) swapin. - Kefeng Wang's series "mm: improve clear and copy user folio" implements more folio conversions, this time in the area of large folio userspace copying. - The series "Docs/mm/damon/maintaier-profile: document a mailing tool and community meetup series" tells people how to get better involved with other DAMON developers. From SeongJae Park. - A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does that. - David Hildenbrand sends along more cleanups, this time against the migration code. The series is "mm/migrate: move NUMA hinting fault folio isolation + checks under PTL". - Jan Kara has found quite a lot of strangenesses and minor errors in the readahead code. He addresses this in the series "mm: Fix various readahead quirks". - SeongJae Park's series "selftests/damon: test DAMOS tried regions and {min,max}_nr_regions" adds features and addresses errors in DAMON's self testing code. - Gavin Shan has found a userspace-triggerable WARN in the pagecache code. The series "mm/filemap: Limit page cache size to that supported by xarray" addresses this. The series is marked cc:stable. - Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations and cleanup" cleans up and slightly optimizes KSM. - Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of code motion. The series (which also makes the memcg-v1 code Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put under config option" and "mm: memcg: put cgroup v1-specific memcg data under CONFIG_MEMCG_V1" - Dan Schatzberg's series "Add swappiness argument to memory.reclaim" adds an additional feature to this cgroup-v2 control file. - The series "Userspace controls soft-offline pages" from Jiaqi Yan permits userspace to stop the kernel's automatic treatment of excessive correctable memory errors. In order to permit userspace to monitor and handle this situation. - Kefeng Wang's series "mm: migrate: support poison recover from migrate folio" teaches the kernel to appropriately handle migration from poisoned source folios rather than simply panicing. - SeongJae Park's series "Docs/damon: minor fixups and improvements" does those things. - In the series "mm/zsmalloc: change back to per-size_class lock" Chengming Zhou improves zsmalloc's scalability and memory utilization. - Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for pinning memfd folios" makes the GUP code use FOLL_PIN rather than bare refcount increments. So these paes can first be moved aside if they reside in the movable zone or a CMA block. - Andrii Nakryiko has added a binary ioctl()-based API to /proc/pid/maps for much faster reading of vma information. The series is "query VMAs from /proc//maps". - In the series "mm: introduce per-order mTHP split counters" Lance Yang improves the kernel's presentation of developer information related to multisize THP splitting. - Michael Ellerman has developed the series "Reimplement huge pages without hugepd on powerpc (8xx, e500, book3s/64)". This permits userspace to use all available huge page sizes. - In the series "revert unconditional slab and page allocator fault injection calls" Vlastimil Babka removes a performance-affecting and not very useful feature from slab fault injection. * tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (411 commits) mm/mglru: fix ineffective protection calculation mm/zswap: fix a white space issue mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio mm/hugetlb: fix possible recursive locking detected warning mm/gup: clear the LRU flag of a page before adding to LRU batch mm/numa_balancing: teach mpol_to_str about the balancing mode mm: memcg1: convert charge move flags to unsigned long long alloc_tag: fix page_ext_get/page_ext_put sequence during page splitting lib: reuse page_ext_data() to obtain codetag_ref lib: add missing newline character in the warning message mm/mglru: fix overshooting shrinker memory mm/mglru: fix div-by-zero in vmpressure_calc_level() mm/kmemleak: replace strncpy() with strscpy() mm, page_alloc: put should_fail_alloc_page() back behing CONFIG_FAIL_PAGE_ALLOC mm, slab: put should_failslab() back behind CONFIG_SHOULD_FAILSLAB mm: ignore data-race in __swap_writepage hugetlbfs: ensure generic_hugetlb_get_unmapped_area() returns higher address than mmap_min_addr mm: shmem: rename mTHP shmem counters mm: swap_state: use folio_alloc_mpol() in __read_swap_cache_async() mm/migrate: putback split folios when numa hint migration fails ...

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

2024-07-19T18:57:55Z

Pull virtio updates from Michael Tsirkin: "Several new features here: - Virtio find vqs API has been reworked (required to fix the scalability issue we have with adminq, which I hope to merge later in the cycle) - vDPA driver for Marvell OCTEON - virtio fs performance improvement - mlx5 migration speedups Fixes, cleanups all over the place" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (56 commits) virtio: rename virtio_find_vqs_info() to virtio_find_vqs() virtio: remove unused virtio_find_vqs() and virtio_find_vqs_ctx() helpers virtio: convert the rest virtio_find_vqs() users to virtio_find_vqs_info() virtio_balloon: convert to use virtio_find_vqs_info() virtiofs: convert to use virtio_find_vqs_info() scsi: virtio_scsi: convert to use virtio_find_vqs_info() virtio_net: convert to use virtio_find_vqs_info() virtio_crypto: convert to use virtio_find_vqs_info() virtio_console: convert to use virtio_find_vqs_info() virtio_blk: convert to use virtio_find_vqs_info() virtio: rename find_vqs_info() op to find_vqs() virtio: remove the original find_vqs() op virtio: call virtio_find_vqs_info() from virtio_find_single_vq() directly virtio: convert find_vqs() op implementations to find_vqs_info() virtio_pci: convert vp_*find_vqs() ops to find_vqs_info() virtio: introduce virtio_queue_info struct and find_vqs_info() config op virtio: make virtio_find_single_vq() call virtio_find_vqs() virtio: make virtio_find_vqs() call virtio_find_vqs_ctx() caif_virtio: use virtio_find_single_vq() for single virtqueue finding vdpa/mlx5: Don't enable non-active VQs in .set_vq_ready() ...