wireguard-linux/drivers/tty, branch stable

serial: 8250_mtk: Enable baud clock and manage in runtime PM

2025-10-22T10:13:54Z

Some MediaTek SoCs got a gated UART baud clock, which currently gets disabled as the clk subsystem believes it would be unused. This results in the uart freezing right after "clk: Disabling unused clocks" on those platforms. Request the baud clock to be prepared and enabled during probe, and to restore run-time power management capabilities to what it was before commit e32a83c70cf9 ("serial: 8250-mtk: modify mtk uart power and clock management") disable and unprepare the baud clock when suspending the UART, prepare and enable it again when resuming it. Fixes: e32a83c70cf9 ("serial: 8250-mtk: modify mtk uart power and clock management") Fixes: b6c7ff2693ddc ("serial: 8250_mtk: Simplify clock sequencing and runtime PM") Cc: stable Reviewed-by: AngeloGioacchino Del Regno Signed-off-by: Daniel Golle Link: https://patch.msgid.link/de5197ccc31e1dab0965cabcc11ca92e67246cf6.1758058441.git.daniel@makrotopia.org Signed-off-by: Greg Kroah-Hartman

serial: 8250_dw: handle reset control deassert error

2025-10-22T10:13:12Z

Check the return value of reset_control_deassert() in the probe function to prevent continuing probe when reset deassertion fails. Previously, reset_control_deassert() was called without checking its return value, which could lead to probe continuing even when the device reset wasn't properly deasserted. The fix checks the return value and returns an error with dev_err_probe() if reset deassertion fails, providing better error handling and diagnostics. Fixes: acbdad8dd1ab ("serial: 8250_dw: simplify optional reset handling") Cc: stable Signed-off-by: Artem Shimko Link: https://patch.msgid.link/20251019095131.252848-1-a.shimko.dev@gmail.com Signed-off-by: Greg Kroah-Hartman

serial: sc16is7xx: remove useless enable of enhanced features

2025-10-22T10:12:06Z

Commit 43c51bb573aa ("sc16is7xx: make sure device is in suspend once probed") permanently enabled access to the enhanced features in sc16is7xx_probe(), and it is never disabled after that. Therefore, remove re-enable of enhanced features in sc16is7xx_set_baud(). This eliminates a potential useless read + write cycle each time the baud rate is reconfigured. Fixes: 43c51bb573aa ("sc16is7xx: make sure device is in suspend once probed") Cc: stable Signed-off-by: Hugo Villeneuve Link: https://patch.msgid.link/20251006142002.177475-1-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman

serial: 8250_exar: add support for Advantech 2 port card with Device ID 0x0018

2025-10-22T10:11:55Z

The Advantech 2-port serial card with PCI vendor=0x13fe and device=0x0018 has a 'XR17V35X' chip installed on the circuit board. Therefore, this driver can be used instead of theu outdated out-of-tree driver from the manufacturer. Signed-off-by: Florian Eckert Cc: stable Link: https://patch.msgid.link/20250924134115.2667650-1-fe@dev.tdt.de Signed-off-by: Greg Kroah-Hartman

tty: serial: sh-sci: fix RSCI FIFO overrun handling

2025-10-22T10:11:17Z

The receive error handling code is shared between RSCI and all other SCIF port types, but the RSCI overrun_reg is specified as a memory offset, while for other SCIF types it is an enum value used to index into the sci_port_params->regs array, as mentioned above the sci_serial_in() function. For RSCI, the overrun_reg is CSR (0x48), causing the sci_getreg() call inside the sci_handle_fifo_overrun() function to index outside the bounds of the regs array, which currently has a size of 20, as specified by SCI_NR_REGS. Because of this, we end up accessing memory outside of RSCI's rsci_port_params structure, which, when interpreted as a plat_sci_reg, happens to have a non-zero size, causing the following WARN when sci_serial_in() is called, as the accidental size does not match the supported register sizes. The existence of the overrun_reg needs to be checked because SCIx_SH3_SCIF_REGTYPE has overrun_reg set to SCLSR, but SCLSR is not present in the regs array. Avoid calling sci_getreg() for port types which don't use standard register handling. Use the ops->read_reg() and ops->write_reg() functions to properly read and write registers for RSCI, and change the type of the status variable to accommodate the 32-bit CSR register. sci_getreg() and sci_serial_in() are also called with overrun_reg in the sci_mpxed_interrupt() interrupt handler, but that code path is not used for RSCI, as it does not have a muxed interrupt. ------------[ cut here ]------------ Invalid register access WARNING: CPU: 0 PID: 0 at drivers/tty/serial/sh-sci.c:522 sci_serial_in+0x38/0xac Modules linked in: renesas_usbhs at24 rzt2h_adc industrialio_adc sha256 cfg80211 bluetooth ecdh_generic ecc rfkill fuse drm backlight ipv6 CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.17.0-rc1+ #30 PREEMPT Hardware name: Renesas RZ/T2H EVK Board based on r9a09g077m44 (DT) pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : sci_serial_in+0x38/0xac lr : sci_serial_in+0x38/0xac sp : ffff800080003e80 x29: ffff800080003e80 x28: ffff800082195b80 x27: 000000000000000d x26: ffff8000821956d0 x25: 0000000000000000 x24: ffff800082195b80 x23: ffff000180e0d800 x22: 0000000000000010 x21: 0000000000000000 x20: 0000000000000010 x19: ffff000180e72000 x18: 000000000000000a x17: ffff8002bcee7000 x16: ffff800080000000 x15: 0720072007200720 x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 x11: 0000000000000058 x10: 0000000000000018 x9 : ffff8000821a6a48 x8 : 0000000000057fa8 x7 : 0000000000000406 x6 : ffff8000821fea48 x5 : ffff00033ef88408 x4 : ffff8002bcee7000 x3 : ffff800082195b80 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff800082195b80 Call trace: sci_serial_in+0x38/0xac (P) sci_handle_fifo_overrun.isra.0+0x70/0x134 sci_er_interrupt+0x50/0x39c __handle_irq_event_percpu+0x48/0x140 handle_irq_event+0x44/0xb0 handle_fasteoi_irq+0xf4/0x1a0 handle_irq_desc+0x34/0x58 generic_handle_domain_irq+0x1c/0x28 gic_handle_irq+0x4c/0x140 call_on_irq_stack+0x30/0x48 do_interrupt_handler+0x80/0x84 el1_interrupt+0x34/0x68 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x6c/0x70 default_idle_call+0x28/0x58 (P) do_idle+0x1f8/0x250 cpu_startup_entry+0x34/0x3c rest_init+0xd8/0xe0 console_on_rootfs+0x0/0x6c __primary_switched+0x88/0x90 ---[ end trace 0000000000000000 ]--- Cc: stable Fixes: 0666e3fe95ab ("serial: sh-sci: Add support for RZ/T2H SCI") Signed-off-by: Cosmin Tanislav Link: https://patch.msgid.link/20250923154707.1089900-1-cosmin-gabriel.tanislav.xa@renesas.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'tty-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2025-10-07T18:36:01Z

Pull tty driver fix from Greg KH: "Here is a single driver fix for the qcom_geni_serial driver. It has been in my tree for weeks, but missed being sent to you for 6.17-final due to travel on my side. This fixes a reported regression for this driver that prevents 6.17 from working properly on this platform. It has been in linux-next for many weeks with no reported issues" * tag 'tty-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: qcom-geni: Fix blocked task

Merge tag 'tty-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2025-10-04T22:57:44Z

Pull tty/serial updates from Greg KH: "Here are some small updates for tty/serial drivers for 6.18-rc1. Not many changes overall, just the usual: - abi cleanups and reworking of the tty functions by Jiri by adding console lock guard logic - 8250_platform driver updates - qcom-geni driver updates - other minor serial driver updates - some more vt escape codes added All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (43 commits) tty: serial: fix help message for SERIAL_CPM serial: 8250: omap: Support wakeup pinctrl state on suspend dt-bindings: serial: 8250_omap: Add wakeup pinctrl state serial: max310x: improve interrupt handling vt: move vc_saved_screen to within tty allocated judgment Revert "m68k: make HPDCA and HPAPCI bools" tty: remove redundant condition checks tty/vt: Add missing return value for VT_RESIZE in vt_ioctl() vt: remove redundant check on vc_mode in con_font_set() serial: qcom-geni: Add DFS clock mode support to GENI UART driver m68k: make HPDCA and HPAPCI bools tty: n_gsm: Don't block input queue by waiting MSC serial: qcom-geni: Fix off-by-one error in ida_alloc_range() serdev: Drop dev_pm_domain_detach() call serial: sc16is7xx: drop redundant conversion to bool vt: add support for smput/rmput escape codes serial: stm32: allow selecting console when the driver is module serial: 8250_core: fix coding style issue tty: serial: Modify the use of dev_err_probe() s390/char/con3270: use tty_port_tty guard() ...

Merge tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2025-10-02T00:32:51Z

Pull SoC driver updates from Arnd Bergmann: "Lots of platform specific updates for Qualcomm SoCs, including a new TEE subsystem driver for the Qualcomm QTEE firmware interface. Added support for the Apple A11 SoC in drivers that are shared with the M1/M2 series, among more updates for those. Smaller platform specific driver updates for Renesas, ASpeed, Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale SoCs. Driver updates in the cache controller, memory controller and reset controller subsystems. SCMI firmware updates to add more features and improve robustness. This includes support for having multiple SCMI providers in a single system. TEE subsystem support for protected DMA-bufs, allowing hardware to access memory areas that managed by the kernel but remain inaccessible from the CPU in EL1/EL0" * tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits) soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu() soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver soc: fsl: qe: Change GPIO driver to a proper platform driver tee: fix register_shm_helper() pmdomain: apple: Add "apple,t8103-pmgr-pwrstate" dt-bindings: spmi: Add Apple A11 and T2 compatible serial: qcom-geni: Load UART qup Firmware from linux side spi: geni-qcom: Load spi qup Firmware from linux side i2c: qcom-geni: Load i2c qup Firmware from linux side soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem soc: qcom: geni-se: Cleanup register defines and update copyright dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus Documentation: tee: Add Qualcomm TEE driver tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl tee: qcom: add primordial object tee: add Qualcomm TEE driver tee: increase TEE_MAX_ARG_SIZE to 4096 tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF tee: add close_context to TEE driver operation ...

Merge tag 'qcom-drivers-for-6.18-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers

2025-09-23T20:56:36Z

More Qualcomm device driver updates for v6.18 Introduce support for loading firmware into the QUP serial engines from Linux, which allows deferring selection of which protocol (uart, i2c, spi, etc) a given SE should have until the OS loads. Also introduce the "object invoke" interface in the SCM driver, to provide interface to the Qualcomm TEE driver. * tag 'qcom-drivers-for-6.18-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: serial: qcom-geni: Load UART qup Firmware from linux side spi: geni-qcom: Load spi qup Firmware from linux side i2c: qcom-geni: Load i2c qup Firmware from linux side soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem soc: qcom: geni-se: Cleanup register defines and update copyright dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus firmware: qcom: scm: add support for object invocation firmware: qcom: tzmem: export shm_bridge create/delete Link: https://lore.kernel.org/r/20250921020225.595403-1-andersson@kernel.org Signed-off-by: Arnd Bergmann

serial: qcom-geni: Load UART qup Firmware from linux side

2025-09-17T18:51:08Z

Add provision to load firmware of Serial engine for UART protocol from Linux Execution Environment on running on APPS processor. Co-developed-by: Mukesh Kumar Savaliya Signed-off-by: Mukesh Kumar Savaliya Signed-off-by: Viken Dadhaniya Link: https://lore.kernel.org/r/20250911043256.3523057-7-viken.dadhaniya@oss.qualcomm.com Signed-off-by: Bjorn Andersson