wireguard-linux/drivers/usb/serial/mos7720.c, branch jd/unified-crypt-queue

USB: serial: mos7720: fix remote wakeup

2019-11-12T08:53:07Z

The driver was setting the device remote-wakeup feature during probe in violation of the USB specification (which says it should only be set just prior to suspending the device). This could potentially waste power during suspend as well as lead to spurious wakeups. Note that USB core would clear the remote-wakeup feature at first resume. Fixes: 0f64478cbc7a ("USB: add USB serial mos7720 driver") Cc: stable # 2.6.19 Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold

USB: serial: mos7720: fix mos_parport refcount imbalance on error path

2019-03-20T12:58:42Z

The write_parport_reg_nonblock() helper takes a reference to the struct mos_parport, but failed to release it in a couple of error paths after allocation failures, leading to a memory leak. Johan said that move the kref_get() and mos_parport assignment to the end of urbtrack initialisation is a better way, so move it. and mos_parport do not used until urbtrack initialisation. Signed-off-by: Lin Yi Fixes: b69578df7e98 ("USB: usbserial: mos7720: add support for parallel port on moschip 7715") Cc: stable # 2.6.35 Signed-off-by: Johan Hovold

mos7720: switch to ->get_serial()

2018-10-13T04:50:38Z

Reviewed-by: Johan Hovold Signed-off-by: Al Viro

mos7720: bury dead TIOCM... in ->ioctl()

2018-09-14T15:12:37Z

These ioctls never reach driver's ->ioctl() - tty_ioctl() handles them on its own. ->tiocm[gs]et() is what actually gets called, and mos7720 provides those, with results equivalent to what the unreachable code would be doing when called. Signed-off-by: Al Viro

USB: serial: mos7720: remove redundant variables iflag, mask and serial

2018-07-16T12:10:00Z

Variables iflag, mask and serial are being assigned but are never used hence are redundant and can be removed. Cleans up clang warnings: warning: variable 'iflag' set but not used [-Wunused-but-set-variable] warning: variable 'mask' set but not used [-Wunused-but-set-variable] warning: variable 'serial' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King Signed-off-by: Johan Hovold

USB: serial: mos7720: use irqsave() in USB's complete callback

2018-06-26T12:45:35Z

The USB completion callback does not disable interrupts while acquiring the lock. We want to remove the local_irq_disable() invocation from __usb_hcd_giveback_urb() and therefore it is required for the callback handler to disable the interrupts while acquiring the lock. The callback may be invoked either in IRQ or BH context depending on the USB host controller. Use the _irqsave() variant of the locking primitives. Signed-off-by: John Ogness Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Johan Hovold

USB: serial: remove redundant initializations of 'mos_parport'

2018-01-22T14:34:37Z

The pointer mos_parport is being initialized to pp->private_data and then the assignment is duplicated after a spin lock. Remove the initialization as it occurs before the spin lock and it is a redundant assignment. Cleans up clang warnings: drivers/usb/serial/mos7720.c:521:26: warning: Value stored to 'mos_parport' during its initialization is never read drivers/usb/serial/mos7720.c:557:26: warning: Value stored to 'mos_parport' during its initialization is never read Signed-off-by: Colin Ian King Signed-off-by: Greg Kroah-Hartman

USB: serial: fix module-license macros

2017-11-04T10:58:00Z

Several GPL-2.0 drivers used "GPL" rather than "GPL v2" in their MODULE_LICENSE macros; fix the macros to match the licenses. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: Remove redundant license text

2017-11-04T10:55:38Z

Now that the SPDX tag is in all USB files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Signed-off-by: Greg Kroah-Hartman Acked-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: add SPDX identifiers to all remaining files in drivers/usb/

2017-11-04T10:48:02Z

It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner Cc: Kate Stewart Cc: Philippe Ombredanne Signed-off-by: Greg Kroah-Hartman Acked-by: Felipe Balbi Acked-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman