wireguard-linux/drivers/usb/serial, branch jd/orphan-parallel

Merge tag 'usb-serial-5.10-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next

2020-10-08T15:29:39Z

Johan writes: USB-serial updates for 5.10-rc1 Here are the USB-serial updates for 5.10-rc1, including: - new device ids - various clean ups All have been in linux-next with no reported issues. * tag 'usb-serial-5.10-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add Cellient MPL200 card USB: serial: ftdi_sio: use cur_altsetting for consistency USB: serial: option: Add Telit FT980-KS composition USB: serial: qcserial: fix altsetting probing USB: serial: ftdi_sio: clean up jtag quirks USB: serial: pl2303: add device-id for HP GC device USB: serial: ftdi_sio: add support for FreeCalypso JTAG+UART adapters

USB: serial: option: add Cellient MPL200 card

2020-10-08T14:30:29Z

Add usb ids of the Cellient MPL200 card. Signed-off-by: Wilken Gottwalt Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/3db5418fe9e516f4b290736c5a199c9796025e3c.1601715478.git.wilken.gottwalt@mailbox.org Signed-off-by: Johan Hovold

USB: serial: ftdi_sio: use cur_altsetting for consistency

2020-10-05T11:01:09Z

ftdi_determine_type() function had this construct in it to get the number of the interface it is operating on: inter = serial->interface->altsetting->desc.bInterfaceNumber; Elsewhere in this driver cur_altsetting is used instead for this purpose. Change ftdi_determine_type() to use cur_altsetting for consistency. Signed-off-by: Mychaela N. Falconia [ johan: fix old style issues; drop braces and random white space ] Signed-off-by: Johan Hovold

USB: serial: option: Add Telit FT980-KS composition

2020-10-05T08:13:02Z

This commit adds the following Telit FT980-KS composition: 0x1054: rndis, diag, adb, nmea, modem, modem, aux AT commands can be sent to /dev/ttyUSB2. Signed-off-by: Leonid Bloch Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/ce86bc05-f4e2-b199-0cdc-792715e3f275@asocscloud.com Link: https://lore.kernel.org/r/20201004155813.2342-1-lb.workbox@gmail.com Signed-off-by: Johan Hovold

USB: serial: qcserial: fix altsetting probing

2020-10-01T07:37:30Z

Drivers should not assume that interface descriptors have been parsed in any particular order so use the interface number to look up the second alternate setting. That number is also what the driver later use to switch setting. Note that although the driver could end up verifying the existence of the expected endpoints on the wrong interface, a later sanity check in usb_wwan_port_probe() would have caught this before it could cause any real damage. Fixes: a78b42824dd7 ("USB: serial: add qualcomm wireless modem driver") Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold

USB: serial: ftdi_sio: clean up jtag quirks

2020-10-01T07:37:16Z

Drivers should not assume that interface descriptors have been parsed in any particular order so match on interface number instead when rejecting JTAG interfaces. Also use the interface struct device for notifications so that the interface number is included. Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold

USB: serial: pl2303: add device-id for HP GC device

2020-09-29T10:50:34Z

This is adds a device id for HP LD381 which is a pl2303GC-base device. Signed-off-by: Scott Chen Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold

USB: serial: ftdi_sio: add support for FreeCalypso JTAG+UART adapters

2020-09-29T07:40:11Z

There exist many FT2232-based JTAG+UART adapter designs in which FT2232 Channel A is used for JTAG and Channel B is used for UART. The best way to handle them in Linux is to have the ftdi_sio driver create a ttyUSB device only for Channel B and not for Channel A: a ttyUSB device for Channel A would be bogus and will disappear as soon as the user runs OpenOCD or other applications that access Channel A for JTAG from userspace, causing undesirable noise for users. The ftdi_sio driver already has a dedicated quirk for such JTAG+UART FT2232 adapters, and it requires assigning custom USB IDs to such adapters and adding these IDs to the driver with the ftdi_jtag_quirk applied. Boutique hardware manufacturer Falconia Partners LLC has created a couple of JTAG+UART adapter designs (one buffered, one unbuffered) as part of FreeCalypso project, and this hardware is specifically made to be used with Linux hosts, with the intent that Channel A will be accessed only from userspace via appropriate applications, and that Channel B will be supported by the ftdi_sio kernel driver, presenting a standard ttyUSB device to userspace. Toward this end the hardware manufacturer will be programming FT2232 EEPROMs with custom USB IDs, specifically with the intent that these IDs will be recognized by the ftdi_sio driver with the ftdi_jtag_quirk applied. Signed-off-by: Mychaela N. Falconia [johan: insert in PID order and drop unused define] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold

Merge 5.9-rc5 into usb-next

2020-09-14T08:10:55Z

We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman

USB: serial: option: support dynamic Quectel USB compositions

2020-08-31T06:37:17Z

The USB composition, defining the set of exported functions, is dynamic in newer Quectel modems. Default functions can be disabled and alternative functions can be enabled instead. The alternatives includes class functions using interface pairs, which should be handled by the respective class drivers. Active interfaces are numbered consecutively, so static blacklisting based on interface numbers will fail when the composition changes. An example of such an error, where the option driver has bound to the CDC ECM data interface, preventing cdc_ether from handling this function: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0125 Rev= 3.18 S: Manufacturer=Quectel S: Product=EC25-AF C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 4 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I:* If#= 5 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=option I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=option E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Another device with the same id gets correct drivers, since the interface of the network function happens to be blacklisted by option: T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0125 Rev= 3.18 S: Manufacturer=Android S: Product=Android C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Change rules for EC21, EC25, BG96 and EG95 to match vendor specific serial functions only, to prevent binding to class functions. Require 2 endpoints on ff/ff/ff functions, avoiding the 3 endpoint QMI/RMNET network functions. Cc: AceLan Kao Cc: Sebastian Sjoholm Cc: Dan Williams Cc: stable@vger.kernel.org Signed-off-by: Bjørn Mork Signed-off-by: Johan Hovold