wireguard-linux/drivers/usb/storage/uas.c, branch jd/unified-crypt-queue

usb: uas: fix a plug & unplug racing

2020-02-10T19:08:30Z

When a uas disk is plugged into an external hub, uas_probe() will be called by the hub thread to do the probe. It will first create a SCSI host and then do the scan for this host. During the scan, it will probe the LUN using SCSI INQUERY command which will be packed in the URB and submitted to uas disk. There might be a chance that this external hub with uas disk attached is unplugged during the scan. In this case, uas driver will fail to submit the URB (due to the NOTATTACHED state of uas device) and try to put this SCSI command back to request queue waiting for next chance to run. In normal case, this cycle will terminate when hub thread gets disconnection event and calls into uas_disconnect() accordingly. But in this case, uas_disconnect() will not be called because hub thread of external hub gets stuck waiting for the completion of this SCSI command. A deadlock happened. In this fix, uas will call scsi_scan_host() asynchronously to avoid the blocking of hub thread. Signed-off-by: EJ Hsu Acked-by: Oliver Neukum Cc: stable Link: https://lore.kernel.org/r/20200130092506.102760-1-ejh@nvidia.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2019-12-02T21:37:02Z

Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: aacraid, ufs, zfcp, NCR5380, lpfc, qla2xxx, smartpqi, hisi_sas, target, mpt3sas, pm80xx plus a whole load of minor updates and fixes. The major core changes are Al Viro's reworking of sg's handling of copy to/from user, Ming Lei's removal of the host busy counter to avoid contention in the multiqueue case and Damien Le Moal's fixing of residual tracking across error handling" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (251 commits) scsi: bnx2fc: timeout calculation invalid for bnx2fc_eh_abort() scsi: target: core: Fix a pr_debug() argument scsi: iscsi: Don't send data to unbound connection scsi: target: iscsi: Wait for all commands to finish before freeing a session scsi: target: core: Release SPC-2 reservations when closing a session scsi: target: core: Document target_cmd_size_check() scsi: bnx2i: fix potential use after free Revert "scsi: qla2xxx: Fix memory leak when sending I/O fails" scsi: NCR5380: Add disconnect_mask module parameter scsi: NCR5380: Unconditionally clear ICR after do_abort() scsi: NCR5380: Call scsi_set_resid() on command completion scsi: scsi_debug: num_tgts must be >= 0 scsi: lpfc: use hdwq assigned cpu for allocation scsi: arcmsr: fix indentation issues scsi: qla4xxx: fix double free bug scsi: pm80xx: Modified the logic to collect fatal dump scsi: pm80xx: Tie the interrupt name to the module instance scsi: pm80xx: Controller fatal error through sysfs scsi: pm80xx: Do not request 12G sas speeds scsi: pm80xx: Cleanup command when a reset times out ...

USB: uas: heed CAPACITY_HEURISTICS

2019-11-18T11:41:55Z

There is no need to ignore this flag. We should be as close to storage in that regard as makes sense, so honor flags whose cost is tiny. Signed-off-by: Oliver Neukum Cc: stable Link: https://lore.kernel.org/r/20191114112758.32747-3-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman

USB: uas: honor flag to avoid CAPACITY16

2019-11-18T11:41:55Z

Copy the support over from usb-storage to get feature parity Signed-off-by: Oliver Neukum Cc: stable Link: https://lore.kernel.org/r/20191114112758.32747-2-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman

scsi: core: Clean up SG_NONE

2019-11-13T03:21:35Z

Remove SG_NONE and a related misleading comment. Update documentation. This patch does not affect behaviour as zero initialization is redundant. Cc: Jonathan Corbet Cc: Bartlomiej Zolnierkiewicz Cc: Jens Axboe Cc: Viresh Kumar Cc: Oliver Neukum Cc: Alan Stern Cc: Greg Kroah-Hartman Cc: usb-storage@lists.one-eyed-alien.net Link: https://lore.kernel.org/r/b4779b7a6563f6bd8d259ee457871c1c463c420e.1572656814.git.fthain@telegraphics.com.au Signed-off-by: Finn Thain Signed-off-by: Martin K. Petersen

UAS: Revert commit 3ae62a42090f ("UAS: fix alignment of scatter/gather segments")

2019-10-28T16:53:39Z

Commit 3ae62a42090f ("UAS: fix alignment of scatter/gather segments"), copying a similar commit for usb-storage, attempted to solve a problem involving scatter-gather I/O and USB/IP by setting the virt_boundary_mask for mass-storage devices. However, it now turns out that the analogous change in usb-storage interacted badly with commit 09324d32d2a0 ("block: force an unlimited segment size on queues with a virt boundary"), which was added later. A typical error message is: ehci-pci 0000:00:13.2: swiotlb buffer is full (sz: 327680 bytes), total 32768 (slots), used 97 (slots) There is no longer any reason to keep the virt_boundary_mask setting in the uas driver. It was needed in the first place only for handling devices with a block size smaller than the maxpacket size and where the host controller was not capable of fully general scatter-gather operation (that is, able to merge two SG segments into a single USB packet). But: High-speed or slower connections never use a bulk maxpacket value larger than 512; The SCSI layer does not handle block devices with a block size smaller than 512 bytes; All the host controllers capable of SuperSpeed operation can handle fully general SG; Since commit ea44d190764b ("usbip: Implement SG support to vhci-hcd and stub driver") was merged, the USB/IP driver can also handle SG. Therefore all supported device/controller combinations should be okay with no need for any special virt_boundary_mask. So in order to head off potential problems similar to those affecting usb-storage, this patch reverts commit 3ae62a42090f. Signed-off-by: Alan Stern CC: Oliver Neukum CC: Acked-by: Christoph Hellwig Fixes: 3ae62a42090f ("UAS: fix alignment of scatter/gather segments") Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1910231132470.1878-100000@iolanthe.rowland.org Signed-off-by: Greg Kroah-Hartman

usb-storage: export symbols in USB_STORAGE namespace

2019-09-10T08:30:57Z

Modules using these symbols are required to explicitly import the namespace. This patch was generated with the following steps and serves as a reference to use the symbol namespace feature: 1) Define DEFAULT_SYMBOL_NAMESPACE in the corresponding Makefile 2) make (see warnings during modpost about missing imports) 3) make nsdeps Instead of a DEFAULT_SYMBOL_NAMESPACE definition, the EXPORT_SYMBOL_NS variants can be used to explicitly specify the namespace. The advantage of the method used here is that newly added symbols are automatically exported and existing ones are exported without touching their respective EXPORT_SYMBOL macro expansion. Reviewed-by: Greg Kroah-Hartman Signed-off-by: Matthias Maennich Signed-off-by: Jessica Yu

UAS: fix alignment of scatter/gather segments

2019-04-30T15:51:42Z

This is the UAS version of 747668dbc061b3e62bc1982767a3a1f9815fcf0e usb-storage: Set virt_boundary_mask to avoid SG overflows We are not as likely to be vulnerable as storage, as it is unlikelier that UAS is run over a controller without native support for SG, but the issue exists. The issue has been existing since the inception of the driver. Fixes: 115bb1ffa54c ("USB: Add UAS driver") Signed-off-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman

scsi: uas: Use scsi_[gs]et_resid() where appropriate

2019-02-12T16:13:41Z

This patch does not change any functionality. Cc: Oliver Neukum Signed-off-by: Bart Van Assche Acked-by: Oliver Neukum Reviewed-by: Christoph Hellwig Signed-off-by: Martin K. Petersen

scsi: remove bidirectional command support

2019-02-06T02:29:21Z

No real need for bidi support once the OSD code is gone. Signed-off-by: Christoph Hellwig Reviewed-by: Jens Axboe Signed-off-by: Martin K. Petersen