wireguard-linux/drivers/vdpa, branch jd/orphan-parallel

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

2020-10-23T18:00:57Z

Pull virtio updates from Michael Tsirkin: "vhost, vdpa, and virtio cleanups and fixes A very quiet cycle, no new features" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: MAINTAINERS: add URL for virtio-mem vhost_vdpa: remove unnecessary spin_lock in vhost_vring_call vringh: fix __vringh_iov() when riov and wiov are different vdpa/mlx5: Setup driver only if VIRTIO_CONFIG_S_DRIVER_OK s390: virtio: PV needs VIRTIO I/O device protection virtio: let arch advertise guest's memory access restrictions vhost_vdpa: Fix duplicate included kernel.h vhost: reduce stack usage in log_used virtio-mem: Constify mem_id_table virtio_input: Constify id_table virtio-balloon: Constify id_table vdpa/mlx5: Fix failure to bring link up vdpa/mlx5: Make use of a specific 16 bit endianness API

vdpa/mlx5: Setup driver only if VIRTIO_CONFIG_S_DRIVER_OK

2020-10-21T14:36:54Z

set_map() is used by mlx5 vdpa to create a memory region based on the address map passed by the iotlb argument. If we get successive calls, we will destroy the current memory region and build another one based on the new address mapping. We also need to setup the hardware resources since they depend on the memory region. If these calls happen before DRIVER_OK, It means that driver VQs may also not been setup and we may not create them yet. In this case we want to avoid setting up the other resources and defer this till we get DRIVER OK. Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Signed-off-by: Eli Cohen Link: https://lore.kernel.org/r/20200908123346.GA169007@mtl-vdi-166.wap.labs.mlnx Signed-off-by: Michael S. Tsirkin

vdpa/mlx5: Fix failure to bring link up

2020-10-21T14:34:07Z

Set VIRTIO_NET_S_LINK_UP in config status to allow the get the bring the net device's link up. Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Signed-off-by: Eli Cohen Link: https://lore.kernel.org/r/20200917121540.GA98184@mtl-vdi-166.wap.labs.mlnx Signed-off-by: Michael S. Tsirkin Acked-by: Jason Wang

vdpa/mlx5: Make use of a specific 16 bit endianness API

2020-10-21T14:34:06Z

Introduce a dedicated function to be used for setting 16 bit fields per virio endianness requirements and use it to set the mtu field. Signed-off-by: Eli Cohen Link: https://lore.kernel.org/r/20200917121425.GA98139@mtl-vdi-166.wap.labs.mlnx Signed-off-by: Michael S. Tsirkin Acked-by: Jason Wang

Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping

2020-10-15T21:43:29Z

Pull dma-mapping updates from Christoph Hellwig: - rework the non-coherent DMA allocator - move private definitions out of - lower CMA_ALIGNMENT (Paul Cercueil) - remove the omap1 dma address translation in favor of the common code - make dma-direct aware of multiple dma offset ranges (Jim Quinlan) - support per-node DMA CMA areas (Barry Song) - increase the default seg boundary limit (Nicolin Chen) - misc fixes (Robin Murphy, Thomas Tai, Xu Wang) - various cleanups * tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits) ARM/ixp4xx: add a missing include of dma-map-ops.h dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling dma-direct: factor out a dma_direct_alloc_from_pool helper dma-direct check for highmem pages in dma_direct_alloc_pages dma-mapping: merge into dma-mapping: move large parts of to kernel/dma dma-mapping: move dma-debug.h to kernel/dma/ dma-mapping: remove dma-mapping: merge into dma-contiguous: remove dma_contiguous_set_default dma-contiguous: remove dev_set_cma_area dma-contiguous: remove dma_declare_contiguous dma-mapping: split cma: decrease CMA_ALIGNMENT lower limit to 2 firewire-ohci: use dma_alloc_pages dma-iommu: implement ->alloc_noncoherent dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods dma-mapping: add a new dma_alloc_pages API dma-mapping: remove dma_cache_sync 53c700: convert to dma_alloc_noncoherent ...

vdpa/mlx5: Fix dependency on MLX5_CORE

2020-10-08T20:02:00Z

Remove propmt for selecting MLX5_VDPA by the user and modify MLX5_VDPA_NET to select MLX5_VDPA. Also modify MLX5_VDPA_NET to depend on mlx5_core. This fixes an issue where configuration sets 'y' for MLX5_VDPA_NET while MLX5_CORE is compiled as a module causing link errors. Reported-by: kernel test robot Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 device")s Signed-off-by: Eli Cohen Link: https://lore.kernel.org/r/20201007064011.GA50074@mtl-vdi-166.wap.labs.mlnx Signed-off-by: Michael S. Tsirkin

vdpa/mlx5: should keep avail_index despite device status

2020-10-08T20:02:00Z

A VM with mlx5 vDPA has below warnings while being reset: vhost VQ 0 ring restore failed: -1: Resource temporarily unavailable (11) vhost VQ 1 ring restore failed: -1: Resource temporarily unavailable (11) We should allow userspace emulating the virtio device be able to get to vq's avail_index, regardless of vDPA device status. Save the index that was last seen when virtq was stopped, so that userspace doesn't complain. Signed-off-by: Si-Wei Liu Link: https://lore.kernel.org/r/1601583511-15138-1-git-send-email-si-wei.liu@oracle.com Signed-off-by: Michael S. Tsirkin Acked-by: Eli Cohen

dma-mapping: split

2020-10-06T05:07:03Z

Split out all the bits that are purely for dma_map_ops implementations and related code into a new header so that they don't get pulled into all the drivers. That also means the architecture specific is not pulled in by any more, which leads to a missing includes that were pulled in by the x86 or arm versions in a few not overly portable drivers. Signed-off-by: Christoph Hellwig

vdpa/mlx5: Avoid warnings about shifts on 32-bit platforms

2020-08-26T12:13:59Z

Clang warns several times when building for 32-bit ARM along the lines of: drivers/vdpa/mlx5/net/mlx5_vnet.c:1462:31: warning: shift count >= width of type [-Wshift-count-overflow] ndev->mvdev.mlx_features |= BIT(VIRTIO_F_VERSION_1); ^~~~~~~~~~~~~~~~~~~~~~~ This is related to the BIT macro, which uses an unsigned long literal, which is 32-bit on ARM so having a shift equal to or larger than 32 will cause this warning, such as the above, where VIRTIO_F_VERSION_1 is 32. To avoid this, use BIT_ULL, which will be an unsigned long long. This matches the size of the features field throughout this driver, which is u64 so there should be no functional change. Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Link: https://github.com/ClangBuiltLinux/linux/issues/1140 Signed-off-by: Nathan Chancellor Link: https://lore.kernel.org/r/20200821225018.940798-1-natechancellor@gmail.com Signed-off-by: Michael S. Tsirkin Reported-by: Randy Dunlap Acked-by: Randy Dunlap # build-tested Acked-by: Eli Cohen

vdpa: ifcvf: free config irq in ifcvf_free_irq()

2020-08-26T12:13:59Z

We don't free config irq in ifcvf_free_irq() which will trigger a BUG() in pci core since we try to free the vectors that has an action. Fixing this by recording the config irq in ifcvf_hw structure and free it in ifcvf_free_irq(). Fixes: e7991f376a4d ("ifcvf: implement config interrupt in IFCVF") Cc: Zhu Lingshan Signed-off-by: Jason Wang Link: https://lore.kernel.org/r/20200723091254.20617-2-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin Reviewed-by: Zhu Lingshan Fixes: e7991f376a4d ("ifcvf: implement config interrupt in IFCVF") Cc: Zhu Lingshan <lingshan.zhu@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com>