wireguard-linux/drivers/video, branch jd/orphan-parallel

Merge branch 'parisc-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux

2020-10-15T22:42:55Z

Pull parisc updates from Helge Deller: - Added fw_cfg support for parisc on qemu - Added font support in sti text console driver for byte- and word-mode ROMs - Switch to more fine grained lws locks and improve spinlock handling - Add ioread64_hi_lo() and iowrite64_hi_lo() to avoid 0-day linking errors - Mark pointers volatile in __xchg8(), __xchg32() and __xchg64() to help compiler - Header file cleanups, mostly removal of unused HP-UX compat defines - Drop one bit from our O_NONBLOCK define to become now 000200000 - Add MAP_UNINITIALIZED define to avoid userspace compile errors - Drop CONFIG_IDE from defconfigs - Speed up synchronize_caches() on UP machines - Rewrite tlb flush threshold calculation - Comment fixes and cleanups * 'parisc-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc/sticon: Add user font support parisc/sticon: Always register sticon console driver parisc: Add MAP_UNINITIALIZED define parisc: Improve spinlock handling parisc: Install vmlinuz instead of zImage file parisc: Rewrite tlb flush threshold calculation parisc: Switch to more fine grained lws locks parisc: Mark pointers volatile in __xchg8(), __xchg32() and __xchg64() parisc: Fix comments and enable interrupts later parisc: Add alternative patching to synchronize_caches define parisc: Add ioread64_hi_lo() and iowrite64_hi_lo() parisc: disable CONFIG_IDE in defconfigs parisc: Drop useless comments in uapi/asm/signal.h parisc: Define O_NONBLOCK to become 000200000 parisc: Drop HP-UX specific fcntl and signal flags parisc: Avoid external interrupts when IPI finishes parisc: Add qemu fw_cfg interface fw_cfg: Add support for parisc architecture

Merge tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm

2020-10-15T17:46:16Z

Pull drm updates from Dave Airlie: "Not a major amount of change, the i915 trees got split into display and gt trees to better facilitate higher level review, and there's a major refactoring of i915 GEM locking to use more core kernel concepts (like ww-mutexes). msm gets per-process pagetables, older AMD SI cards get DC support, nouveau got a bump in displayport support with common code extraction from i915. Outside of drm this contains a couple of patches for hexint moduleparams which you've acked, and a virtio common code tree that you should also get via it's regular path. New driver: - Cadence MHDP8546 DisplayPort bridge driver core: - cross-driver scatterlist cleanups - devm_drm conversions - remove drm_dev_init - devm_drm_dev_alloc conversion ttm: - lots of refactoring and cleanups bridges: - chained bridge support in more drivers panel: - misc new panels scheduler: - cleanup priority levels displayport: - refactor i915 code into helpers for nouveau i915: - split into display and GT trees - WW locking refactoring in GEM - execbuf2 extension mechanism - syncobj timeline support - GEN 12 HOBL display powersaving - Rocket Lake display additions - Disable FBC on Tigerlake - Tigerlake Type-C + DP improvements - Hotplug interrupt refactoring amdgpu: - Sienna Cichlid updates - Navy Flounder updates - DCE6 (SI) support for DC - Plane rotation enabled - TMZ state info ioctl - PCIe DPC recovery support - DC interrupt handling refactor - OLED panel fixes amdkfd: - add SMI events for thermal throttling - SMI interface events ioctl update - process eviction counters radeon: - move to dma_ for allocations - expose sclk via sysfs msm: - DSI support for sm8150/sm8250 - per-process GPU pagetable support - Displayport support mediatek: - move HDMI phy driver to PHY - convert mtk-dpi to bridge API - disable mt2701 tmds tegra: - bridge support exynos: - misc cleanups vc4: - dual display cleanups ast: - cleanups gma500: - conversion to GPIOd API hisilicon: - misc reworks ingenic: - clock handling and format improvements mcde: - DSI support mgag200: - desktop g200 support mxsfb: - i.MX7 + i.MX8M - alpha plane support panfrost: - devfreq support - amlogic SoC support ps8640: - EDID from eDP retrieval tidss: - AM65xx YUV workaround virtio: - virtio-gpu exported resources rcar-du: - R8A7742, R8A774E1 and R8A77961 support - YUV planar format fixes - non-visible plane handling - VSP device reference count fix - Kconfig fix to avoid displaying disabled options in .config" * tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm: (1494 commits) drm/ingenic: Fix bad revert drm/amdgpu: Fix invalid number of character '{' in amdgpu_acpi_init drm/amdgpu: Remove warning for virtual_display drm/amdgpu: kfd_initialized can be static drm/amd/pm: setup APU dpm clock table in SMU HW initialization drm/amdgpu: prevent spurious warning drm/amdgpu/swsmu: fix ARC build errors drm/amd/display: Fix OPTC_DATA_FORMAT programming drm/amd/display: Don't allow pstate if no support in blank drm/panfrost: increase readl_relaxed_poll_timeout values MAINTAINERS: Update entry for st7703 driver after the rename Revert "gpu/drm: ingenic: Add option to mmap GEM buffers cached" drm/amd/display: HDMI remote sink need mode validation for Linux drm/amd/display: Change to correct unit on audio rate drm/amd/display: Avoid set zero in the requested clk drm/amdgpu: align frag_end to covered address space drm/amdgpu: fix NULL pointer dereference for Renoir drm/vmwgfx: fix regression in thp code due to ttm init refactor. drm/amdgpu/swsmu: add interrupt work handler for smu11 parts drm/amdgpu/swsmu: add interrupt work function ...

parisc/sticon: Add user font support

2020-10-15T06:12:59Z

This is a major rework of the sticon (parisc text console) driver in order to support user font support. Usually one want to use the stifb (parisc framebuffer driver) which is based on fbcon and does support fonts and colors, but some old machines (e.g. HP 730 workstations) don't provide a supported stifb graphic card, and for those user fonts are preferred. This patch drops unused code for software cursor and scrollback, enhances the debug output and adds better documentation. The code was tested on various machines with byte-mode and word-mode graphic cards on GSC- and PCI-busses. Signed-off-by: Helge Deller

parisc/sticon: Always register sticon console driver

2020-10-15T06:10:39Z

If the ROM provides functional STI routines, always register the sticon driver, even if the serial console was choosen as boot device. Additionally, in that case, do not make the sticon driver the default output console device. Signed-off-by: Helge Deller

Merge tag 'tty-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2020-10-14T23:05:52Z

Pull tty/serial updates from Greg KH: "Here is the big set of tty and serial driver patches for 5.10-rc1. Lots of little things in here, including: - tasklet_setup api conversions - sysrq support for capital letters - vt and vc cleanups and unwinding the mess some more - serial driver updates and minor tweaks - new device ids - rs485 support for some drivers - serial binding documentation updates - lots of small serial driver changes for reported issues All have been in linux-next for a while with no reported issues" * tag 'tty-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits) serial: mcf: add sysrq capability serial: fsl_lpuart: add sysrq support when using dma fbcon: remove no-op fbcon_set_origin() tty/sysrq: Extend the sysrq_key_table to cover capital letters serial: max310x: rework RX interrupt handling serial: 8250_dw: Fix clk-notifier/port suspend deadlock serial: 8250: Skip uninitialized TTY port baud rate update serial: 8250: Discard RTS/DTS setting from clock update method tty: serial: imx: disable TXDC IRQ in imx_uart_shutdown() to avoid IRQ storm serial: 8250_fsl: Fix TX interrupt handling condition serial: pl011: Fix lockdep splat when handling magic-sysrq interrupt tty: serial: fsl_lpuart: fix lpuart32_poll_get_char tty: serial: lpuart: fix lpuart32_write usage serial: qcom_geni_serial: To correct QUP Version detection logic serial: mvebu-uart: fix unused variable warning vt_ioctl: make VT_RESIZEX behave like VT_RESIZE serial: mvebu-uart: simplify the return expression of mvebu_uart_probe() tty: serial: imx: fix link error with CONFIG_SERIAL_CORE_CONSOLE=n tty: hvc: fix link error with CONFIG_SERIAL_CORE_CONSOLE=n pch_uart: drop double zeroing ...

Merge tag 'backlight-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight

2020-10-14T22:59:42Z

Pull backlight updates from Lee Jones: "New Drivers: - Add support for KTD253 Fix-ups: - Add Device Tree documentation; common, kinetic,ktd253 - Use correct header(s); tosa_lcd, tosa_bl Bug Fixes: - Fix refcount imbalance; sky81452-backlight" * tag 'backlight-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: tosa_bl: Include the right header backlight: tosa_lcd: Include the right header backlight: Add Kinetic KTD253 backlight driver dt-bindings: backlight: Add Kinetic KTD253 bindings dt-bindings: backlight: Add some common backlight properties backlight: sky81452-backlight: Fix refcount imbalance on error

Merge tag 'drm-misc-fixes-2020-10-01' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

2020-10-06T02:38:28Z

drm-misc-fixes for v5.9: - Small doc fix. - Re-add FB_ARMCLCD for android. - Fix global-out-of-bounds read in fbcon_get_font(). Signed-off-by: Dave Airlie From: Maarten Lankhorst Link: https://patchwork.freedesktop.org/patch/msgid/8585daa2-fcbc-3924-ac4f-e7b5668808e0@linux.intel.com

fbcon: remove no-op fbcon_set_origin()

2020-10-02T13:50:19Z

We don't need to call vc->vc_sw->con_set_origin() from set_origin() if it is no-op. Signed-off-by: Tetsuo Handa Link: https://lore.kernel.org/r/20200915000019.3422-3-penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Greg Kroah-Hartman

Partially revert "video: fbdev: amba-clcd: Retire elder CLCD driver"

2020-09-30T14:37:39Z

Also partially revert the follow-up change "drm: pl111: Absorb the external register header". This reverts the parts of commits 7e4e589db76a3cf4c1f534eb5a09cc6422766b93 and 0fb8125635e8eb5483fb095f98dcf0651206a7b8 that touch paths outside of drivers/gpu/drm/pl111. The fbdev driver is used by Android's FVP configuration. Using the DRM driver together with DRM's fbdev emulation results in a failure to boot Android. The root cause is that Android's generic fbdev userspace driver relies on the ability to set the pixel format via FBIOPUT_VSCREENINFO, which is not supported by fbdev emulation. There have been other less critical behavioral differences identified between the fbdev driver and the DRM driver with fbdev emulation. The DRM driver exposes different values for the panel's width, height and refresh rate, and the DRM driver fails a FBIOPUT_VSCREENINFO syscall with yres_virtual greater than the maximum supported value instead of letting the syscall succeed and setting yres_virtual based on yres. Signed-off-by: Peter Collingbourne Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20200929195344.2219796-1-pcc@google.com

fbcon: Fix global-out-of-bounds read in fbcon_get_font()

2020-09-25T08:29:22Z

fbcon_get_font() is reading out-of-bounds. A malicious user may resize `vc->vc_font.height` to a large value, causing fbcon_get_font() to read out of `fontdata`. fbcon_get_font() handles both built-in and user-provided fonts. Fortunately, recently we have added FONT_EXTRA_WORDS support for built-in fonts, so fix it by adding range checks using FNTSIZE(). This patch depends on patch "fbdev, newport_con: Move FONT_EXTRA_WORDS macros into linux/font.h", and patch "Fonts: Support FONT_EXTRA_WORDS macros for built-in fonts". Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+29d4ed7f3bdedf2aa2fd@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=08b8be45afea11888776f897895aef9ad1c3ecfd Signed-off-by: Peilin Ye Reviewed-by: Greg Kroah-Hartman Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/b34544687a1a09d6de630659eb7a773f4953238b.1600953813.git.yepeilin.cs@gmail.com