wireguard-linux/drivers, branch update-toolchain

nfc: pn533: Add poll mod list filling check

2024-08-29T10:08:44Z

In case of im_protocols value is 1 and tm_protocols value is 0 this combination successfully passes the check 'if (!im_protocols && !tm_protocols)' in the nfc_start_poll(). But then after pn533_poll_create_mod_list() call in pn533_start_poll() poll mod list will remain empty and dev->poll_mod_count will remain 0 which lead to division by zero. Normally no im protocol has value 1 in the mask, so this combination is not expected by driver. But these protocol values actually come from userspace via Netlink interface (NFC_CMD_START_POLL operation). So a broken or malicious program may pass a message containing a "bad" combination of protocol parameter values so that dev->poll_mod_count is not incremented inside pn533_poll_create_mod_list(), thus leading to division by zero. Call trace looks like: nfc_genl_start_poll() nfc_start_poll() ->start_poll() pn533_start_poll() Add poll mod list filling check. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: dfccd0f58044 ("NFC: pn533: Add some polling entropy") Signed-off-by: Aleksandr Mishin Acked-by: Krzysztof Kozlowski Link: https://patch.msgid.link/20240827084822.18785-1-amishin@t-argos.ru Signed-off-by: Paolo Abeni

Merge tag 'wireless-2024-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless

2024-08-28T23:54:45Z

Johannes Berg says: ==================== Regressions: * wfx: fix for open network connection * iwlwifi: fix for hibernate (due to fast resume feature) * iwlwifi: fix for a few warnings that were recently added (had previously been messages not warnings) Previously broken: * mwifiex: fix static structures used for per-device data * iwlwifi: some harmless FW related messages were tagged too high priority * iwlwifi: scan buffers weren't checked correctly * mac80211: SKB leak on beacon error path * iwlwifi: fix ACPI table interop with certain BIOSes * iwlwifi: fix locking for link selection * mac80211: fix SSID comparison in beacon validation * tag 'wireless-2024-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: iwlwifi: clear trans->state earlier upon error wifi: wfx: repair open network AP mode wifi: mac80211: free skb on error path in ieee80211_beacon_get_ap() wifi: iwlwifi: mvm: don't wait for tx queues if firmware is dead wifi: iwlwifi: mvm: allow 6 GHz channels in MLO scan wifi: iwlwifi: mvm: pause TCM when the firmware is stopped wifi: iwlwifi: fw: fix wgds rev 3 exact size wifi: iwlwifi: mvm: take the mutex before running link selection wifi: iwlwifi: mvm: fix iwl_mvm_max_scan_ie_fw_cmd_room() wifi: iwlwifi: mvm: fix iwl_mvm_scan_fits() calculation wifi: iwlwifi: lower message level for FW buffer destination wifi: iwlwifi: mvm: fix hibernation wifi: mac80211: fix beacon SSID mismatch handling wifi: mwifiex: duplicate static structs used in driver instances ==================== Link: https://patch.msgid.link/20240828100151.23662-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski

gtp: fix a potential NULL pointer dereference

2024-08-27T21:19:40Z

When sockfd_lookup() fails, gtp_encap_enable_socket() returns a NULL pointer, but its callers only check for error pointers thus miss the NULL pointer case. Fix it by returning an error pointer with the error code carried from sockfd_lookup(). (I found this bug during code inspection.) Fixes: 1e3a3abd8b28 ("gtp: make GTP sockets in gtp_newlink optional") Cc: Andreas Schultz Cc: Harald Welte Signed-off-by: Cong Wang Reviewed-by: Simon Horman Reviewed-by: Pablo Neira Ayuso Link: https://patch.msgid.link/20240825191638.146748-1-xiyou.wangcong@gmail.com Signed-off-by: Jakub Kicinski

bonding: change ipsec_lock from spin lock to mutex

2024-08-27T20:11:37Z

In the cited commit, bond->ipsec_lock is added to protect ipsec_list, hence xdo_dev_state_add and xdo_dev_state_delete are called inside this lock. As ipsec_lock is a spin lock and such xfrmdev ops may sleep, "scheduling while atomic" will be triggered when changing bond's active slave. [ 101.055189] BUG: scheduling while atomic: bash/902/0x00000200 [ 101.055726] Modules linked in: [ 101.058211] CPU: 3 PID: 902 Comm: bash Not tainted 6.9.0-rc4+ #1 [ 101.058760] Hardware name: [ 101.059434] Call Trace: [ 101.059436] [ 101.060873] dump_stack_lvl+0x51/0x60 [ 101.061275] __schedule_bug+0x4e/0x60 [ 101.061682] __schedule+0x612/0x7c0 [ 101.062078] ? __mod_timer+0x25c/0x370 [ 101.062486] schedule+0x25/0xd0 [ 101.062845] schedule_timeout+0x77/0xf0 [ 101.063265] ? asm_common_interrupt+0x22/0x40 [ 101.063724] ? __bpf_trace_itimer_state+0x10/0x10 [ 101.064215] __wait_for_common+0x87/0x190 [ 101.064648] ? usleep_range_state+0x90/0x90 [ 101.065091] cmd_exec+0x437/0xb20 [mlx5_core] [ 101.065569] mlx5_cmd_do+0x1e/0x40 [mlx5_core] [ 101.066051] mlx5_cmd_exec+0x18/0x30 [mlx5_core] [ 101.066552] mlx5_crypto_create_dek_key+0xea/0x120 [mlx5_core] [ 101.067163] ? bonding_sysfs_store_option+0x4d/0x80 [bonding] [ 101.067738] ? kmalloc_trace+0x4d/0x350 [ 101.068156] mlx5_ipsec_create_sa_ctx+0x33/0x100 [mlx5_core] [ 101.068747] mlx5e_xfrm_add_state+0x47b/0xaa0 [mlx5_core] [ 101.069312] bond_change_active_slave+0x392/0x900 [bonding] [ 101.069868] bond_option_active_slave_set+0x1c2/0x240 [bonding] [ 101.070454] __bond_opt_set+0xa6/0x430 [bonding] [ 101.070935] __bond_opt_set_notify+0x2f/0x90 [bonding] [ 101.071453] bond_opt_tryset_rtnl+0x72/0xb0 [bonding] [ 101.071965] bonding_sysfs_store_option+0x4d/0x80 [bonding] [ 101.072567] kernfs_fop_write_iter+0x10c/0x1a0 [ 101.073033] vfs_write+0x2d8/0x400 [ 101.073416] ? alloc_fd+0x48/0x180 [ 101.073798] ksys_write+0x5f/0xe0 [ 101.074175] do_syscall_64+0x52/0x110 [ 101.074576] entry_SYSCALL_64_after_hwframe+0x4b/0x53 As bond_ipsec_add_sa_all and bond_ipsec_del_sa_all are only called from bond_change_active_slave, which requires holding the RTNL lock. And bond_ipsec_add_sa and bond_ipsec_del_sa are xfrm state xdo_dev_state_add and xdo_dev_state_delete APIs, which are in user context. So ipsec_lock doesn't have to be spin lock, change it to mutex, and thus the above issue can be resolved. Fixes: 9a5605505d9c ("bonding: Add struct bond_ipesc to manage SA") Signed-off-by: Jianbo Liu Signed-off-by: Tariq Toukan Reviewed-by: Hangbin Liu Acked-by: Jay Vosburgh Link: https://patch.msgid.link/20240823031056.110999-4-jianbol@nvidia.com Signed-off-by: Jakub Kicinski

bonding: extract the use of real_device into local variable

2024-08-27T20:11:37Z

Add a local variable for slave->dev, to prepare for the lock change in the next patch. There is no functionality change. Fixes: 9a5605505d9c ("bonding: Add struct bond_ipesc to manage SA") Signed-off-by: Jianbo Liu Reviewed-by: Cosmin Ratiu Signed-off-by: Tariq Toukan Reviewed-by: Hangbin Liu Acked-by: Jay Vosburgh Link: https://patch.msgid.link/20240823031056.110999-3-jianbol@nvidia.com Signed-off-by: Jakub Kicinski

bonding: implement xdo_dev_state_free and call it after deletion

2024-08-27T20:11:37Z

Add this implementation for bonding, so hardware resources can be freed from the active slave after xfrm state is deleted. The netdev used to invoke xdo_dev_state_free callback, is saved in the xfrm state (xs->xso.real_dev), which is also the bond's active slave. To prevent it from being freed, acquire netdev reference before leaving RCU read-side critical section, and release it after callback is done. And call it when deleting all SAs from old active real interface while switching current active slave. Fixes: 9a5605505d9c ("bonding: Add struct bond_ipesc to manage SA") Signed-off-by: Jianbo Liu Signed-off-by: Tariq Toukan Reviewed-by: Hangbin Liu Acked-by: Jay Vosburgh Link: https://patch.msgid.link/20240823031056.110999-2-jianbol@nvidia.com Signed-off-by: Jakub Kicinski

ionic: Prevent tx_timeout due to frequent doorbell ringing

2024-08-27T11:22:42Z

With recent work to the doorbell workaround code a small hole was introduced that could cause a tx_timeout. This happens if the rx dbell_deadline goes beyond the netdev watchdog timeout set by the driver (i.e. 2 seconds). Fix this by changing the netdev watchdog timeout to 5 seconds and reduce the max rx dbell_deadline to 4 seconds. The test that can reproduce the issue being fixed is a multi-queue send test via pktgen with the "burst" setting to 1. This causes the queue's doorbell to be rung on every packet sent to the driver, which may result in the device missing doorbells due to the high doorbell rate. Cc: stable@vger.kernel.org Fixes: 4ded136c78f8 ("ionic: add work item for missed-doorbell check") Signed-off-by: Brett Creeley Reviewed-by: Shannon Nelson Link: https://patch.msgid.link/20240822192557.9089-1-brett.creeley@amd.com Signed-off-by: Paolo Abeni

wifi: iwlwifi: clear trans->state earlier upon error

2024-08-27T07:54:24Z

When the firmware crashes, we first told the op_mode and only then, changed the transport's state. This is a problem if the op_mode's nic_error() handler needs to send a host command: it'll see that the transport's state still reflects that the firmware is alive. Today, this has no consequences since we set the STATUS_FW_ERROR bit and that will prevent sending host commands. iwl_fw_dbg_stop_restart_recording looks at this bit to know not to send a host command for example. To fix the hibernation, we needed to reset the firmware without having an error and checking STATUS_FW_ERROR to see whether the firmware is alive will no longer hold, so this change is necessary as well. Change the flow a bit. Change trans->state before calling the op_mode's nic_error() method and check trans->state instead of STATUS_FW_ERROR. This will keep the current behavior of iwl_fw_dbg_stop_restart_recording upon firmware error, and it'll allow us to call iwl_fw_dbg_stop_restart_recording safely even if STATUS_FW_ERROR is clear, but yet, the firmware is not alive. Signed-off-by: Emmanuel Grumbach Signed-off-by: Miri Korenblit Link: https://patch.msgid.link/20240825191257.9d7427fbdfd7.Ia056ca57029a382c921d6f7b6a6b28fc480f2f22@changeid [I missed this was a dependency for the hibernation fix, changed the commit message a bit accordingly] Signed-off-by: Johannes Berg

wifi: wfx: repair open network AP mode

2024-08-27T07:49:26Z

RSN IE missing in beacon is normal in open networks. Avoid returning -EINVAL in this case. Steps to reproduce: $ cat /etc/wpa_supplicant.conf network={ ssid="testNet" mode=2 key_mgmt=NONE } $ wpa_supplicant -iwlan0 -c /etc/wpa_supplicant.conf nl80211: Beacon set failed: -22 (Invalid argument) Failed to set beacon parameters Interface initialization failed wlan0: interface state UNINITIALIZED->DISABLED wlan0: AP-DISABLED wlan0: Unable to setup interface. Failed to initialize AP interface After the change: $ wpa_supplicant -iwlan0 -c /etc/wpa_supplicant.conf Successfully initialized wpa_supplicant wlan0: interface state UNINITIALIZED->ENABLED wlan0: AP-ENABLED Cc: stable@vger.kernel.org Fixes: fe0a7776d4d1 ("wifi: wfx: fix possible NULL pointer dereference in wfx_set_mfp_ap()") Signed-off-by: Alexander Sverdlin Reviewed-by: Jérôme Pouiller Signed-off-by: Kalle Valo Link: https://patch.msgid.link/20240823131521.3309073-1-alexander.sverdlin@siemens.com

net: ti: icssg-prueth: Fix 10M Link issue on AM64x

2024-08-26T22:20:33Z

Crash is seen on AM64x 10M link when connecting / disconnecting multiple times. The fix for this is to enable quirk_10m_link_issue for AM64x. Fixes: b256e13378a9 ("net: ti: icssg-prueth: Add AM64x icssg support") Signed-off-by: MD Danish Anwar Reviewed-by: Roger Quadros Link: https://patch.msgid.link/20240823120412.1262536-1-danishanwar@ti.com Signed-off-by: Jakub Kicinski