wireguard-linux/fs/kernfs/dir.c, branch jd/unified-crypt-queue

fs/kernfs/dir.c: Clean code by removing always true condition

2020-01-14T15:14:47Z

Previously there was an additional check if variable pos is not null. However, this check happens after entering while loop and only then, which can happen only if pos is not null. Therefore the additional check is redundant and can be removed. Signed-off-by: Mateusz Nosek Acked-by: Tejun Heo Link: https://lore.kernel.org/r/20191230191628.21099-1-mateusznosek0@gmail.com Signed-off-by: Greg Kroah-Hartman

Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2019-11-27T00:02:40Z

Pull locking updates from Ingo Molnar: "The main changes in this cycle were: - A comprehensive rewrite of the robust/PI futex code's exit handling to fix various exit races. (Thomas Gleixner et al) - Rework the generic REFCOUNT_FULL implementation using atomic_fetch_* operations so that the performance impact of the cmpxchg() loops is mitigated for common refcount operations. With these performance improvements the generic implementation of refcount_t should be good enough for everybody - and this got confirmed by performance testing, so remove ARCH_HAS_REFCOUNT and REFCOUNT_FULL entirely, leaving the generic implementation enabled unconditionally. (Will Deacon) - Other misc changes, fixes, cleanups" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) lkdtm: Remove references to CONFIG_REFCOUNT_FULL locking/refcount: Remove unused 'refcount_error_report()' function locking/refcount: Consolidate implementations of refcount_t locking/refcount: Consolidate REFCOUNT_{MAX,SATURATED} definitions locking/refcount: Move saturation warnings out of line locking/refcount: Improve performance of generic REFCOUNT_FULL code locking/refcount: Move the bulk of the REFCOUNT_FULL implementation into the header locking/refcount: Remove unused refcount_*_checked() variants locking/refcount: Ensure integer operands are treated as signed locking/refcount: Define constants for saturation and max refcount values futex: Prevent exit livelock futex: Provide distinct return value when owner is exiting futex: Add mutex around futex exit futex: Provide state handling for exec() as well futex: Sanitize exit state handling futex: Mark the begin of futex exit explicitly futex: Set task::futex_state to DEAD right after handling futex exit futex: Split futex_mm_release() for exit/exec exit/exec: Seperate mm_release() futex: Replace PF_EXITPIDONE with a state ...

kernfs: use 64bit inos if ino_t is 64bit

2019-11-12T16:18:04Z

Each kernfs_node is identified with a 64bit ID. The low 32bit is exposed as ino and the high gen. While this already allows using inos as keys by looking up with wildcard generation number of 0, it's adding unnecessary complications for 64bit ino archs which can directly use kernfs_node IDs as inos to uniquely identify each cgroup instance. This patch exposes IDs directly as inos on 64bit ino archs. The conversion is mostly straight-forward. * 32bit ino archs behave the same as before. 64bit ino archs now use the whole 64bit ID as ino and the generation number is fixed at 1. * 64bit inos still use the same idr allocator which gurantees that the lower 32bits identify the current live instance uniquely and the high 32bits are incremented whenever the low bits wrap. As the upper 32bits are no longer used as gen and we don't wanna start ino allocation with 33rd bit set, the initial value for highbits allocation is changed to 0 on 64bit ino archs. * blktrace exposes two 32bit numbers - (INO,GEN) pair - to identify the issuing cgroup. Userland builds FILEID_INO32_GEN fids from these numbers to look up the cgroups. To remain compatible with the behavior, always output (LOW32,HIGH32) which will be constructed back to the original 64bit ID by __kernfs_fh_to_dentry(). Signed-off-by: Tejun Heo Reviewed-by: Greg Kroah-Hartman Cc: Namhyung Kim

kernfs: combine ino/id lookup functions into kernfs_find_and_get_node_by_id()

2019-11-12T16:18:04Z

kernfs_find_and_get_node_by_ino() looks the kernfs_node matching the specified ino. On top of that, kernfs_get_node_by_id() and kernfs_fh_get_inode() implement full ID matching by testing the rest of ID. On surface, confusingly, the two are slightly different in that the latter uses 0 gen as wildcard while the former doesn't - does it mean that the latter can't uniquely identify inodes w/ 0 gen? In practice, this is a distinction without a difference because generation number starts at 1. There are no actual IDs with 0 gen, so it can always safely used as wildcard. Let's simplify the code by renaming kernfs_find_and_get_node_by_ino() to kernfs_find_and_get_node_by_id(), moving all lookup logics into it, and removing now unnecessary kernfs_get_node_by_id(). Signed-off-by: Tejun Heo Reviewed-by: Greg Kroah-Hartman

kernfs: convert kernfs_node->id from union kernfs_node_id to u64

2019-11-12T16:18:03Z

kernfs_node->id is currently a union kernfs_node_id which represents either a 32bit (ino, gen) pair or u64 value. I can't see much value in the usage of the union - all that's needed is a 64bit ID which the current code is already limited to. Using a union makes the code unnecessarily complicated and prevents using 64bit ino without adding practical benefits. This patch drops union kernfs_node_id and makes kernfs_node->id a u64. ino is stored in the lower 32bits and gen upper. Accessors - kernfs[_id]_ino() and kernfs[_id]_gen() - are added to retrieve the ino and gen. This simplifies ID handling less cumbersome and will allow using 64bit inos on supported archs. This patch doesn't make any functional changes. Signed-off-by: Tejun Heo Reviewed-by: Greg Kroah-Hartman Cc: Namhyung Kim Cc: Jens Axboe Cc: Alexei Starovoitov

kernfs: kernfs_find_and_get_node_by_ino() should only look up activated nodes

2019-11-12T16:18:03Z

kernfs node can be created in two separate steps - allocation and activation. This is used to make kernfs nodes visible only after the internal states attached to the node are fully initialized. kernfs_find_and_get_node_by_id() currently allows lookups of nodes which aren't activated yet and thus can expose nodes are which are still being prepped by kernfs users. Fix it by disallowing lookups of nodes which aren't activated yet. kernfs_find_and_get_node_by_ino() Signed-off-by: Tejun Heo Reviewed-by: Greg Kroah-Hartman Cc: Namhyung Kim

kernfs: use dumber locking for kernfs_find_and_get_node_by_ino()

2019-11-12T16:18:03Z

kernfs_find_and_get_node_by_ino() uses RCU protection. It's currently a bit buggy because it can look up a node which hasn't been activated yet and thus may end up exposing a node that the kernfs user is still prepping. While it can be fixed by pushing it further in the current direction, it's already complicated and isn't clear whether the complexity is justified. The main use of kernfs_find_and_get_node_by_ino() is for exportfs operations. They aren't super hot and all the follow-up operations (e.g. mapping to path) use normal locking anyway. Let's switch to a dumber locking scheme and protect the lookup with kernfs_idr_lock. Signed-off-by: Tejun Heo Reviewed-by: Greg Kroah-Hartman Cc: Namhyung Kim

kernfs: fix ino wrap-around detection

2019-11-12T16:18:03Z

When the 32bit ino wraps around, kernfs increments the generation number to distinguish reused ino instances. The wrap-around detection tests whether the allocated ino is lower than what the cursor but the cursor is pointing to the next ino to allocate so the condition never triggers. Fix it by remembering the last ino and comparing against that. Signed-off-by: Tejun Heo Reviewed-by: Greg Kroah-Hartman Fixes: 4a3ef68acacf ("kernfs: implement i_generation") Cc: Namhyung Kim Cc: stable@vger.kernel.org # v4.14+

locking/lockdep: Remove unused @nested argument from lock_release()

2019-10-09T10:46:10Z

Since the following commit: b4adfe8e05f1 ("locking/lockdep: Remove unused argument in __lock_release") @nested is no longer used in lock_release(), so remove it from all lock_release() calls and friends. Signed-off-by: Qian Cai Signed-off-by: Peter Zijlstra (Intel) Acked-by: Will Deacon Acked-by: Daniel Vetter Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: airlied@linux.ie Cc: akpm@linux-foundation.org Cc: alexander.levin@microsoft.com Cc: daniel@iogearbox.net Cc: davem@davemloft.net Cc: dri-devel@lists.freedesktop.org Cc: duyuyang@gmail.com Cc: gregkh@linuxfoundation.org Cc: hannes@cmpxchg.org Cc: intel-gfx@lists.freedesktop.org Cc: jack@suse.com Cc: jlbec@evilplan.or Cc: joonas.lahtinen@linux.intel.com Cc: joseph.qi@linux.alibaba.com Cc: jslaby@suse.com Cc: juri.lelli@redhat.com Cc: maarten.lankhorst@linux.intel.com Cc: mark@fasheh.com Cc: mhocko@kernel.org Cc: mripard@kernel.org Cc: ocfs2-devel@oss.oracle.com Cc: rodrigo.vivi@intel.com Cc: sean@poorly.run Cc: st@kernel.org Cc: tj@kernel.org Cc: tytso@mit.edu Cc: vdavydov.dev@gmail.com Cc: vincent.guittot@linaro.org Cc: viro@zeniv.linux.org.uk Link: https://lkml.kernel.org/r/1568909380-32199-1-git-send-email-cai@lca.pw Signed-off-by: Ingo Molnar

fs: kernfs: Fix possible null-pointer dereferences in kernfs_path_from_node_locked()

2019-07-25T13:32:51Z

In kernfs_path_from_node_locked(), there is an if statement on line 147 to check whether buf is NULL: if (buf) When buf is NULL, it is used on line 151: len += strlcpy(buf + len, parent_str, ...) and line 158: len += strlcpy(buf + len, "/", ...) and line 160: len += strlcpy(buf + len, kn->name, ...) Thus, possible null-pointer dereferences may occur. To fix these possible bugs, buf is checked before being used. If it is NULL, -EINVAL is returned. These bugs are found by a static analysis tool STCheck written by us. Signed-off-by: Jia-Ju Bai Link: https://lore.kernel.org/r/20190724022242.27505-1-baijiaju1990@gmail.com Signed-off-by: Greg Kroah-Hartman