wireguard-linux/fs/kernfs/mount.c, branch jd/unified-crypt-queue

Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2019-12-06T17:06:58Z

Pull vfs d_inode/d_flags memory ordering fixes from Al Viro: "Fallout from tree-wide audit for ->d_inode/->d_flags barriers use. Basically, the problem is that negative pinned dentries require careful treatment - unless ->d_lock is locked or parent is held at least shared, another thread can make them positive right under us. Most of the uses turned out to be safe - the main surprises as far as filesystems are concerned were - race in dget_parent() fastpath, that might end up with the caller observing the returned dentry _negative_, due to insufficient barriers. It is positive in memory, but we could end up seeing the wrong value of ->d_inode in CPU cache. Fixed. - manual checks that result of lookup_one_len_unlocked() is positive (and rejection of negatives). Again, insufficient barriers (we might end up with inconsistent observed values of ->d_inode and ->d_flags). Fixed by switching to a new primitive that does the checks itself and returns ERR_PTR(-ENOENT) instead of a negative dentry. That way we get rid of boilerplate converting negatives into ERR_PTR(-ENOENT) in the callers and have a single place to deal with the barrier-related mess - inside fs/namei.c rather than in every caller out there. The guts of pathname resolution *do* need to be careful - the race found by Ritesh is real, as well as several similar races. Fortunately, it turns out that we can take care of that with fairly local changes in there. The tree-wide audit had not been fun, and I hate the idea of repeating it. I think the right approach would be to annotate the places where we are _not_ guaranteed ->d_inode/->d_flags stability and have sparse catch regressions. But I'm still not sure what would be the least invasive way of doing that and it's clearly the next cycle fodder" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs/namei.c: fix missing barriers when checking positivity fix dget_parent() fastpath race new helper: lookup_positive_unlocked() fs/namei.c: pull positivity check into follow_managed()

new helper: lookup_positive_unlocked()

2019-11-15T18:49:04Z

Most of the callers of lookup_one_len_unlocked() treat negatives are ERR_PTR(-ENOENT). Provide a helper that would do just that. Note that a pinned positive dentry remains positive - it's ->d_inode is stable, etc.; a pinned _negative_ dentry can become positive at any point as long as you are not holding its parent at least shared. So using lookup_one_len_unlocked() needs to be careful; lookup_positive_unlocked() is safer and that's what the callers end up open-coding anyway. Signed-off-by: Al Viro

kernfs: use 64bit inos if ino_t is 64bit

2019-11-12T16:18:04Z

Each kernfs_node is identified with a 64bit ID. The low 32bit is exposed as ino and the high gen. While this already allows using inos as keys by looking up with wildcard generation number of 0, it's adding unnecessary complications for 64bit ino archs which can directly use kernfs_node IDs as inos to uniquely identify each cgroup instance. This patch exposes IDs directly as inos on 64bit ino archs. The conversion is mostly straight-forward. * 32bit ino archs behave the same as before. 64bit ino archs now use the whole 64bit ID as ino and the generation number is fixed at 1. * 64bit inos still use the same idr allocator which gurantees that the lower 32bits identify the current live instance uniquely and the high 32bits are incremented whenever the low bits wrap. As the upper 32bits are no longer used as gen and we don't wanna start ino allocation with 33rd bit set, the initial value for highbits allocation is changed to 0 on 64bit ino archs. * blktrace exposes two 32bit numbers - (INO,GEN) pair - to identify the issuing cgroup. Userland builds FILEID_INO32_GEN fids from these numbers to look up the cgroups. To remain compatible with the behavior, always output (LOW32,HIGH32) which will be constructed back to the original 64bit ID by __kernfs_fh_to_dentry(). Signed-off-by: Tejun Heo Reviewed-by: Greg Kroah-Hartman Cc: Namhyung Kim

kernfs: implement custom exportfs ops and fid type

2019-11-12T16:18:04Z

The current kernfs exportfs implementation uses the generic_fh_*() helpers and FILEID_INO32_GEN[_PARENT] which limits ino to 32bits. Let's implement custom exportfs operations and fid type to remove the restriction. * FILEID_KERNFS is a single u64 value whose content is kernfs_node->id. This is the only native fid type. * For backward compatibility with blk_log_action() path which exposes (ino,gen) pairs which userland assembles into FILEID_INO32_GEN keys, combine the generic keys into 64bit IDs in the same order. Signed-off-by: Tejun Heo Reviewed-by: Greg Kroah-Hartman Cc: Namhyung Kim

kernfs: combine ino/id lookup functions into kernfs_find_and_get_node_by_id()

2019-11-12T16:18:04Z

kernfs_find_and_get_node_by_ino() looks the kernfs_node matching the specified ino. On top of that, kernfs_get_node_by_id() and kernfs_fh_get_inode() implement full ID matching by testing the rest of ID. On surface, confusingly, the two are slightly different in that the latter uses 0 gen as wildcard while the former doesn't - does it mean that the latter can't uniquely identify inodes w/ 0 gen? In practice, this is a distinction without a difference because generation number starts at 1. There are no actual IDs with 0 gen, so it can always safely used as wildcard. Let's simplify the code by renaming kernfs_find_and_get_node_by_ino() to kernfs_find_and_get_node_by_id(), moving all lookup logics into it, and removing now unnecessary kernfs_get_node_by_id(). Signed-off-by: Tejun Heo Reviewed-by: Greg Kroah-Hartman

kernfs: convert kernfs_node->id from union kernfs_node_id to u64

2019-11-12T16:18:03Z

kernfs_node->id is currently a union kernfs_node_id which represents either a 32bit (ino, gen) pair or u64 value. I can't see much value in the usage of the union - all that's needed is a 64bit ID which the current code is already limited to. Using a union makes the code unnecessarily complicated and prevents using 64bit ino without adding practical benefits. This patch drops union kernfs_node_id and makes kernfs_node->id a u64. ino is stored in the lower 32bits and gen upper. Accessors - kernfs[_id]_ino() and kernfs[_id]_gen() - are added to retrieve the ino and gen. This simplifies ID handling less cumbersome and will allow using 64bit inos on supported archs. This patch doesn't make any functional changes. Signed-off-by: Tejun Heo Reviewed-by: Greg Kroah-Hartman Cc: Namhyung Kim Cc: Jens Axboe Cc: Alexei Starovoitov

kernfs: use dumber locking for kernfs_find_and_get_node_by_ino()

2019-11-12T16:18:03Z

kernfs_find_and_get_node_by_ino() uses RCU protection. It's currently a bit buggy because it can look up a node which hasn't been activated yet and thus may end up exposing a node that the kernfs user is still prepping. While it can be fixed by pushing it further in the current direction, it's already complicated and isn't clear whether the complexity is justified. The main use of kernfs_find_and_get_node_by_ino() is for exportfs operations. They aren't super hot and all the follow-up operations (e.g. mapping to path) use normal locking anyway. Let's switch to a dumber locking scheme and protect the lookup with kernfs_idr_lock. Signed-off-by: Tejun Heo Reviewed-by: Greg Kroah-Hartman Cc: Namhyung Kim

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 428

2019-06-05T15:37:16Z

Based on 1 normalized pattern(s): this file is released under the gplv2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 68 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Armijn Hemel Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190114.292346262@linutronix.de Signed-off-by: Greg Kroah-Hartman

Merge branch 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2019-03-12T21:08:19Z

Pull vfs mount infrastructure updates from Al Viro: "The rest of core infrastructure; no new syscalls in that pile, but the old parts are switched to new infrastructure. At that point conversions of individual filesystems can happen independently; some are done here (afs, cgroup, procfs, etc.), there's also a large series outside of that pile dealing with NFS (quite a bit of option-parsing stuff is getting used there - it's one of the most convoluted filesystems in terms of mount-related logics), but NFS bits are the next cycle fodder. It got seriously simplified since the last cycle; documentation is probably the weakest bit at the moment - I considered dropping the commit introducing Documentation/filesystems/mount_api.txt (cutting the size increase by quarter ;-), but decided that it would be better to fix it up after -rc1 instead. That pile allows to do followup work in independent branches, which should make life much easier for the next cycle. fs/super.c size increase is unpleasant; there's a followup series that allows to shrink it considerably, but I decided to leave that until the next cycle" * 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (41 commits) afs: Use fs_context to pass parameters over automount afs: Add fs_context support vfs: Add some logging to the core users of the fs_context log vfs: Implement logging through fs_context vfs: Provide documentation for new mount API vfs: Remove kern_mount_data() hugetlbfs: Convert to fs_context cpuset: Use fs_context kernfs, sysfs, cgroup, intel_rdt: Support fs_context cgroup: store a reference to cgroup_ns into cgroup_fs_context cgroup1_get_tree(): separate "get cgroup_root to use" into a separate helper cgroup_do_mount(): massage calling conventions cgroup: stash cgroup_root reference into cgroup_fs_context cgroup2: switch to option-by-option parsing cgroup1: switch to option-by-option parsing cgroup: take options parsing into ->parse_monolithic() cgroup: fold cgroup1_mount() into cgroup1_get_tree() cgroup: start switching to fs_context ipc: Convert mqueue fs to fs_context proc: Add fs_context support to procfs ...

Merge tag 'driver-core-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2019-03-06T22:52:48Z

Pull driver core updates from Greg KH: "Here is the big driver core patchset for 5.1-rc1 More patches than "normal" here this merge window, due to some work in the driver core by Alexander Duyck to rework the async probe functionality to work better for a number of devices, and independant work from Rafael for the device link functionality to make it work "correctly". Also in here is: - lots of BUS_ATTR() removals, the macro is about to go away - firmware test fixups - ihex fixups and simplification - component additions (also includes i915 patches) - lots of minor coding style fixups and cleanups. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (65 commits) driver core: platform: remove misleading err_alloc label platform: set of_node in platform_device_register_full() firmware: hardcode the debug message for -ENOENT driver core: Add missing description of new struct device_link field driver core: Fix PM-runtime for links added during consumer probe drivers/component: kerneldoc polish async: Add cmdline option to specify drivers to be async probed driver core: Fix possible supplier PM-usage counter imbalance PM-runtime: Fix __pm_runtime_set_status() race with runtime resume driver: platform: Support parsing GpioInt 0 in platform_get_irq() selftests: firmware: fix verify_reqs() return value Revert "selftests: firmware: remove use of non-standard diff -Z option" Revert "selftests: firmware: add CONFIG_FW_LOADER_USER_HELPER_FALLBACK to config" device: Fix comment for driver_data in struct device kernfs: Allocating memory for kernfs_iattrs with kmem_cache. sysfs: remove unused include of kernfs-internal.h driver core: Postpone DMA tear-down until after devres release driver core: Document limitation related to DL_FLAG_RPM_ACTIVE PM-runtime: Take suppliers into account in __pm_runtime_set_status() device.h: Add __cold to dev_ logging functions ...