wireguard-linux/include/dt-bindings/power, branch jd/orphan-parallel

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2020-10-22T19:53:28Z

Pull clk updates from Stephen Boyd: "This contains no changes to the core framework. It is a collection of various clk driver updates. The biggest driver updates in terms of lines of code is the Allwinner driver, closely followed by the Qualcomm and Mediatek drivers. All of those hit high because we add so many lines of clk data. Coming in fourth place is i.MX which also adds a bunch of clk data. This accounts for the new driver additions this time around. Otherwise the patches are lots of little cleanups and fixes for various clk drivers that have baked in linux-next for a while. I suppose one highlight or theme is that more clk drivers are being updated to work as modules, which is interesting to see such critical SoC infrastructure work as a loadable module. New Drivers: - Support qcom SM8150/SM8250 video and display clks - Support Mediatek MT8167 clks - Add clock for CRC block found on vf610 SoCs - Add support for the Renesas R-Car V3U (R8A779A0) SoC - Add support for the VSP for Resizing clock on Renesas RZ/G1H - Support Allwinner A100 SoC clks Removed Drivers: - Remove i.MX21 clock driver, as i.MX21 platform support is being dropped Updates: - Change how qcom's display port clks work - Small non-critical fixes for TI clk driver - Remove various unused variables in clk drivers - Allow Rockchip clk driver to be a module - Remove most __clk_lookup() calls in Samsung drivers (yay!) - Support building i.MX ARMv8 platforms clock driver as module - Some kerneldoc fixes here and there - A couple of minor i.MX clk data corrections - Update audio clock inverter and fdiv2 flag on Amlogic g12 - Make amlogic clk drivers configurable in Kconfig - Fix Renesas VSP clock names to match corrected hardware documentation - Sigma-delta modulation on Allwinner R40 - Various fixes for at91 clk driver - Use semicolons instead of commas in some places - Mark some variables const so they can move to RO memory" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (102 commits) clk: imx8mq: Fix usdhc parents order clk: qcom: gdsc: Keep RETAIN_FF bit set if gdsc is already on clk: Restrict CLK_HSDK to ARC_SOC_HSDK clk: at91: sam9x60: support only two programmable clocks clk: ingenic: Respect CLK_SET_RATE_PARENT in .round_rate clk: ingenic: Don't tag custom clocks with CLK_SET_RATE_PARENT clk: ingenic: Don't use CLK_SET_RATE_GATE for PLL clk: ingenic: Use readl_poll_timeout instead of custom loop clk: ingenic: Use to_clk_info() macro for all clocks clk: bcm2835: add missing release if devm_clk_hw_register fails clk: at91: clk-sam9x60-pll: remove unused variable clk: at91: clk-main: update key before writing AT91_CKGR_MOR clk: at91: remove the checking of parent_name clk: clk-prima2: fix return value check in prima2_clk_init() clk: mmp2: Fix the display clock divider base clk: pxa: Constify static struct clk_ops clk: baikal-t1: Mark Ethernet PLL as critical clk: qoriq: modify MAX_PLL_DIV to 32 clk: axi-clkgen: Set power bits for fractional mode clk: axi-clkgen: Add support for fractional dividers ...

dt-bindings: power: Add r8a779a0 SYSC power domain definitions

2020-09-10T14:57:34Z

Add power domain indices for R-Car V3U (r8a779a0). Signed-off-by: Yoshihiro Shimoda Link: https://lore.kernel.org/r/1599470390-29719-5-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven

dt-bindings: power: supply: Add device-tree binding for Summit SMB3xx

2020-08-25T17:19:19Z

Summit SMB3xx series is a Programmable Switching Li+ Battery Charger. This patch adds device-tree binding for Summit SMB345, SMB347 and SMB358 chargers. Signed-off-by: David Heidelberg Signed-off-by: Dmitry Osipenko Reviewed-by: Rob Herring Signed-off-by: Sebastian Reichel

Merge tag 'qcom-arm64-for-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

2020-07-31T08:41:56Z

Qualcomm ARM64 DT additional updates for 5.9 For SC7180 this adds the necessary properties for blowing fuses in qfprom, Coresight fixes, GPU interconnect votes and specifies max speed for USB controller. SM8150 and SM8250 gains Adreno SMMU, the graphics management unit and the GPU nodes, to enable headless GPU usage. SDM845 gains tracing support for deep idle, GPU bus bandwidth scaling and DB845c gains the LT9611 HDMI bridge wired up. MSM8994 gains SMD RPM and SCM support and a new dts for the Sony Xperia Z5. MSM8992 is refactored and modernized and gets support for SCM, SPMI, BLSP2 UART and I2C nodes, PMU, RPM clock controller, PSCI and proper CPU definitions. Support for the Xiaomi Libra and Microsoft Lumia 950 are added. * tag 'qcom-arm64-for-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (31 commits) arm64: dts: qcom: Add Microsoft Lumia 950 (Talkman) device tree arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree arm64: dts: qcom: msm8992: Add RPMCC node arm64: dts: qcom: msm8992: Add PSCI support. arm64: dts: qcom: msm8992: Add PMU node arm64: dts: qcom: msm8992: Add BLSP2_UART2 and I2C nodes arm64: dts: qcom: msm8992: Add SPMI PMIC arbiter device arm64: dts: qcom: msm8992: Add a SCM node arm64: dts: qcom: msm8992: Add a proper CPU map arm64: dts: qcom: bullhead: Move UART pinctrl to SoC arm64: dts: qcom: bullhead: Add qcom,msm-id arm64: dts: qcom: msm8992: Fix SDHCI1 arm64: dts: qcom: msm8992: Modernize the DTS style arm64: dts: qcom: Add support for Sony Xperia Z5 (SoMC Sumire-RoW) arm64: dts: qcom: Move msm8994-smd-rpm contents to lg-bullhead. arm64: dts: qcom: msm8994: Add support for SMD RPM arm64: dts: qcom: msm8992: Add a label to rpm-requests arm64: dts: qcom: msm8994: Add SCM node arm64: dts: qcom: sdm845-db845c: Add hdmi bridge nodes arm64: dts: qcom: add sm8250 GPU nodes ... Link: https://lore.kernel.org/r/20200730052003.649940-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann

dt-bindings: power: Add missing rpmpd rpmh regulator level

2020-07-28T06:27:03Z

Add RPMH_REGULATOR_LEVEL_SVS_L0, used by sm8250. Acked-by: Rob Herring Signed-off-by: Jonathan Marek Link: https://lore.kernel.org/r/20200709135251.643-13-jonathan@marek.ca Signed-off-by: Bjorn Andersson

dt-bindings: power: Add r8a774e1 SYSC power domain definitions

2020-07-13T08:18:05Z

This patch adds power domain indices for the RZ/G2H (r8a774e1) SoC. Signed-off-by: Marian-Cristian Rotariu Signed-off-by: Lad Prabhakar Link: https://lore.kernel.org/r/1594138692-16816-5-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2020-06-10T18:42:19Z

Pull clk updates from Stephen Boyd: "This time around we have four lines of diff in the core framework, removing a function that isn't used anymore. Otherwise the main new thing for the common clk framework is that it is selectable in the Kconfig language now. Hopefully this will let clk drivers and clk consumers be testable on more than the architectures that support the clk framework. The goal is to introduce some Kunit tests for the framework. Outside of the core framework we have the usual set of various driver updates and non-critical fixes. The dirstat shows that the new Baikal-T1 driver is the largest addition this time around in terms of lines of code. After that the x86 (Intel), Qualcomm, and Mediatek drivers introduce many lines to support new or upcoming SoCs. After that the dirstat shows the usual suspects working on their SoC support by fixing minor bugs, correcting data and converting some of their DT bindings to YAML. Core: - Allow the COMMON_CLK config to be selectable New Drivers: - Clk driver for Baikal-T1 SoCs - Mediatek MT6765 clock support - Support for Intel Agilex clks - Add support for X1830 and X1000 Ingenic SoC clk controllers - Add support for the new Renesas RZ/G1H (R8A7742) SoC - Add support for Qualcomm's MSM8939 Generic Clock Controller Updates: - Support IDT VersaClock 5P49V5925 - Bunch of updates for HSDK clock generation unit (CGU) driver - Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver - Enable supply regulators for GPU gdscs on Qualcomm SoCs - Add support for Si5342, Si5344 and Si5345 chips - Support custom flags in Xilinx zynq firmware - Various small fixes to the Xilinx clk driver - A single minor rounding fix for the legacy Allwinner clock support - A few patches from Abel Vesa as preparation of adding audiomix clock support on i.MX - A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and clk-pllv3 drivers - Drop dependency on ARM64 for i.MX8M clock driver, to support aarch32 mode on aarch64 hardware - A series from Peng Fan to improve i.MX8M clock drivers, using composite clock for core and bus clk slice - Set a better parent clock for flexcan on i.MX6UL to support CiA102 defined bit rates - A couple changes for EMC frequency scaling on Tegra210 - Support for CPU frequency scaling on Tegra20/Tegra30 - New clk gate for CSI test pattern generator on Tegra210 - Regression fixes for Samsung exynos542x and exynos5433 SoCs - Use of fallthrough; attribute for Samsung s3c24xx - Updates and fixup HDMI and video clocks on Meson8b - Fixup reset polarity on Meson8b - Fix GPU glitch free mux switch on Meson gx and g12 - A minor fix for the currently unused suspend/resume handling on Renesas RZ/A1 and RZ/A2 - Two more conversions of Renesas DT bindings to json-schema - Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (155 commits) clk: mediatek: Remove ifr{0,1}_cfg_regs structures clk: baikal-t1: remove redundant assignment to variable 'divider' clk: baikal-t1: fix spelling mistake "Uncompatible" -> "Incompatible" dt-bindings: clock: Add a missing include to MMP Audio Clock binding dt: Add bindings for IDT VersaClock 5P49V5925 clk: vc5: Add support for IDT VersaClock 5P49V6965 clk: Add Baikal-T1 CCU Dividers driver clk: Add Baikal-T1 CCU PLLs driver dt-bindings: clk: Add Baikal-T1 CCU Dividers binding dt-bindings: clk: Add Baikal-T1 CCU PLLs binding clk: mediatek: assign the initial value to clk_init_data of mtk_mux clk: mediatek: Add MT6765 clock support clk: mediatek: add mt6765 clock IDs dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC CLK: HSDK: CGU: add support for 148.5MHz clock CLK: HSDK: CGU: support PLL bypassing CLK: HSDK: CGU: check if PLL is bypassed first clk: clk-si5341: Add support for the Si5345 series ...

Merge branches 'clk-mmp', 'clk-intel', 'clk-ingenic', 'clk-qcom' and 'clk-silabs' into clk-next

2020-06-01T20:00:28Z

- Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs - Add support for X1830 and X1000 Ingenic SoC clk controllers - Add support for Qualcomm's MSM8939 Generic Clock Controller - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver - Enable supply regulators for GPU gdscs on Qualcomm SoCs - Add support for Si5342, Si5344 and Si5345 chips * clk-mmp: clk: mmp2: Add audio clock controller driver dt-bindings: clock: Add Marvell MMP Audio Clock Controller binding clk: mmp2: Add support for power islands dt-bindings: marvell,mmp2: Add ids for the power domains dt-bindings: clock: Make marvell,mmp2-clock a power controller clk: mmp2: Add the audio clock clk: mmp2: Add the I2S clocks clk: mmp2: Rename mmp2_pll_init() to mmp2_main_clk_init() clk: mmp2: Move thermal register defines up a bit dt-bindings: marvell,mmp2: Add clock id for the Audio clock dt-bindings: marvell,mmp2: Add clock id for the I2S clocks clk: mmp: frac: Allow setting bits other than the numerator/denominator clk: mmp: frac: Do not lose last 4 digits of precision * clk-intel: clk: intel: remove redundant initialization of variable rate64 clk: intel: Add CGU clock driver for a new SoC dt-bindings: clk: intel: Add bindings document & header file for CGU * clk-ingenic: clk: ingenic: Mark ingenic_tcu_of_match as __maybe_unused clk: X1000: Add FIXDIV for SSI clock of X1000. dt-bindings: clock: Add and reorder ABI for X1000. clk: Ingenic: Add CGU driver for X1830. dt-bindings: clock: Add X1830 clock bindings. clk: Ingenic: Adjust cgu code to make it compatible with X1830. clk: Ingenic: Remove unnecessary spinlock when reading registers. * clk-qcom: clk: qcom: Add missing msm8998 ufs_unipro_core_clk_src dt-bindings: clock: Add YAML schemas for QCOM A53 PLL clk: qcom: gcc-msm8939: Add MSM8939 Generic Clock Controller clk: qcom: gcc: Add support for Secure control source clock dt-bindings: clock: Add gcc_sec_ctrl_clk_src clock ID clk: qcom: gcc: Add support for a new frequency for SC7180 clk: qcom: Add DT bindings for MSM8939 GCC clk: qcom: gcc: Add missing UFS clocks for SM8150 clk: qcom: gcc: Add GPU and NPU clocks for SM8150 clk: qcom: mmcc-msm8996: Properly describe GPU_GX gdsc clk: qcom: gdsc: Handle GDSC regulator supplies clk: qcom: msm8916: Fix the address location of pll->config_reg * clk-silabs: clk: clk-si5341: Add support for the Si5345 series

dt-bindings: marvell,mmp2: Add ids for the power domains

2020-05-28T00:55:12Z

On MMP2 the audio and GPU blocks are on separate power islands. On MMP3 the camera block's power is also controlled separately. Add the numbers that we could use to refer to the power domains for respective power islands from the device tree. Signed-off-by: Lubomir Rintel Acked-by: Rob Herring Link: https://lkml.kernel.org/r/20200519224151.2074597-11-lkundrak@v3.sk Signed-off-by: Stephen Boyd

Merge tag 'qcom-drivers-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers

2020-05-25T21:19:06Z

Qualcomm driver updates for v5.8 This contains a large set of cleanups, bug fixes, general improvements and documentation fixes for the RPMH driver. It adds a debugfs mechanism for inspecting Command DB. Socinfo got the "soc_id" attribute defines and definitions for a various variants of MSM8939. RPMH, RPMPD and RPMHPD where made possible to build as modules, but RPMH had to be reverted due to a compilation issue when tracing is enabled. RPMHPD gained power-domains for the SM8250 voltage corners. The SCM driver gained fixes for two build warnings and the SMP2P had an unnecessary error print removed. * tag 'qcom-drivers-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (42 commits) Revert "soc: qcom: rpmh: Allow RPMH driver to be loaded as a module" soc: qcom: rpmh-rsc: Remove the pm_lock soc: qcom: rpmh-rsc: Simplify locking by eliminating the per-TCS lock kernel/cpu_pm: Fix uninitted local in cpu_pm soc: qcom: rpmh-rsc: We aren't notified of our own failure w/ NOTIFY_BAD soc: qcom: rpmh-rsc: Correctly ignore CPU_CLUSTER_PM notifications firmware: qcom_scm-legacy: Replace zero-length array with flexible-array soc: qcom: rpmh-rsc: Timeout after 1 second in write_tcs_reg_sync() soc: qcom: rpmh-rsc: Factor "tcs_reg_addr" and "tcs_cmd_addr" calculation soc: qcom: socinfo: add msm8936/39 and apq8036/39 soc ids soc: qcom: aoss: Add SM8250 compatible soc: qcom: pdr: Remove impossible error condition soc: qcom: rpmh: Dirt can only make you dirtier, not cleaner soc: qcom: rpmhpd: Add SM8250 power domains firmware: qcom_scm: fix bogous abuse of dma-direct internals dt-bindings: soc: qcom: apr: Use generic node names for APR services firmware: qcom_scm: Remove unneeded conversion to bool soc: qcom: cmd-db: Properly endian swap the slv_id for debugfs soc: qcom: cmd-db: Use 5 digits for printing address soc: qcom: cmd-db: Cast sizeof() to int to silence field width warning ... Link: https://lore.kernel.org/r/20200519052533.1250024-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann