wireguard-linux/net/bluetooth/6lowpan.c, branch jd/unified-crypt-queue

net: core: add generic lockdep keys

2019-10-24T21:53:48Z

Some interface types could be nested. (VLAN, BONDING, TEAM, MACSEC, MACVLAN, IPVLAN, VIRT_WIFI, VXLAN, etc..) These interface types should set lockdep class because, without lockdep class key, lockdep always warn about unexisting circular locking. In the current code, these interfaces have their own lockdep class keys and these manage itself. So that there are so many duplicate code around the /driver/net and /net/. This patch adds new generic lockdep keys and some helper functions for it. This patch does below changes. a) Add lockdep class keys in struct net_device - qdisc_running, xmit, addr_list, qdisc_busylock - these keys are used as dynamic lockdep key. b) When net_device is being allocated, lockdep keys are registered. - alloc_netdev_mqs() c) When net_device is being free'd llockdep keys are unregistered. - free_netdev() d) Add generic lockdep key helper function - netdev_register_lockdep_key() - netdev_unregister_lockdep_key() - netdev_update_lockdep_key() e) Remove unnecessary generic lockdep macro and functions f) Remove unnecessary lockdep code of each interfaces. After this patch, each interface modules don't need to maintain their lockdep keys. Signed-off-by: Taehee Yoo Signed-off-by: David S. Miller

Bluetooth: 6lowpan: Make variable header_ops constant

2019-09-05T15:27:21Z

Static variable header_ops, of type header_ops, is used only once, when it is assigned to field header_ops of a variable having type net_device. This corresponding field is declared as const in the definition of net_device. Hence make header_ops constant as well to protect it from unnecessary modification. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta Signed-off-by: Marcel Holtmann

Bluetooth: 6lowpan: always check destination address

2019-07-06T19:33:55Z

BLE based 6LoWPAN networks are highly constrained in bandwidth. Do not take a short-cut, always check if the destination address is known to belong to a peer. As a side-effect this also removes any behavioral differences between one, and two or more connected peers. Acked-by: Jukka Rissanen Tested-by: Michael Scott Signed-off-by: Josua Mayer Signed-off-by: Marcel Holtmann

Bluetooth: 6lowpan: check neighbour table for SLAAC

2019-07-06T19:33:55Z

Like any IPv6 capable device, 6LNs can have multiple addresses assigned using SLAAC and made known through neighbour advertisements. After checking the destination address against all peers link-local addresses, consult the neighbour cache for additional known addresses. RFC7668 defines the scope of Neighbor Advertisements in Section 3.2.3: 1. "A Bluetooth LE 6LN MUST NOT register its link-local address" 2. "A Bluetooth LE 6LN MUST register its non-link-local addresses with the 6LBR by sending Neighbor Solicitation (NS) messages ..." Due to these constranits both the link-local addresses tracked in the list of 6lowpan peers, and the neighbour cache have to be used when identifying the 6lowpan peer for a destination address. Acked-by: Jukka Rissanen Tested-by: Michael Scott Signed-off-by: Josua Mayer Signed-off-by: Marcel Holtmann

Bluetooth: 6lowpan: search for destination address in all peers

2019-07-06T19:33:55Z

Handle overlooked case where the target address is assigned to a peer and neither route nor gateway exist. For one peer, no checks are performed to see if it is meant to receive packets for a given address. As soon as there is a second peer however, checks are performed to deal with routes and gateways for handling complex setups with multiple hops to a target address. This logic assumed that no route and no gateway imply that the destination address can not be reached, which is false in case of a direct peer. Acked-by: Jukka Rissanen Tested-by: Michael Scott Signed-off-by: Josua Mayer Signed-off-by: Marcel Holtmann

ipv6: constify rt6_nexthop()

2019-06-26T20:26:08Z

There is no functional change in this patch, it only prepares the next one. rt6_nexthop() will be used by ip6_dst_lookup_neigh(), which uses const variables. Signed-off-by: Nicolas Dichtel Reported-by: kbuild test robot Acked-by: Nick Desaulniers Signed-off-by: David S. Miller

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284

2019-06-05T15:36:37Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 and only version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 294 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Alexios Zavras Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de Signed-off-by: Greg Kroah-Hartman

Bluetooth: 6lowpan: Fix debugfs_simple_attr.cocci warnings

2019-01-22T08:51:19Z

Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE for debugfs files. Semantic patch information: Rationale: DEFINE_SIMPLE_ATTRIBUTE + debugfs_create_file() imposes some significant overhead as compared to DEFINE_DEBUGFS_ATTRIBUTE + debugfs_create_file_unsafe(). Generated by: scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci Signed-off-by: YueHaibing Signed-off-by: Marcel Holtmann

net: core: dev: Add extack argument to dev_open()

2018-12-06T21:26:06Z

In order to pass extack together with NETDEV_PRE_UP notifications, it's necessary to route the extack to __dev_open() from diverse (possibly indirect) callers. One prominent API through which the notification is invoked is dev_open(). Therefore extend dev_open() with and extra extack argument and update all users. Most of the calls end up just encoding NULL, but bond and team drivers have the extack readily available. Signed-off-by: Petr Machata Acked-by: Jiri Pirko Reviewed-by: Ido Schimmel Reviewed-by: David Ahern Signed-off-by: David S. Miller

iov_iter: Separate type from direction and use accessor functions

2018-10-23T23:41:07Z

In the iov_iter struct, separate the iterator type from the iterator direction and use accessor functions to access them in most places. Convert a bunch of places to use switch-statements to access them rather then chains of bitwise-AND statements. This makes it easier to add further iterator types. Also, this can be more efficient as to implement a switch of small contiguous integers, the compiler can use ~50% fewer compare instructions than it has to use bitwise-and instructions. Further, cease passing the iterator type into the iterator setup function. The iterator function can set that itself. Only the direction is required. Signed-off-by: David Howells