wireguard-linux/net/bluetooth/rfcomm, branch stable

Bluetooth: RFCOMM: Fix initial port reference race

2026-09-28T15:00:20Z

For RFCOMM_RELEASE_ONHUP devices, rfcomm_tty_install() and __rfcomm_release_dev() both use RFCOMM_TTY_OWNED to decide who drops the initial tty_port reference. The release path tests the bit separately from the install path setting it, so both can drop that reference. The synchronous hangup does not prevent this race: port->tty is not assigned until tty_port_open(), after installation. The following interleaving is possible: 1. Install and release each obtain a reference with rfcomm_dev_get(). 2. Release observes RFCOMM_TTY_OWNED clear. 3. Install sets RFCOMM_TTY_OWNED and drops the initial reference. 4. Release drops the same initial reference again. 5. TTY cleanup drops its reference and frees the device. 6. Release performs its final tty_port_put() on the freed port. KASAN reported: BUG: KASAN: slab-use-after-free in tty_port_put+0x22/0x190 Write of size 4 at addr ffff8881001d3d5c by task poc/92 Call Trace: tty_port_put+0x22/0x190 rfcomm_dev_ioctl+0x1d4/0x1930 sock_do_ioctl+0x110/0x260 sock_ioctl+0x380/0x590 __x64_sys_ioctl+0x134/0x1c0 Allocated by task 88: rfcomm_dev_ioctl+0x8f6/0x1930 sock_do_ioctl+0x110/0x260 sock_ioctl+0x380/0x590 __x64_sys_ioctl+0x134/0x1c0 Freed by task 65: kfree+0x131/0x3c0 rfcomm_dev_destruct+0x23b/0x2f0 release_one_tty+0xc1/0x370 process_one_work+0x661/0x1090 Use test_and_set_bit() in both paths so that only the caller that changes RFCOMM_TTY_OWNED from clear to set drops the initial reference. Each path keeps its own lookup reference until release or TTY cleanup, preserving the existing callback ordering and error handling. Fixes: 80ea73378af4 ("Bluetooth: Fix unreleased rfcomm_dev reference") Cc: stable@vger.kernel.org Assisted-by: LLM Signed-off-by: Chengfeng Ye Signed-off-by: Luiz Augusto von Dentz

Bluetooth: RFCOMM: Reject short EA=0 frames in rfcomm_recv_frame()

2026-09-21T13:37:20Z

While rfcomm_recv_frame() verifies that skb->len is at least sizeof(*hdr) + 1 (4 bytes: 3-byte header + 1-byte FCS), an RFCOMM frame with an extended 2-byte length field (!__test_ea(hdr->len)) has a 4-byte header plus a 1-byte FCS (5 bytes minimum, sizeof(*hdr) + 2). When a 4-byte RFCOMM frame with EA == 0 arrives: 1. The initial skb->len < sizeof(*hdr) + 1 check passes (4 < 4 is false). 2. Trimming the FCS byte decrements skb->len to 3. 3. If __check_fcs() succeeds, skb_pull(skb, 4) fails (4 > 3) and returns NULL without advancing skb->data. 4. Because the return value of skb_pull() is ignored, the un-pulled 3-byte struct rfcomm_hdr remains at skb->data and is either queued as application payload via rfcomm_recv_data() or parsed as a multiplexer control command via rfcomm_recv_mcc() on DLCI 0. Fix this by extending the length check in rfcomm_recv_frame() to also require skb->len >= sizeof(*hdr) + 2 when !__test_ea(hdr->len). Fixes: b230e5bf501c ("Bluetooth: RFCOMM: validate skb length in rfcomm_recv_frame") Assisted-by: LLM Signed-off-by: Hui Peng Signed-off-by: Luiz Augusto von Dentz

Bluetooth: RFCOMM: fix NULL dereference of dlc->session in RFCOMM_CONNINFO

2026-09-21T13:37:20Z

The RFCOMM_CONNINFO getsockopt handler accepts a socket that is not connected as long as deferred setup is enabled: if (sk->sk_state != BT_CONNECTED && !rfcomm_pi(sk)->dlc->defer_setup) { err = -ENOTCONN; break; } l2cap_sk = rfcomm_pi(sk)->dlc->session->sock->sk; dlc->defer_setup is set in rfcomm_sock_init() when rfcomm_connect_ind() creates a child socket for an incoming connection on a listening socket that has BT_DEFER_SETUP enabled. It is never cleared afterwards. The session, however, can go away underneath it. rfcomm_recv_disc() forces the dlc state before tearing it down: d->state = BT_CLOSED; __rfcomm_dlc_close(d, err); The RFCOMM_DEFER_SETUP early return in __rfcomm_dlc_close() only covers BT_CONNECT, BT_CONFIG, BT_OPEN and BT_CONNECT2, so with the state already BT_CLOSED that switch does not match and the function falls through to rfcomm_dlc_unlink(), which sets d->session = NULL, while d->defer_setup stays 1. A getsockopt(SOL_RFCOMM, RFCOMM_CONNINFO) on the accepted socket after that point therefore skips the -ENOTCONN path -- sk->sk_state is BT_CLOSED, but dlc->defer_setup is still set -- and dereferences the NULL session. No race is needed: once the DISC has been processed, the dereference is unconditional. Reproduced on a KASAN kernel under QEMU with a BR/EDR peer emulated over /dev/vhci: the peer brings up an ACL link, opens L2CAP on the RFCOMM PSM, starts a session and sends SABM for a channel bound with BT_DEFER_SETUP, and sends DISC for that dlci after the socket has been accepted. getsockopt(SOL_RFCOMM, RFCOMM_CONNINFO) on the accepted socket then hits: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 1 UID: 0 PID: 150 Comm: init Tainted: G B 7.3.0-rc3-g5dd1818b15d9 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:rfcomm_sock_getsockopt+0x529/0x780 Call Trace: do_sock_getsockopt+0x3ad/0x7d0 __sys_getsockopt+0x10e/0x1b0 __x64_sys_getsockopt+0xc2/0x160 do_syscall_64+0xda/0x4b0 entry_SYSCALL_64_after_hwframe+0x77/0x7f 0x10 is the offset of sock in struct rfcomm_session; rfcomm_sock_getsockopt_old() is inlined into rfcomm_sock_getsockopt(). Commit 43a556b2fd43 ("Bluetooth: RFCOMM: take rfcomm_mutex for the deferred setup accept") fixed the same "a remote DISC clears the session while deferred setup is still flagged" problem in rfcomm_dlc_accept(); this is the remaining instance of it, in the getsockopt path. Deferred setup only leaves a socket usable here once it has reached BT_CONNECT2, so restrict the exception to that state and check that a session is actually present before following it. Fixes: bb23c0ab8246 ("Bluetooth: Add support for deferring RFCOMM connection setup") Cc: stable@vger.kernel.org Assisted-by: LLM Signed-off-by: Hui Peng Signed-off-by: Luiz Augusto von Dentz

Bluetooth: RFCOMM: avoid socket lock inversion in listener cleanup

2026-09-15T18:55:41Z

rfcomm_sock_cleanup_listen() closes unaccepted child sockets through rfcomm_sock_close(), which takes the child socket lock before rfcomm_dlc_close() acquires rfcomm_mutex. The RFCOMM worker takes these locks in reverse order while handling connections and DLC state changes, so lockdep reports a possible deadlock. Close dequeued children without taking their socket lock. The accept queue owns a reference to each child, and bt_accept_dequeue() locks the child while unlinking it and clearing its parent pointer. Dropping the child lock makes it important to prevent a concurrent rfcomm_connect_ind() from enqueueing a new child after cleanup observes an empty queue. Set a listening socket to BT_CLOSED while its lock is still held, before dropping the lock and draining the queue. The state check in rfcomm_connect_ind() then rejects new children once cleanup starts. Reported-by: syzbot+0cece8fa7d83523f47a3@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=0cece8fa7d83523f47a3 Fixes: b7ce436a5d79 ("Bluetooth: switch to lock_sock in RFCOMM") Signed-off-by: Juan Perdomo Signed-off-by: Luiz Augusto von Dentz

Bluetooth: RFCOMM: serialize session teardown

2026-08-24T17:14:43Z

rfcomm_kill_listener() walks session_list and deletes every session without holding rfcomm_mutex, unlike the normal session processing and connect error paths. Under normal operation, an open RFCOMM socket pins rfcomm.ko, so rfcomm_kill_listener() does not run concurrently with rfcomm_dlc_open(). However, forced module unload via delete_module(O_TRUNC) can stop krfcommd while a failed connect is still unwinding. connect task forced unload / krfcommd ------------ ------------------------ rfcomm_lock() rfcomm_session_add() delete_module("rfcomm", O_TRUNC) rfcomm_kill_listener() fetch session from session_list kernel_connect() fails rfcomm_session_del() remove and free session rfcomm_session_del(session) The final call then reads the freed session and may corrupt the list. KASAN reported with mdelay() to enlarge critical window: BUG: KASAN: slab-use-after-free in rfcomm_run+0x3802/0x3f00 [rfcomm] Read of size 8 at addr ffff888111058d40 by task krfcommd/79 Tainted: [R]=FORCED_RMMOD Allocated by task 86: rfcomm_session_add+0xa1/0x300 [rfcomm] rfcomm_dlc_open+0x8b2/0xf30 [rfcomm] rfcomm_sock_connect+0x34c/0x530 [rfcomm] Freed by task 86: kfree+0x121/0x3c0 rfcomm_dlc_open+0xab7/0xf30 [rfcomm] rfcomm_sock_connect+0x34c/0x530 [rfcomm] Hold rfcomm_mutex across the teardown traversal so every reachable session_list walk uses the same serialization. Reviewed-by: Ali Ahmet Memis Tested-by: Ali Ahmet Memis Reviewed-by: Pauli Virtanen Signed-off-by: Chengfeng Ye Signed-off-by: Luiz Augusto von Dentz

Bluetooth: RFCOMM: serialize security confirmation handling

2026-08-24T17:13:36Z

rfcomm_security_cfm() looks up a session on session_list and then walks its DLC list without holding rfcomm_mutex. Since RFCOMM session teardown uses rfcomm_mutex, krfcommd can close and free the same session and DLCs concurrently: hci_rx_work krfcommd ----------- --------- rfcomm_session_get() rfcomm_lock() rfcomm_session_close() rfcomm_dlc_unlink() rfcomm_session_del() kfree(s) rfcomm_unlock() walk s->dlcs The callback can then read a freed session list head and touch freed DLCs while updating their flags or timers. Serialize the session lookup and DLC traversal in rfcomm_security_cfm() with rfcomm_mutex. This matches the existing RFCOMM session lifetime rules and prevents concurrent rfcomm_session_del() / rfcomm_dlc_unlink() from tearing the objects down while the callback is using them. KASAN reported: BUG: KASAN: slab-use-after-free in rfcomm_security_cfm+0x41c/0x440 Read of size 8 at addr ffff888111fb3960 by task kworker/u17:1/89 Workqueue: hci0 hci_rx_work Call Trace: rfcomm_security_cfm+0x41c/0x440 hci_encrypt_cfm+0x139/0x590 hci_encrypt_change_evt+0x37b/0xc40 hci_event_packet+0x71b/0xb20 hci_rx_work+0x293/0x730 Allocated by task 69: rfcomm_session_add+0x9e/0x2f0 rfcomm_run+0x44b/0x41e0 Freed by task 69: kfree+0x131/0x3c0 rfcomm_session_del+0x188/0x220 rfcomm_run+0x1985/0x41e0 Fixes: 08c30aca9e698faddebd34f81e1196295f9dc063 ("Bluetooth: Remove RFCOMM session refcnt") Cc: stable@vger.kernel.org Signed-off-by: Chengfeng Ye Signed-off-by: Luiz Augusto von Dentz

Bluetooth: RFCOMM: Validate MTU in rfcomm_apply_pn() to prevent infinite loop

2026-08-24T17:13:13Z

rfcomm_apply_pn() accepts the MTU value from a remote PN (Parameter Negotiation) frame without checking for zero. When the remote peer sends an MTU of zero, d->mtu is set to 0. This causes the sendmsg path to enter an infinite loop when fragmenting data, as each fragment has size == min_t(size_t, len, 0) == 0, so the remaining length never decreases. The infinite allocation of zero-length skbs exhausts all system memory. Fix by clamping d->mtu to RFCOMM_DEFAULT_MTU when the negotiated value is zero, consistent with the initial value assigned in rfcomm_dlc_alloc(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Hyunwoo Kim Signed-off-by: Luiz Augusto von Dentz

Bluetooth: RFCOMM: take rfcomm_mutex for the deferred setup accept

2026-08-07T19:40:28Z

rfcomm_sock_recvmsg() completes a deferred setup by calling rfcomm_dlc_accept() without holding any RFCOMM lock: if (test_and_clear_bit(RFCOMM_DEFER_SETUP, &d->flags)) { rfcomm_dlc_accept(d); return 0; } and rfcomm_dlc_accept() dereferences the session on its first line: struct sock *sk = d->session->sock->sk; Every other path that touches d->session runs under rfcomm_mutex: rfcomm_dlc_open(), rfcomm_dlc_close(), rfcomm_dlc_exists(), rfcomm_dlc_send_rpn(), and the RFCOMM thread through rfcomm_process_sessions(). rfcomm_connect_ind() is even documented as "called under rfcomm_lock()". This call site is the only one that skips it. The RFCOMM_DEFER_SETUP bit looks like it serialises the accept against teardown, since __rfcomm_dlc_close() returns early when it wins the test_and_clear. But rfcomm_recv_disc() forces the state first: d->state = BT_CLOSED; __rfcomm_dlc_close(d, err); and the early return only covers BT_CONNECT, BT_CONFIG, BT_OPEN and BT_CONNECT2. With the state already BT_CLOSED that switch does not match, the bit is never consulted, and __rfcomm_dlc_close() falls through to rfcomm_dlc_unlink(), which sets d->session = NULL. So a remote DISC on a deferred dlc clears the session while leaving RFCOMM_DEFER_SETUP set. The next recvmsg() then passes the test_and_clear and dereferences a NULL session. No timing window is needed: once the DISC has been processed, the dereference is unconditional. Give rfcomm_dlc_accept() the same shape as rfcomm_dlc_open() and rfcomm_dlc_close(): an exported wrapper that takes rfcomm_mutex and re-checks the session, around a __rfcomm_dlc_accept() that the two in-core callers, which already hold the mutex, keep using. Reproduced on a KASAN + PROVE_LOCKING kernel with a BR/EDR peer emulated over /dev/vhci: the peer brings up an ACL link, opens L2CAP on the RFCOMM PSM, starts a session, opens a dlc on a channel bound with BT_DEFER_SETUP, and sends DISC after the socket is accepted. recv() on the accepted socket then hits: Oops: general protection fault KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:rfcomm_dlc_accept+0x54/0x350 Call Trace: rfcomm_sock_recvmsg+0x1cd/0x230 sock_recvmsg+0x166/0x1c0 __sys_recvfrom+0x20d/0x300 0x10 is the offset of sock in struct rfcomm_session. With this patch the same run completes with recv() returning 0 and no report, and lockdep stays quiet, confirming rfcomm_mutex is still taken before lock_sock on this path as it is on the thread side. Fixes: bb23c0ab8246 ("Bluetooth: Add support for deferring RFCOMM connection setup") Cc: stable@vger.kernel.org Signed-off-by: Ali Ahmet Memis Signed-off-by: Luiz Augusto von Dentz

Bluetooth: fix BT dependency for submodules

2026-08-07T19:38:30Z

The modules rfcomm (BT_RFCOMM), bnep (BT_BNEP), hidp (BT_HIDP), and bluetooth_6lowpan (BT_6LOWPAN) are dependent on the bluetooth module (BT, tristate) only transitively through the boolean BT_BREDR for the first three and through the boolean BT_LE for the bluetooth_6lowpan. Therefore, the modules can be selected as built-in even if the BT=m. The combination of BT=m and =y for the said modules leads to the kernel build system silently ignoring those modules, without ever compiling them as built-in or as loadable modules. Add BT as a direct dependency to the Kconfig of rfcomm, bnep, hidp, and bluetooth_6lowpan. The modules set to =y when BT=m will default to =m, rather then getting silently ignored by the build system. Signed-off-by: Iva Kasprzaková Signed-off-by: Luiz Augusto von Dentz

Bluetooth: enable context analysis

2026-08-07T16:27:20Z

Enable compiler context analysis for Bluetooth subsystem and drivers. Signed-off-by: Pauli Virtanen Signed-off-by: Luiz Augusto von Dentz