wireguard-linux/net/bridge/br_device.c, branch jd/unified-crypt-queue

net: bridge: fix stale eth hdr pointer in br_dev_xmit

2020-02-24T19:11:19Z

In br_dev_xmit() we perform vlan filtering in br_allowed_ingress() but if the packet has the vlan header inside (e.g. bridge with disabled tx-vlan-offload) then the vlan filtering code will use skb_vlan_untag() to extract the vid before filtering which in turn calls pskb_may_pull() and we may end up with a stale eth pointer. Moreover the cached eth header pointer will generally be wrong after that operation. Remove the eth header caching and just use eth_hdr() directly, the compiler does the right thing and calculates it only once so we don't lose anything. Fixes: 057658cb33fb ("bridge: suppress arp pkts on BR_NEIGH_SUPPRESS ports") Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller

net: bridge: vlan: add per-vlan state

2020-01-24T11:58:14Z

The first per-vlan option added is state, it is needed for EVPN and for per-vlan STP. The state allows to control the forwarding on per-vlan basis. The vlan state is considered only if the port state is forwarding in order to avoid conflicts and be consistent. br_allowed_egress is called only when the state is forwarding, but the ingress case is a bit more complicated due to the fact that we may have the transition between port:BR_STATE_FORWARDING -> vlan:BR_STATE_LEARNING which should still allow the bridge to learn from the packet after vlan filtering and it will be dropped after that. Also to optimize the pvid state check we keep a copy in the vlan group to avoid one lookup. The state members are modified with *_ONCE() to annotate the lockless access. Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller

net: bridge: deny dev_set_mac_address() when unregistering

2019-12-03T19:21:20Z

We have an interesting memory leak in the bridge when it is being unregistered and is a slave to a master device which would change the mac of its slaves on unregister (e.g. bond, team). This is a very unusual setup but we do end up leaking 1 fdb entry because dev_set_mac_address() would cause the bridge to insert the new mac address into its table after all fdbs are flushed, i.e. after dellink() on the bridge has finished and we call NETDEV_UNREGISTER the bond/team would release it and will call dev_set_mac_address() to restore its original address and that in turn will add an fdb in the bridge. One fix is to check for the bridge dev's reg_state in its ndo_set_mac_address callback and return an error if the bridge is not in NETREG_REGISTERED. Easy steps to reproduce: 1. add bond in mode != A/B 2. add any slave to the bond 3. add bridge dev as a slave to the bond 4. destroy the bridge device Trace: unreferenced object 0xffff888035c4d080 (size 128): comm "ip", pid 4068, jiffies 4296209429 (age 1413.753s) hex dump (first 32 bytes): 41 1d c9 36 80 88 ff ff 00 00 00 00 00 00 00 00 A..6............ d2 19 c9 5e 3f d7 00 00 00 00 00 00 00 00 00 00 ...^?........... backtrace: [<00000000ddb525dc>] kmem_cache_alloc+0x155/0x26f [<00000000633ff1e0>] fdb_create+0x21/0x486 [bridge] [<0000000092b17e9c>] fdb_insert+0x91/0xdc [bridge] [<00000000f2a0f0ff>] br_fdb_change_mac_address+0xb3/0x175 [bridge] [<000000001de02dbd>] br_stp_change_bridge_id+0xf/0xff [bridge] [<00000000ac0e32b1>] br_set_mac_address+0x76/0x99 [bridge] [<000000006846a77f>] dev_set_mac_address+0x63/0x9b [<00000000d30738fc>] __bond_release_one+0x3f6/0x455 [bonding] [<00000000fc7ec01d>] bond_netdev_event+0x2f2/0x400 [bonding] [<00000000305d7795>] notifier_call_chain+0x38/0x56 [<0000000028885d4a>] call_netdevice_notifiers+0x1e/0x23 [<000000008279477b>] rollback_registered_many+0x353/0x6a4 [<0000000018ef753a>] unregister_netdevice_many+0x17/0x6f [<00000000ba854b7a>] rtnl_delete_link+0x3c/0x43 [<00000000adf8618d>] rtnl_dellink+0x1dc/0x20a [<000000009b6395fd>] rtnetlink_rcv_msg+0x23d/0x268 Fixes: 43598813386f ("bridge: add local MAC address to forwarding table (v2)") Reported-by: syzbot+2add91c08eb181fea1bf@syzkaller.appspotmail.com Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller

bridge: implement get_link_ksettings ethtool method

2019-11-13T03:52:15Z

We return the maximum speed of all active ports. This matches how the link speed would give an upper limit for traffic to/from any single peer if the bridge were replaced with a hardware switch. Signed-off-by: Matthias Schiffer Signed-off-by: David S. Miller

net: core: add generic lockdep keys

2019-10-24T21:53:48Z

Some interface types could be nested. (VLAN, BONDING, TEAM, MACSEC, MACVLAN, IPVLAN, VIRT_WIFI, VXLAN, etc..) These interface types should set lockdep class because, without lockdep class key, lockdep always warn about unexisting circular locking. In the current code, these interfaces have their own lockdep class keys and these manage itself. So that there are so many duplicate code around the /driver/net and /net/. This patch adds new generic lockdep keys and some helper functions for it. This patch does below changes. a) Add lockdep class keys in struct net_device - qdisc_running, xmit, addr_list, qdisc_busylock - these keys are used as dynamic lockdep key. b) When net_device is being allocated, lockdep keys are registered. - alloc_netdev_mqs() c) When net_device is being free'd llockdep keys are unregistered. - free_netdev() d) Add generic lockdep key helper function - netdev_register_lockdep_key() - netdev_unregister_lockdep_key() - netdev_update_lockdep_key() e) Remove unnecessary generic lockdep macro and functions f) Remove unnecessary lockdep code of each interfaces. After this patch, each interface modules don't need to maintain their lockdep keys. Signed-off-by: Taehee Yoo Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2019-06-07T18:00:14Z

Some ISDN files that got removed in net-next had some changes done in mainline, take the removals. Signed-off-by: David S. Miller

netfilter: bridge: add connection tracking system

2019-05-30T21:18:18Z

This patch adds basic connection tracking support for the bridge, including initial IPv4 support. This patch register two hooks to deal with the bridge forwarding path, one from the bridge prerouting hook to call nf_conntrack_in(); and another from the bridge postrouting hook to confirm the entry. The conntrack bridge prerouting hook defragments packets before passing them to nf_conntrack_in() to look up for an existing entry, otherwise a new entry is allocated and it is attached to the skbuff. The conntrack bridge postrouting hook confirms new conntrack entries, ie. if this is the first packet seen, then it adds the entry to the hashtable and (if needed) it refragments the skbuff into the original fragments, leaving the geometry as is if possible. Exceptions are linearized skbuffs, eg. skbuffs that are passed up to nfqueue and conntrack helpers, as well as cloned skbuff for the local delivery (eg. tcpdump), also in case of bridge port flooding (cloned skbuff too). The packet defragmentation is done through the ip_defrag() call. This forces us to save the bridge control buffer, reset the IP control buffer area and then restore it after call. This function also bumps the IP fragmentation statistics, it would be probably desiderable to have independent statistics for the bridge defragmentation/refragmentation. The maximum fragment length is stored in the control buffer and it is used to refragment the skbuff from the postrouting path. The new fraglist splitter and fragment transformer APIs are used to implement the bridge refragmentation code. The br_ip_fragment() function drops the packet in case the maximum fragment size seen is larger than the output port MTU. This patchset follows the principle that conntrack should not drop packets, so users can do it through policy via invalid state matching. Like br_netfilter, there is no refragmentation for packets that are passed up for local delivery, ie. prerouting -> input path. There are calls to nf_reset() already in several spots in the stack since time ago already, eg. af_packet, that show that skbuff fraglist handling from the netif_rx path is supported already. The helpers are called from the postrouting hook, before confirmation, from there we may see packet floods to bridge ports. Then, although unlikely, this may result in exercising the helpers many times for each clone. It would be good to explore how to pass all the packets in a list to the conntrack hook to do this handle only once for this case. Thanks to Florian Westphal for handing me over an initial patchset version to add support for conntrack bridge. Signed-off-by: Pablo Neira Ayuso Signed-off-by: David S. Miller

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman

bridge: support for ndo_fdb_get

2018-12-16T22:42:34Z

This patch implements ndo_fdb_get for the bridge fdb. Signed-off-by: Roopa Prabhu Acked-by: Nikolay Aleksandrov Reviewed-by: David Ahern Signed-off-by: David S. Miller

net: bridge: convert multicast to generic rhashtable

2018-12-06T01:01:51Z

The bridge multicast code currently uses a custom resizable hashtable which predates the generic rhashtable interface. It has many shortcomings compared and duplicates functionality that is presently available via the generic rhashtable, so this patch removes the custom rhashtable implementation in favor of the kernel's generic rhashtable. The hash maximum is kept and the rhashtable's size is used to do a loose check if it's reached in which case we revert to the old behaviour and disable further bridge multicast processing. Also now we can support any hash maximum, doesn't need to be a power of 2. v3: add non-rcu br_mdb_get variant and use it where multicast_lock is held to avoid RCU splat, drop hash_max function and just set it directly v2: handle when IGMP snooping is undefined, add br_mdb_init/uninit placeholders Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller