wireguard-linux/net/mac80211/util.c, branch jd/bump-compilers

wifi: mac80211: handle ieee80211_radar_detected() for MLO

2024-09-06T11:01:05Z

Currently DFS works under assumption there could be only one channel context in the hardware. Hence, drivers just calls the function ieee80211_radar_detected() passing the hardware structure. However, with MLO, this obviously will not work since number of channel contexts will be more than one and hence drivers would need to pass the channel information as well on which the radar is detected. Also, when radar is detected in one of the links, other link's CAC should not be cancelled. Hence, in order to support DFS with MLO, do the following changes - * Add channel context conf pointer as an argument to the function ieee80211_radar_detected(). During MLO, drivers would have to pass on which channel context conf radar is detected. Otherwise, drivers could just pass NULL. * ieee80211_radar_detected() will iterate over all channel contexts present and * if channel context conf is passed, only mark that as radar detected * if NULL is passed, then mark all channel contexts as radar detected * Then as usual, schedule the radar detected work. * In the worker, go over all the contexts again and for all such context which is marked with radar detected, cancel the ongoing CAC by calling ieee80211_dfs_cac_cancel() and then notify cfg80211 via cfg80211_radar_event(). * To cancel the CAC, pass the channel context as well where radar is detected to ieee80211_dfs_cac_cancel(). This ensures that CAC is canceled only on the links using the provided context, leaving other links unaffected. This would also help in scenarios where there is split phy 5 GHz radio, which is capable of DFS channels in both lower and upper band. In this case, simultaneous radars can be detected. Signed-off-by: Aditya Kumar Singh Link: https://patch.msgid.link/20240906064426.2101315-9-quic_adisi@quicinc.com Signed-off-by: Johannes Berg

wifi: mac80211: handle DFS per link

2024-09-06T11:01:05Z

In order to support DFS with MLO, handle the link ID now passed from cfg80211, adjust the code to do everything per link and call the notifications to cfg80211 correctly. Signed-off-by: Aditya Kumar Singh Link: https://patch.msgid.link/20240906064426.2101315-7-quic_adisi@quicinc.com Signed-off-by: Johannes Berg

wifi: cfg80211: handle DFS per link

2024-09-06T11:01:05Z

Currently, during starting a radar detection, no link id information is parsed and passed down. In order to support starting radar detection during Multi Link Operation, it is required to pass link id as well. Add changes to first parse and then pass link id in the start radar detection path. Additionally, update notification APIs to allow drivers/mac80211 to pass the link ID. However, everything is handled at link 0 only until all API's are ready to handle it per link. Signed-off-by: Aditya Kumar Singh Link: https://patch.msgid.link/20240906064426.2101315-6-quic_adisi@quicinc.com Signed-off-by: Johannes Berg

wifi: cfg80211: move DFS related members to links[] in wireless_dev

2024-09-06T11:01:05Z

A few members related to DFS handling are currently under per wireless device data structure. However, in order to support DFS with MLO, there is a need to have them on a per-link manner. Hence, as a preliminary step, move members cac_started, cac_start_time and cac_time_ms to be on a per-link basis. Since currently, link ID is not known at all places, use default value of 0 for now. Signed-off-by: Aditya Kumar Singh Link: https://patch.msgid.link/20240906064426.2101315-5-quic_adisi@quicinc.com Signed-off-by: Johannes Berg

Revert "wifi: mac80211: move radar detect work to sdata"

2024-09-06T11:01:04Z

This reverts commit ce9e660ef32e ("wifi: mac80211: move radar detect work to sdata"). To enable radar detection with MLO, it’s essential to handle it on a per-link basis. This is because when using MLO, multiple links may already be active and beaconing. In this scenario, another link should be able to initiate a radar detection. Also, if underlying links are associated with different hardware devices but grouped together for MLO, they could potentially start radar detection simultaneously. Therefore, it makes sense to manage radar detection settings separately for each link by moving them back to a per-link data structure. Signed-off-by: Aditya Kumar Singh Link: https://patch.msgid.link/20240906064426.2101315-2-quic_adisi@quicinc.com Signed-off-by: Johannes Berg

Merge tag 'wireless-next-2024-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

2024-09-05T00:20:14Z

Kalle Valo says: ==================== pull-request: wireless-next-2024-09-04 here's a pull request to net-next tree, more info below. Please let me know if there are any problems. ==================== Conflicts: drivers/net/wireless/ath/ath12k/hw.c 38055789d151 ("wifi: ath12k: use 128 bytes aligned iova in transmit path for WCN7850") 8be12629b428 ("wifi: ath12k: restore ASPM for supported hardwares only") https://lore.kernel.org/87msldyj97.fsf@kernel.org Link: https://patch.msgid.link/20240904153205.64C11C4CEC2@smtp.kernel.org Signed-off-by: Jakub Kicinski

wifi: mac80211: fix RCU list iterations

2024-08-28T10:39:29Z

There are a number of places where RCU list iteration is used, but that aren't (always) called with RCU held. Use just list_for_each_entry() in most, and annotate iface iteration with the required locks. Reviewed-by: Miriam Rachel Korenblit Link: https://patch.msgid.link/20240827094939.ed8ac0b2f897.I8443c9c3c0f8051841353491dae758021b53115e@changeid Signed-off-by: Johannes Berg

wifi: mac80211: Add non-atomic station iterator

2024-08-27T08:28:53Z

Drivers may at times want to iterate their stations with a function which requires some non-atomic operations. ieee80211_iterate_stations_mtx() introduces an API to iterate stations while holding that wiphy's mutex. This allows the iterating function to do non-atomic operations safely. Signed-off-by: Rory Little Link: https://patch.msgid.link/20240806004024.2014080-2-rory@candelatech.com [unify internal list iteration functions] Signed-off-by: Johannes Berg

wifi: mac80211: use monitor sdata with driver only if desired

2024-07-26T10:30:49Z

In commit 0d9c2beed116 ("wifi: mac80211: fix monitor channel with chanctx emulation") I changed mac80211 to always have an internal monitor_sdata to have something to have the chanctx bound to. However, if the driver didn't also have the WANT_MONITOR flag this would cause mac80211 to allocate it without telling the driver (which was intentional) but also use it for later APIs to the driver without it ever having known about it which was _not_ intentional. Check through the code and only use the monitor_sdata in the relevant places (TX, MU-MIMO follow settings, TX power, and interface iteration) when the WANT_MONITOR flag is set. Cc: stable@vger.kernel.org Fixes: 0d9c2beed116 ("wifi: mac80211: fix monitor channel with chanctx emulation") Reported-by: ZeroBeat Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219086 Tested-by: Lorenzo Bianconi Link: https://patch.msgid.link/20240725184836.25d334157a8e.I02574086da2c5cf0e18264ce5807db6f14ffd9c0@changeid Signed-off-by: Johannes Berg

wifi: mac80211: extend ifcomb check functions for multi-radio

2024-07-09T09:36:12Z

Add support for counting global and per-radio max/current number of channels, as well as checking radio-specific interface combinations. Signed-off-by: Felix Fietkau Link: https://patch.msgid.link/e76307f8ce562a91a74faab274ae01f6a5ba0a2e.1720514221.git-series.nbd@nbd.name Signed-off-by: Johannes Berg