wireguard-linux/net/openvswitch, branch jd/bump-compilers

netdev_features: convert NETIF_F_NETNS_LOCAL to dev->netns_local

2024-09-03T09:36:43Z

"Interface can't change network namespaces" is rather an attribute, not a feature, and it can't be changed via Ethtool. Make it a "cold" private flag instead of a netdev_feature and free one more bit. Signed-off-by: Alexander Lobakin Signed-off-by: Paolo Abeni

netdev_features: convert NETIF_F_LLTX to dev->lltx

2024-09-03T09:36:43Z

NETIF_F_LLTX can't be changed via Ethtool and is not a feature, rather an attribute, very similar to IFF_NO_QUEUE (and hot). Free one netdev_features_t bit and make it a "hot" private flag. Signed-off-by: Alexander Lobakin Signed-off-by: Paolo Abeni

net: openvswitch: Use ERR_CAST() to return

2024-08-30T18:11:45Z

Using ERR_CAST() is more reasonable and safer, When it is necessary to convert the type of an error pointer and return it. Signed-off-by: Yan Zhen Acked-by: Eelco Chaudron Reviewed-by: Aaron Conole Link: https://patch.msgid.link/20240829095509.3151987-1-yanzhen@vivo.com Signed-off-by: Jakub Kicinski

tc: adjust network header after 2nd vlan push

2024-08-27T09:37:42Z

skb network header of the single-tagged vlan packet continues to point the vlan payload (e.g. IP) after second vlan tag is pushed by tc act_vlan. This causes problem at the dissector which expects double-tagged packet network header to point to the inner vlan. The fix is to adjust network header in tcf_act_vlan.c but requires refactoring of skb_vlan_push function. Consider the following shell script snippet configuring TC rules on the veth interface: ip link add veth0 type veth peer veth1 ip link set veth0 up ip link set veth1 up tc qdisc add dev veth0 clsact tc filter add dev veth0 ingress pref 10 chain 0 flower \ num_of_vlans 2 cvlan_ethtype 0x800 action goto chain 5 tc filter add dev veth0 ingress pref 20 chain 0 flower \ num_of_vlans 1 action vlan push id 100 \ protocol 0x8100 action goto chain 5 tc filter add dev veth0 ingress pref 30 chain 5 flower \ num_of_vlans 2 cvlan_ethtype 0x800 action simple sdata "success" Sending double-tagged vlan packet with the IP payload inside: cat <protocol; } else { vlan = __skb_header_pointer(skb, nhoff, sizeof(_vlan), data, hlen, &_vlan); if (!vlan) { fdret = FLOW_DISSECT_RET_OUT_BAD; break; } proto = vlan->h_vlan_encapsulated_proto; nhoff += sizeof(*vlan); } The "else" clause above gets the protocol of the encapsulated packet from the skb data at the network header location. printk debugging has showed that in the good double-tagged packet case proto is htons(0x800 == ETH_P_IP) as expected. However in the single-tagged packet case proto is garbage leading to the failure to match tc filter 30. proto is being set from the skb header pointed by nhoff parameter which is defined at the beginning of __skb_flow_dissect (net/core/flow_dissector.c:1055 in the current version): nhoff = skb_network_offset(skb); Therefore the culprit seems to be that the skb network offset is different between double-tagged packet received from the interface and single-tagged packet having its vlan tag pushed by TC. Lets look at the interesting points of the lifetime of the single/double tagged packets as they traverse our packet flow. Both of them will start at __netif_receive_skb_core where the first vlan tag will be stripped: if (eth_type_vlan(skb->protocol)) { skb = skb_vlan_untag(skb); if (unlikely(!skb)) goto out; } At this stage in double-tagged case skb->data points to the second vlan tag while in single-tagged case skb->data points to the network (eg. IP) header. Looking at TC vlan push action (net/sched/act_vlan.c) we have the following code at tcf_vlan_act (interesting points are in square brackets): if (skb_at_tc_ingress(skb)) [1] skb_push_rcsum(skb, skb->mac_len); .... case TCA_VLAN_ACT_PUSH: err = skb_vlan_push(skb, p->tcfv_push_proto, p->tcfv_push_vid | (p->tcfv_push_prio << VLAN_PRIO_SHIFT), 0); if (err) goto drop; break; .... out: if (skb_at_tc_ingress(skb)) [3] skb_pull_rcsum(skb, skb->mac_len); And skb_vlan_push (net/core/skbuff.c:6204) function does: err = __vlan_insert_tag(skb, skb->vlan_proto, skb_vlan_tag_get(skb)); if (err) return err; skb->protocol = skb->vlan_proto; [2] skb->mac_len += VLAN_HLEN; in the case of pushing the second tag. Lets look at what happens with skb->data of the single-tagged packet at each of the above points: 1. As a result of the skb_push_rcsum, skb->data is moved back to the start of the packet. 2. First VLAN tag is moved from the skb into packet buffer, skb->mac_len is incremented, skb->data still points to the start of the packet. 3. As a result of the skb_pull_rcsum, skb->data is moved forward by the modified skb->mac_len, thus pointing to the network header again. Then __skb_flow_dissect will get confused by having double-tagged vlan packet with the skb->data at the network header. The solution for the bug is to preserve "skb->data at second vlan header" semantics in the skb_vlan_push function. We do this by manipulating skb->network_header rather than skb->mac_len. skb_vlan_push callers are updated to do skb_reset_mac_len. Signed-off-by: Boris Sukholitko Signed-off-by: Paolo Abeni

Merge tag 'nf-next-24-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next

2024-08-26T15:42:55Z

Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following batch contains Netfilter updates for net-next: Patch #1 fix checksum calculation in nfnetlink_queue with SCTP, segment GSO packet since skb_zerocopy() does not support GSO_BY_FRAGS, from Antonio Ojea. Patch #2 extend nfnetlink_queue coverage to handle SCTP packets, from Antonio Ojea. Patch #3 uses consume_skb() instead of kfree_skb() in nfnetlink, from Donald Hunter. Patch #4 adds a dedicate commit list for sets to speed up intra-transaction lookups, from Florian Westphal. Patch #5 skips removal of element from abort path for the pipapo backend, ditching the shadow copy of this datastructure is sufficient. Patch #6 moves nf_ct_netns_get() out of nf_conncount_init() to let users of conncoiunt decide when to enable conntrack, this is needed by openvswitch, from Xin Long. Patch #7 pass context to all nft_parse_register_load() in preparation for the next patch. Patches #8 and #9 reject loads from uninitialized registers from control plane to remove register initialization from datapath. From Florian Westphal. * tag 'nf-next-24-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: nf_tables: don't initialize registers in nft_do_chain() netfilter: nf_tables: allow loads only when register is initialized netfilter: nf_tables: pass context structure to nft_parse_register_load netfilter: move nf_ct_netns_get out of nf_conncount_init netfilter: nf_tables: do not remove elements if set backend implements .abort netfilter: nf_tables: store new sets in dedicated list netfilter: nfnetlink: convert kfree_skb to consume_skb selftests: netfilter: nft_queue.sh: sctp coverage netfilter: nfnetlink_queue: unbreak SCTP traffic ==================== Link: https://patch.msgid.link/20240822221939.157858-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2024-08-23T00:06:18Z

Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: drivers/net/ethernet/broadcom/bnxt/bnxt.h c948c0973df5 ("bnxt_en: Don't clear ntuple filters and rss contexts during ethtool ops") f2878cdeb754 ("bnxt_en: Add support to call FW to update a VNIC") Link: https://patch.msgid.link/20240822210125.1542769-1-kuba@kernel.org Signed-off-by: Jakub Kicinski

net: ovs: fix ovs_drop_reasons error

2024-08-22T20:09:15Z

There is something wrong with ovs_drop_reasons. ovs_drop_reasons[0] is "OVS_DROP_LAST_ACTION", but OVS_DROP_LAST_ACTION == __OVS_DROP_REASON + 1, which means that ovs_drop_reasons[1] should be "OVS_DROP_LAST_ACTION". And as Adrian tested, without the patch, adding flow to drop packets results in: drop at: do_execute_actions+0x197/0xb20 [openvsw (0xffffffffc0db6f97) origin: software input port ifindex: 8 timestamp: Tue Aug 20 10:19:17 2024 859853461 nsec protocol: 0x800 length: 98 original length: 98 drop reason: OVS_DROP_ACTION_ERROR With the patch, the same results in: drop at: do_execute_actions+0x197/0xb20 [openvsw (0xffffffffc0db6f97) origin: software input port ifindex: 8 timestamp: Tue Aug 20 10:16:13 2024 475856608 nsec protocol: 0x800 length: 98 original length: 98 drop reason: OVS_DROP_LAST_ACTION Fix this by initializing ovs_drop_reasons with index. Fixes: 9d802da40b7c ("net: openvswitch: add last-action drop reason") Signed-off-by: Menglong Dong Tested-by: Adrian Moreno Reviewed-by: Adrian Moreno Link: https://patch.msgid.link/20240821123252.186305-1-dongml2@chinatelecom.cn Signed-off-by: Jakub Kicinski

netfilter: move nf_ct_netns_get out of nf_conncount_init

2024-08-19T16:44:51Z

This patch is to move nf_ct_netns_get() out of nf_conncount_init() and let the consumers of nf_conncount decide if they want to turn on netfilter conntrack. It makes nf_conncount more flexible to be used in other places and avoids netfilter conntrack turned on when using it in openvswitch conntrack. Signed-off-by: Xin Long Reviewed-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso

openvswitch: switch to per-action label counting in conntrack

2024-08-16T02:05:19Z

Similar to commit 70f06c115bcc ("sched: act_ct: switch to per-action label counting"), we should also switch to per-action label counting in openvswitch conntrack, as Florian suggested. The difference is that nf_connlabels_get() is called unconditionally when creating an ct action in ovs_ct_copy_action(). As with these flows: table=0,ip,actions=ct(commit,table=1) table=1,ip,actions=ct(commit,exec(set_field:0xac->ct_label),table=2) it needs to make sure the label ext is created in the 1st flow before the ct is committed in ovs_ct_commit(). Otherwise, the warning in nf_ct_ext_add() when creating the label ext in the 2nd flow will be triggered: WARN_ON(nf_ct_is_confirmed(ct)); Signed-off-by: Xin Long Reviewed-by: Aaron Conole Acked-by: Florian Westphal Link: https://patch.msgid.link/6b9347d5c1a0b364e88d900b29a616c3f8e5b1ca.1723483073.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski

net: openvswitch: store sampling probability in cb.

2024-07-06T00:45:47Z

When a packet sample is observed, the sampling rate that was used is important to estimate the real frequency of such event. Store the probability of the parent sample action in the skb's cb area and use it in psample action to pass it down to psample module. Reviewed-by: Aaron Conole Acked-by: Eelco Chaudron Reviewed-by: Ilya Maximets Signed-off-by: Adrian Moreno Link: https://patch.msgid.link/20240704085710.353845-7-amorenoz@redhat.com Signed-off-by: Jakub Kicinski