wireguard-linux/net/rxrpc/conn_object.c, branch jd/unified-crypt-queue

rxrpc: Fix service call disconnection

2020-02-07T10:19:38Z

The recent patch that substituted a flag on an rxrpc_call for the connection pointer being NULL as an indication that a call was disconnected puts the set_bit in the wrong place for service calls. This is only a problem if a call is implicitly terminated by a new call coming in on the same connection channel instead of a terminating ACK packet. In such a case, rxrpc_input_implicit_end_call() calls __rxrpc_disconnect_call(), which is now (incorrectly) setting the disconnection bit, meaning that when rxrpc_release_call() is later called, it doesn't call rxrpc_disconnect_call() and so the call isn't removed from the peer's error distribution list and the list gets corrupted. KASAN finds the issue as an access after release on a call, but the position at which it occurs is confusing as it appears to be related to a different call (the call site is where the latter call is being removed from the error distribution list and either the next or pprev pointer points to a previously released call). Fix this by moving the setting of the flag from __rxrpc_disconnect_call() to rxrpc_disconnect_call() in the same place that the connection pointer was being cleared. Fixes: 5273a191dca6 ("rxrpc: Fix NULL pointer deref due to call->conn being cleared on disconnect") Signed-off-by: David Howells Signed-off-by: David S. Miller

rxrpc: Fix NULL pointer deref due to call->conn being cleared on disconnect

2020-02-03T10:25:30Z

When a call is disconnected, the connection pointer from the call is cleared to make sure it isn't used again and to prevent further attempted transmission for the call. Unfortunately, there might be a daemon trying to use it at the same time to transmit a packet. Fix this by keeping call->conn set, but setting a flag on the call to indicate disconnection instead. Remove also the bits in the transmission functions where the conn pointer is checked and a ref taken under spinlock as this is now redundant. Fixes: 8d94aa381dab ("rxrpc: Calls shouldn't hold socket refs") Signed-off-by: David Howells

rxrpc: Fix trace-after-put looking at the put connection record

2019-10-07T10:05:05Z

rxrpc_put_*conn() calls trace_rxrpc_conn() after they have done the decrement of the refcount - which looks at the debug_id in the connection record. But unless the refcount was reduced to zero, we no longer have the right to look in the record and, indeed, it may be deleted by some other thread. Fix this by getting the debug_id out before decrementing the refcount and then passing that into the tracepoint. Fixes: 363deeab6d0f ("rxrpc: Add connection tracepoint and client conn state tracepoint") Signed-off-by: David Howells

rxrpc: Fix lack of conn cleanup when local endpoint is cleaned up [ver #2]

2019-08-30T22:06:52Z

When a local endpoint is ceases to be in use, such as when the kafs module is unloaded, the kernel will emit an assertion failure if there are any outstanding client connections: rxrpc: Assertion failed ------------[ cut here ]------------ kernel BUG at net/rxrpc/local_object.c:433! and even beyond that, will evince other oopses if there are service connections still present. Fix this by: (1) Removing the triggering of connection reaping when an rxrpc socket is released. These don't actually clean up the connections anyway - and further, the local endpoint may still be in use through another socket. (2) Mark the local endpoint as dead when we start the process of tearing it down. (3) When destroying a local endpoint, strip all of its client connections from the idle list and discard the ref on each that the list was holding. (4) When destroying a local endpoint, call the service connection reaper directly (rather than through a workqueue) to immediately kill off all outstanding service connections. (5) Make the service connection reaper reap connections for which the local endpoint is marked dead. Only after destroying the connections can we close the socket lest we get an oops in a workqueue that's looking at a connection or a peer. Fixes: 3d18cbb7fd0c ("rxrpc: Fix conn expiry timers") Signed-off-by: David Howells Tested-by: Marc Dionne Signed-off-by: David S. Miller

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman

rxrpc: Drop the local endpoint arg from rxrpc_extract_addr_from_skb()

2018-10-04T08:32:28Z

rxrpc_extract_addr_from_skb() doesn't use the argument that points to the local endpoint, so remove the argument. Signed-off-by: David Howells

rxrpc: Use IPv4 addresses throught the IPv6

2018-10-04T08:32:28Z

AF_RXRPC opens an IPv6 socket through which to send and receive network packets, both IPv6 and IPv4. It currently turns AF_INET addresses into AF_INET-as-AF_INET6 addresses based on an assumption that this was necessary; on further inspection of the code, however, it turns out that the IPv6 code just farms packets aimed at AF_INET addresses out to the IPv4 code. Fix AF_RXRPC to use AF_INET addresses directly when given them. Fixes: 7b674e390e51 ("rxrpc: Fix IPv6 support") Signed-off-by: David Howells

rxrpc: Fix error distribution

2018-09-28T09:33:17Z

Fix error distribution by immediately delivering the errors to all the affected calls rather than deferring them to a worker thread. The problem with the latter is that retries and things can happen in the meantime when we want to stop that sooner. To this end: (1) Stop the error distributor from removing calls from the error_targets list so that peer->lock isn't needed to synchronise against other adds and removals. (2) Require the peer's error_targets list to be accessed with RCU, thereby avoiding the need to take peer->lock over distribution. (3) Don't attempt to affect a call's state if it is already marked complete. Signed-off-by: David Howells

rxrpc: Make service call handling more robust

2018-09-28T09:32:49Z

Make the following changes to improve the robustness of the code that sets up a new service call: (1) Cache the rxrpc_sock struct obtained in rxrpc_data_ready() to do a service ID check and pass that along to rxrpc_new_incoming_call(). This means that I can remove the check from rxrpc_new_incoming_call() without the need to worry about the socket attached to the local endpoint getting replaced - which would invalidate the check. (2) Cache the rxrpc_peer struct, thereby allowing the peer search to be done once. The peer is passed to rxrpc_new_incoming_call(), thereby saving the need to repeat the search. This also reduces the possibility of rxrpc_publish_service_conn() BUG()'ing due to the detection of a duplicate connection, despite the initial search done by rxrpc_find_connection_rcu() having turned up nothing. This BUG() shouldn't ever get hit since rxrpc_data_ready() *should* be non-reentrant and the result of the initial search should still hold true, but it has proven possible to hit. I *think* this may be due to __rxrpc_lookup_peer_rcu() cutting short the iteration over the hash table if it finds a matching peer with a zero usage count, but I don't know for sure since it's only ever been hit once that I know of. Another possibility is that a bug in rxrpc_data_ready() that checked the wrong byte in the header for the RXRPC_CLIENT_INITIATED flag might've let through a packet that caused a spurious and invalid call to be set up. That is addressed in another patch. (3) Fix __rxrpc_lookup_peer_rcu() to skip peer records that have a zero usage count rather than stopping and returning not found, just in case there's another peer record behind it in the bucket. (4) Don't search the peer records in rxrpc_alloc_incoming_call(), but rather either use the peer cached in (2) or, if one wasn't found, preemptively install a new one. Fixes: 8496af50eb38 ("rxrpc: Use RCU to access a peer's service connection tree") Signed-off-by: David Howells

rxrpc: Fix checks as to whether we should set up a new call

2018-09-28T09:31:20Z

There's a check in rxrpc_data_ready() that's checking the CLIENT_INITIATED flag in the packet type field rather than in the packet flags field. Fix this by creating a pair of helper functions to check whether the packet is going to the client or to the server and use them generally. Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code") Signed-off-by: David Howells