wireguard-linux/net/sched, branch jd/orphan-parallel

net: protect tcf_block_unbind with block lock

2020-10-28T00:58:36Z

The tcf_block_unbind() expects that the caller will take block->cb_lock before calling it, however the code took RTNL lock and dropped cb_lock instead. This causes to the following kernel panic. WARNING: CPU: 1 PID: 13524 at net/sched/cls_api.c:1488 tcf_block_unbind+0x2db/0x420 Modules linked in: mlx5_ib mlx5_core mlxfw ptp pps_core act_mirred act_tunnel_key cls_flower vxlan ip6_udp_tunnel udp_tunnel dummy sch_ingress openvswitch nsh xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad ib_ipoib rdma_cm iw_cm ib_cm ib_uverbs ib_core overlay [last unloaded: mlxfw] CPU: 1 PID: 13524 Comm: test-ecmp-add-v Tainted: G W 5.9.0+ #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:tcf_block_unbind+0x2db/0x420 Code: ff 48 83 c4 40 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8d bc 24 30 01 00 00 be ff ff ff ff e8 7d 7f 70 00 85 c0 0f 85 7b fd ff ff <0f> 0b e9 74 fd ff ff 48 c7 c7 dc 6a 24 84 e8 02 ec fe fe e9 55 fd RSP: 0018:ffff888117d17968 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88812f713c00 RCX: 1ffffffff0848d5b RDX: 0000000000000001 RSI: ffff88814fbc8130 RDI: ffff888107f2b878 RBP: 1ffff11022fa2f3f R08: 0000000000000000 R09: ffffffff84115a87 R10: fffffbfff0822b50 R11: ffff888107f2b898 R12: ffff88814fbc8000 R13: ffff88812f713c10 R14: ffff888117d17a38 R15: ffff88814fbc80c0 FS: 00007f6593d36740(0000) GS:ffff8882a4f00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005607a00758f8 CR3: 0000000131aea006 CR4: 0000000000170ea0 Call Trace: tc_block_indr_cleanup+0x3e0/0x5a0 ? tcf_block_unbind+0x420/0x420 ? __mutex_unlock_slowpath+0xe7/0x610 flow_indr_dev_unregister+0x5e2/0x930 ? mlx5e_restore_tunnel+0xdf0/0xdf0 [mlx5_core] ? mlx5e_restore_tunnel+0xdf0/0xdf0 [mlx5_core] ? flow_indr_block_cb_alloc+0x3c0/0x3c0 ? mlx5_db_free+0x37c/0x4b0 [mlx5_core] mlx5e_cleanup_rep_tx+0x8b/0xc0 [mlx5_core] mlx5e_detach_netdev+0xe5/0x120 [mlx5_core] mlx5e_vport_rep_unload+0x155/0x260 [mlx5_core] esw_offloads_disable+0x227/0x2b0 [mlx5_core] mlx5_eswitch_disable_locked.cold+0x38e/0x699 [mlx5_core] mlx5_eswitch_disable+0x94/0xf0 [mlx5_core] mlx5_device_disable_sriov+0x183/0x1f0 [mlx5_core] mlx5_core_sriov_configure+0xfd/0x230 [mlx5_core] sriov_numvfs_store+0x261/0x2f0 ? sriov_drivers_autoprobe_store+0x110/0x110 ? sysfs_file_ops+0x170/0x170 ? sysfs_file_ops+0x117/0x170 ? sysfs_file_ops+0x170/0x170 kernfs_fop_write+0x1ff/0x3f0 ? rcu_read_lock_any_held+0x6e/0x90 vfs_write+0x1f3/0x620 ksys_write+0xf9/0x1d0 ? __x64_sys_read+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x273/0x3f0 ? syscall_enter_from_user_mode+0x1d/0x50 do_syscall_64+0x2d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 <...> ---[ end trace bfdd028ada702879 ]--- Fixes: 0fdcf78d5973 ("net: use flow_indr_dev_setup_offload()") Signed-off-by: Leon Romanovsky Link: https://lore.kernel.org/r/20201026123327.1141066-1-leon@kernel.org Signed-off-by: Jakub Kicinski

net/sched: act_mpls: Add softdep on mpls_gso.ko

2020-10-28T00:17:06Z

TCA_MPLS_ACT_PUSH and TCA_MPLS_ACT_MAC_PUSH might be used on gso packets. Such packets will thus require mpls_gso.ko for segmentation. v2: Drop dependency on CONFIG_NET_MPLS_GSO in Kconfig (from Jakub and David). Fixes: 2a2ea50870ba ("net: sched: add mpls manipulation actions to TC") Signed-off-by: Guillaume Nault Link: https://lore.kernel.org/r/1f6cab15bbd15666795061c55563aaf6a386e90e.1603708007.git.gnault@redhat.com Signed-off-by: Jakub Kicinski

net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN tunnels

2020-10-21T04:10:41Z

the following command # tc action add action tunnel_key \ > set src_ip 2001:db8::1 dst_ip 2001:db8::2 id 10 erspan_opts 1:6789:0:0 generates the following splat: BUG: KASAN: slab-out-of-bounds in tunnel_key_copy_opts+0xcc9/0x1010 [act_tunnel_key] Write of size 4 at addr ffff88813f5f1cc8 by task tc/873 CPU: 2 PID: 873 Comm: tc Not tainted 5.9.0+ #282 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 Call Trace: dump_stack+0x99/0xcb print_address_description.constprop.7+0x1e/0x230 kasan_report.cold.13+0x37/0x7c tunnel_key_copy_opts+0xcc9/0x1010 [act_tunnel_key] tunnel_key_init+0x160c/0x1f40 [act_tunnel_key] tcf_action_init_1+0x5b5/0x850 tcf_action_init+0x15d/0x370 tcf_action_add+0xd9/0x2f0 tc_ctl_action+0x29b/0x3a0 rtnetlink_rcv_msg+0x341/0x8d0 netlink_rcv_skb+0x120/0x380 netlink_unicast+0x439/0x630 netlink_sendmsg+0x719/0xbf0 sock_sendmsg+0xe2/0x110 ____sys_sendmsg+0x5ba/0x890 ___sys_sendmsg+0xe9/0x160 __sys_sendmsg+0xd3/0x170 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f872a96b338 Code: 89 02 48 c7 c0 ff ff ff ff eb b5 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 25 43 2c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 41 89 d4 55 RSP: 002b:00007ffffe367518 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000000005f8f5aed RCX: 00007f872a96b338 RDX: 0000000000000000 RSI: 00007ffffe367580 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000001 R09: 000000000000001c R10: 000000000000000b R11: 0000000000000246 R12: 0000000000000001 R13: 0000000000686760 R14: 0000000000000601 R15: 0000000000000000 Allocated by task 873: kasan_save_stack+0x19/0x40 __kasan_kmalloc.constprop.7+0xc1/0xd0 __kmalloc+0x151/0x310 metadata_dst_alloc+0x20/0x40 tunnel_key_init+0xfff/0x1f40 [act_tunnel_key] tcf_action_init_1+0x5b5/0x850 tcf_action_init+0x15d/0x370 tcf_action_add+0xd9/0x2f0 tc_ctl_action+0x29b/0x3a0 rtnetlink_rcv_msg+0x341/0x8d0 netlink_rcv_skb+0x120/0x380 netlink_unicast+0x439/0x630 netlink_sendmsg+0x719/0xbf0 sock_sendmsg+0xe2/0x110 ____sys_sendmsg+0x5ba/0x890 ___sys_sendmsg+0xe9/0x160 __sys_sendmsg+0xd3/0x170 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff88813f5f1c00 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 200 bytes inside of 256-byte region [ffff88813f5f1c00, ffff88813f5f1d00) The buggy address belongs to the page: page:0000000011b48a19 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x13f5f0 head:0000000011b48a19 order:1 compound_mapcount:0 flags: 0x17ffffc0010200(slab|head) raw: 0017ffffc0010200 0000000000000000 0000000d00000001 ffff888107c43400 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88813f5f1b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88813f5f1c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff88813f5f1c80: 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc ^ ffff88813f5f1d00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88813f5f1d80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc using IPv6 tunnels, act_tunnel_key allocates a fixed amount of memory for the tunnel metadata, but then it expects additional bytes to store tunnel specific metadata with tunnel_key_copy_opts(). Fix the arguments of __ipv6_tun_set_dst(), so that 'md_size' contains the size previously computed by tunnel_key_get_opts_len(), like it's done for IPv4 tunnels. Fixes: 0ed5269f9e41 ("net/sched: add tunnel option support to act_tunnel_key") Reported-by: Shuang Li Signed-off-by: Davide Caratti Acked-by: Cong Wang Link: https://lore.kernel.org/r/36ebe969f6d13ff59912d6464a4356fe6f103766.1603231100.git.dcaratti@redhat.com Signed-off-by: Jakub Kicinski

net/sched: act_gate: Unlock ->tcfa_lock in tc_setup_flow_action()

2020-10-21T04:00:52Z

We need to jump to the "err_out_locked" label when tcf_gate_get_entries() fails. Otherwise, tc_setup_flow_action() exits with ->tcfa_lock still held. Fixes: d29bdd69ecdd ("net: schedule: add action gate offloading") Signed-off-by: Guillaume Nault Acked-by: Cong Wang Link: https://lore.kernel.org/r/12f60e385584c52c22863701c0185e40ab08a7a7.1603207948.git.gnault@redhat.com Signed-off-by: Jakub Kicinski

net/sched: act_ct: Fix adding udp port mangle operation

2020-10-20T23:15:51Z

Need to use the udp header type and not tcp. Fixes: 9c26ba9b1f45 ("net/sched: act_ct: Instantiate flow table entry actions") Signed-off-by: Roi Dayan Reviewed-by: Paul Blakey Link: https://lore.kernel.org/r/20201019090244.3015186-1-roid@nvidia.com Signed-off-by: Jakub Kicinski

net/sched: get rid of qdisc->padded

2020-10-09T15:08:08Z

kmalloc() of sufficiently big portion of memory is cache-aligned in regular conditions. If some debugging options are used, there is no reason qdisc structures would need 64-byte alignment if most other kernel structures are not aligned. This get rid of QDISC_ALIGN and QDISC_ALIGNTO. Addition of privdata field will help implementing the reverse of qdisc_priv() and documents where the private data is. Signed-off-by: Eric Dumazet Cc: Allen Pais Acked-by: Cong Wang Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2020-10-06T01:40:01Z

Rejecting non-native endian BTF overlapped with the addition of support for it. The rest were more simple overlapping changes, except the renesas ravb binding update, which had to follow a file move as well as a YAML conversion. Signed-off-by: David S. Miller

net_sched: check error pointer in tcf_dump_walker()

2020-10-04T21:53:06Z

Although we take RTNL on dump path, it is possible to skip RTNL on insertion path. So the following race condition is possible: rtnl_lock() // no rtnl lock mutex_lock(&idrinfo->lock); // insert ERR_PTR(-EBUSY) mutex_unlock(&idrinfo->lock); tc_dump_action() rtnl_unlock() So we have to skip those temporary -EBUSY entries on dump path too. Reported-and-tested-by: syzbot+b47bc4f247856fb4d9e1@syzkaller.appspotmail.com Fixes: 0fedc63fadf0 ("net_sched: commit action insertions together") Cc: Vlad Buslov Cc: Jamal Hadi Salim Cc: Jiri Pirko Signed-off-by: Cong Wang Signed-off-by: David S. Miller

net/sched: act_mpls: Add action to push MPLS LSE before Ethernet header

2020-10-04T00:28:45Z

Define the MAC_PUSH action which pushes an MPLS LSE before the mac header (instead of between the mac and the network headers as the plain PUSH action does). The only special case is when the skb has an offloaded VLAN. In that case, it has to be inlined before pushing the MPLS header. Signed-off-by: Guillaume Nault Signed-off-by: David S. Miller

net/sched: act_vlan: Add {POP,PUSH}_ETH actions

2020-10-04T00:28:45Z

Implement TCA_VLAN_ACT_POP_ETH and TCA_VLAN_ACT_PUSH_ETH, to respectively pop and push a base Ethernet header at the beginning of a frame. POP_ETH is just a matter of pulling ETH_HLEN bytes. VLAN tags, if any, must be stripped before calling POP_ETH. PUSH_ETH is restricted to skbs with no mac_header, and only the MAC addresses can be configured. The Ethertype is automatically set from skb->protocol. These restrictions ensure that all skb's fields remain consistent, so that this action can't confuse other part of the networking stack (like GSO). Since openvswitch already had these actions, consolidate the code in skbuff.c (like for vlan and mpls push/pop). Signed-off-by: Guillaume Nault Signed-off-by: David S. Miller