wireguard-linux/tools/perf/util/stat-display.c, branch jd/unified-crypt-queue

perf stat: Align the output for interval aggregation mode

2020-03-24T12:37:27Z

There is a slight misalignment in -A -I output. For example: # perf stat -e cpu/event=cpu-cycles/ -a -A -I 1000 # time CPU counts unit events 1.000440863 CPU0 1,068,388 cpu/event=cpu-cycles/ 1.000440863 CPU1 875,954 cpu/event=cpu-cycles/ 1.000440863 CPU2 3,072,538 cpu/event=cpu-cycles/ 1.000440863 CPU3 4,026,870 cpu/event=cpu-cycles/ 1.000440863 CPU4 5,919,630 cpu/event=cpu-cycles/ 1.000440863 CPU5 2,714,260 cpu/event=cpu-cycles/ 1.000440863 CPU6 2,219,240 cpu/event=cpu-cycles/ 1.000440863 CPU7 1,299,232 cpu/event=cpu-cycles/ The value of counts is not aligned with the column "counts" and the event name is not aligned with the column "events". With this patch, the output is, # perf stat -e cpu/event=cpu-cycles/ -a -A -I 1000 # time CPU counts unit events 1.000423009 CPU0 997,421 cpu/event=cpu-cycles/ 1.000423009 CPU1 1,422,042 cpu/event=cpu-cycles/ 1.000423009 CPU2 484,651 cpu/event=cpu-cycles/ 1.000423009 CPU3 525,791 cpu/event=cpu-cycles/ 1.000423009 CPU4 1,370,100 cpu/event=cpu-cycles/ 1.000423009 CPU5 442,072 cpu/event=cpu-cycles/ 1.000423009 CPU6 205,643 cpu/event=cpu-cycles/ 1.000423009 CPU7 1,302,250 cpu/event=cpu-cycles/ Now output is aligned. Signed-off-by: Jin Yao Acked-by: Jiri Olsa Tested-by: Arnaldo Carvalho de Melo Cc: Alexander Shishkin Cc: Andi Kleen Cc: Kan Liang Cc: Peter Zijlstra Link: http://lore.kernel.org/lkml/20200218071614.25736-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo

perf util: Factor out sysctl__nmi_watchdog_enabled()

2020-03-10T17:46:19Z

The NMI watchdog status is required for metric group constraint examination. Factor out sysctl__nmi_watchdog_enabled() to retrieve the NMI watchdog status. Users may count more than one metric group each time. If so, the NMI watchdog status may be retrieved several times. To reduce the overhead, cache the NMI watchdog status. Replace the NMI watchdog status checking in print_footer() by sysctl__nmi_watchdog_enabled(). Suggested-by: Andi Kleen Signed-off-by: Kan Liang Acked-by: Jiri Olsa Cc: Andi Kleen Cc: Jin Yao Cc: Mark Rutland Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Ravi Bangoria Link: http://lore.kernel.org/lkml/1582581564-184429-4-git-send-email-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo

perf stat: Show percore counts in per CPU output

2020-03-04T13:34:09Z

We have supported the event modifier "percore" which sums up the event counts for all hardware threads in a core and show the counts per core. For example, # perf stat -e cpu/event=cpu-cycles,percore/ -a -A -- sleep 1 Performance counter stats for 'system wide': S0-D0-C0 395,072 cpu/event=cpu-cycles,percore/ S0-D0-C1 851,248 cpu/event=cpu-cycles,percore/ S0-D0-C2 954,226 cpu/event=cpu-cycles,percore/ S0-D0-C3 1,233,659 cpu/event=cpu-cycles,percore/ This patch provides a new option "--percore-show-thread". It is used with event modifier "percore" together to sum up the event counts for all hardware threads in a core but show the counts per hardware thread. This is essentially a replacement for the any bit (which is gone in Icelake). Per core counts are useful for some formulas, e.g. CoreIPC. The original percore version was inconvenient to post process. This variant matches the output of the any bit. With this patch, for example, # perf stat -e cpu/event=cpu-cycles,percore/ -a -A --percore-show-thread -- sleep 1 Performance counter stats for 'system wide': CPU0 2,453,061 cpu/event=cpu-cycles,percore/ CPU1 1,823,921 cpu/event=cpu-cycles,percore/ CPU2 1,383,166 cpu/event=cpu-cycles,percore/ CPU3 1,102,652 cpu/event=cpu-cycles,percore/ CPU4 2,453,061 cpu/event=cpu-cycles,percore/ CPU5 1,823,921 cpu/event=cpu-cycles,percore/ CPU6 1,383,166 cpu/event=cpu-cycles,percore/ CPU7 1,102,652 cpu/event=cpu-cycles,percore/ We can see counts are duplicated in CPU pairs (CPU0/CPU4, CPU1/CPU5, CPU2/CPU6, CPU3/CPU7). The interval mode also works. For example, # perf stat -e cpu/event=cpu-cycles,percore/ -a -A --percore-show-thread -I 1000 # time CPU counts unit events 1.000425421 CPU0 925,032 cpu/event=cpu-cycles,percore/ 1.000425421 CPU1 430,202 cpu/event=cpu-cycles,percore/ 1.000425421 CPU2 436,843 cpu/event=cpu-cycles,percore/ 1.000425421 CPU3 1,192,504 cpu/event=cpu-cycles,percore/ 1.000425421 CPU4 925,032 cpu/event=cpu-cycles,percore/ 1.000425421 CPU5 430,202 cpu/event=cpu-cycles,percore/ 1.000425421 CPU6 436,843 cpu/event=cpu-cycles,percore/ 1.000425421 CPU7 1,192,504 cpu/event=cpu-cycles,percore/ If we offline CPU5, the result is: # perf stat -e cpu/event=cpu-cycles,percore/ -a -A --percore-show-thread -- sleep 1 Performance counter stats for 'system wide': CPU0 2,752,148 cpu/event=cpu-cycles,percore/ CPU1 1,009,312 cpu/event=cpu-cycles,percore/ CPU2 2,784,072 cpu/event=cpu-cycles,percore/ CPU3 2,427,922 cpu/event=cpu-cycles,percore/ CPU4 2,752,148 cpu/event=cpu-cycles,percore/ CPU6 2,784,072 cpu/event=cpu-cycles,percore/ CPU7 2,427,922 cpu/event=cpu-cycles,percore/ 1.001416041 seconds time elapsed v4: --- Ravi Bangoria reports an issue in v3. Once we offline a CPU, the output is not correct. The issue is we should use the cpu idx in print_percore_thread rather than using the cpu value. v3: --- 1. Fix the interval mode output error 2. Use cpu value (not cpu index) in config->aggr_get_id(). 3. Refine the code according to Jiri's comments. v2: --- Add the explanation in change log. This is essentially a replacement for the any bit. No code change. Signed-off-by: Jin Yao Tested-by: Ravi Bangoria Acked-by: Jiri Olsa Cc: Alexander Shishkin Cc: Andi Kleen Cc: Kan Liang Cc: Peter Zijlstra Link: http://lore.kernel.org/lkml/20200214080452.26402-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo

perf stat: Add --per-node agregation support

2019-11-06T18:49:39Z

Adding new --per-node option to aggregate counts per NUMA nodes for system-wide mode measurements. You can specify --per-node in live mode: # perf stat -a -I 1000 -e cycles --per-node # time node cpus counts unit events 1.000542550 N0 20 6,202,097 cycles 1.000542550 N1 20 639,559 cycles 2.002040063 N0 20 7,412,495 cycles 2.002040063 N1 20 2,185,577 cycles 3.003451699 N0 20 6,508,917 cycles 3.003451699 N1 20 765,607 cycles ... Or in the record/report stat session: # perf stat record -a -I 1000 -e cycles # time counts unit events 1.000536937 10,008,468 cycles 2.002090152 9,578,539 cycles 3.003625233 7,647,869 cycles 4.005135036 7,032,086 cycles ^C 4.340902364 3,923,893 cycles # perf stat report --per-node # time node cpus counts unit events 1.000536937 N0 20 9,355,086 cycles 1.000536937 N1 20 653,382 cycles 2.002090152 N0 20 7,712,838 cycles 2.002090152 N1 20 1,865,701 cycles 3.003625233 N0 20 6,604,441 cycles 3.003625233 N1 20 1,043,428 cycles 4.005135036 N0 20 6,350,522 cycles 4.005135036 N1 20 681,564 cycles 4.340902364 N0 20 3,403,188 cycles 4.340902364 N1 20 520,705 cycles Signed-off-by: Jiri Olsa Cc: Alexander Shishkin Cc: Alexey Budankov Cc: Andi Kleen Cc: Joe Mario Cc: Kan Liang Cc: Michael Petlan Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20190904073415.723-4-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf auxtrace: Uninline functions that touch perf_session

2019-09-01T01:24:10Z

So that we don't carry the session.h include directive in auxtrace.h, which in turn opens a can of worms of files that were getting all sorts of things via that include, fix them all. Cc: Adrian Hunter Cc: Jiri Olsa Cc: Namhyung Kim Link: https://lkml.kernel.org/n/tip-d2d83aovpgri2z75wlitquni@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Remove duplicate headers

2019-08-26T14:58:29Z

Removed headers which are included twice. Signed-off-by: Souptick Joarder Reviewed-by: Mukesh Ojha Cc: Andrew Morton Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1566663319-4283-1-git-send-email-jrdr.linux@gmail.com Signed-off-by: Arnaldo Carvalho de Melo

libperf: Add perf_thread_map__nr/perf_thread_map__pid functions

2019-08-22T20:16:57Z

So it's part of libperf library as basic functions operating on perf_thread_map objects. Signed-off-by: Jiri Olsa Cc: Alexander Shishkin Cc: Michael Petlan Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20190822111141.25823-6-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf stat: Add missing counts.h

2019-08-22T20:16:57Z

It is getting this via evsel.h, that don't strictly need counts.h, just forward declarations for some structs, so add it here before we remove it from there. Cc: Adrian Hunter Cc: Jiri Olsa Cc: Namhyung Kim Link: https://lkml.kernel.org/n/tip-jwcbm9gv9llloe3he5qkdefs@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Use perf_cpu_map__nr instead of cpu_map__nr

2019-08-22T14:14:54Z

Switch the rest of the perf code to use libperf's perf_cpu_map__nr(), which is the same as current cpu_map__nr() and remove the cpu_map__nr() function. Link: http://lkml.kernel.org/n/tip-6e0guy75clis7nm0xpuz9fga@git.kernel.org Signed-off-by: Jiri Olsa Cc: Alexander Shishkin Cc: Michael Petlan Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20190822111141.25823-3-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo

libperf: Move nr_members from perf's evsel to libperf's perf_evsel

2019-07-29T21:34:46Z

Move the nr_members member from perf's evsel to libperf's perf_evsel. Signed-off-by: Jiri Olsa Cc: Alexander Shishkin Cc: Alexey Budankov Cc: Andi Kleen Cc: Michael Petlan Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20190721112506.12306-60-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo