wireguard-linux/tools/power/cpupower/utils, branch update-toolchain

cpupower: Change the var type of the 'monitor' subcommand display mode

2024-06-20T16:08:08Z

There is a type 'enum operation_mode_e' contains the display modes of the 'monitor' subcommand. This type isn't used though, instead the variable 'mode' is of a simple 'int' type. Change 'mode' variable type from 'int' to 'enum operation_mode_e' in order to improve compiler type checking. Built and tested this with different monitor cmdline params. Everything works as expected, that is nothing changed and no regressions encountered. Signed-off-by: Roman Storozhenko Signed-off-by: Shuah Khan

tools/power/cpupower: Fix Pstate frequency reporting on AMD Family 1Ah CPUs

2024-05-28T15:22:57Z

Update cpupower's P-State frequency calculation and reporting with AMD Family 1Ah+ processors, when using the acpi-cpufreq driver. This is due to a change in the PStateDef MSR layout in AMD Family 1Ah+. Tested on 4th and 5th Gen AMD EPYC system Signed-off-by: Ananth Narayan Signed-off-by: Dhananjay Ugwekar Reviewed-by: Mario Limonciello Signed-off-by: Shuah Khan

cpupower: Fix cpuidle_set to accept only numeric values for idle-set operation.

2023-07-18T22:07:08Z

For both the d and e options in 'cpupower idle_set' command, an atoi() conversion is done without checking if the input argument is all numeric. So, an atoi conversion is done on any character provided as input and the CPU idle_set operation continues with that integer value, which may not be what is intended or entirely correct. The output of cpuidle-set before patch is as follows: [root@xxx cpupower]# cpupower idle-set -e 1$ Idlestate 1 enabled on CPU 0 [snip] Idlestate 1 enabled on CPU 47 [root@xxx cpupower]# cpupower idle-set -e 11 Idlestate 11 not available on CPU 0 [snip] Idlestate 11 not available on CPU 47 [root@xxx cpupower]# cpupower idle-set -d 12 Idlestate 12 not available on CPU 0 [snip] Idlestate 12 not available on CPU 47 [root@xxx cpupower]# cpupower idle-set -d qw Idlestate 0 disabled on CPU 0 [snip] Idlestate 0 disabled on CPU 47 This patch adds a check for both d and e options in cpuidle-set.c to see that the idle_set value is all numeric before doing a string-to-int conversion using strtol(). The output of cpuidle-set after the patch is as below: [root@xxx cpupower]# ./cpupower idle-set -e 1$ Bad idle_set value: 1$. Integer expected [root@xxx cpupower]# ./cpupower idle-set -e 11 Idlestate 11 not available on CPU 0 [snip] Idlestate 11 not available on CPU 47 [root@xxx cpupower]# ./cpupower idle-set -d 12 Idlestate 12 not available on CPU 0 [snip] Idlestate 12 not available on CPU 47 [root@xxx cpupower]# ./cpupower idle-set -d qw Bad idle_set value: qw. Integer expected Signed-off-by: Brahadambal Srinivasan Signed-off-by: Likhitha Korrapati Tested-by: Pavithra Prakash Reviewed-by: Rick Lindsley Signed-off-by: Shuah Khan

cpupower: Add turbo-boost support in cpupower

2023-07-18T22:07:01Z

If boost sysfs (/sys/devices/system/cpu/cpufreq/boost) file is present turbo-boost is feature is supported in the hardware. By default this feature should be enabled. But to disable/enable it write to the sysfs file. Use the same to control this feature via cpupower. To enable: cpupower set --turbo-boost 1 To disable: cpupower set --turbo-boost 0 Acked-by: Huang Rui Reviewed-by: Gautham R. Shenoy Reviewed-by: Mario Limonciello Signed-off-by: Wyes Karny Tested-by: Perry Yuan Signed-off-by: Shuah Khan

cpupower: Add support for amd_pstate mode change

2023-07-18T22:06:56Z

amd_pstate supports changing of its mode dynamically via `status` sysfs file. Add the same capability in cpupower. To change the mode to active mode use below command: cpupower set --amd-pstate-mode active Acked-by: Huang Rui Reviewed-by: Gautham R. Shenoy Reviewed-by: Mario Limonciello Signed-off-by: Wyes Karny Tested-by: Perry Yuan Signed-off-by: Shuah Khan

cpupower: Add EPP value change support

2023-07-18T22:06:49Z

amd_pstate and intel_pstate active mode drivers support energy performance preference feature. Through this user can convey it's energy/performance preference to platform. Add this value change capability to cpupower. To change the EPP value use below command: cpupower set --epp performance Reviewed-by: Mario Limonciello Signed-off-by: Wyes Karny Tested-by: Perry Yuan Acked-by: Huang Rui Signed-off-by: Shuah Khan

cpupower: Recognise amd-pstate active mode driver

2023-07-18T22:06:36Z

amd-pstate active mode driver name is "amd-pstate-epp". Use common prefix for string matching condition to recognise amd-pstate active mode driver. Reviewed-by: Gautham R. Shenoy Signed-off-by: Wyes Karny Reviewed-by: Mario Limonciello Tested-by: Perry Yuan Acked-by: Huang Rui Signed-off-by: Shuah Khan

cpupower: Make TSC read per CPU for Mperf monitor

2023-05-08T16:46:49Z

System-wide TSC read could cause a drift in C0 percentage calculation. Because if first TSC is read and then one by one mperf is read for all cpus, this introduces drift between mperf reading of later CPUs and TSC reading. To lower this drift read TSC per CPU and also just after mperf read. This technique improves C0 percentage calculation in Mperf monitor. Before fix: (System 100% busy) | Mperf || RAPL || Idle_Stats PKG|CORE| CPU| C0 | Cx | Freq || pack | core || POLL | C1 | C2 0| 0| 0| 87.15| 12.85| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 0| 256| 84.62| 15.38| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 1| 1| 87.15| 12.85| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 1| 257| 84.08| 15.92| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 2| 2| 86.61| 13.39| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 2| 258| 83.26| 16.74| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 3| 3| 86.61| 13.39| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 3| 259| 83.60| 16.40| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 4| 4| 86.33| 13.67| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 4| 260| 83.33| 16.67| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 5| 5| 86.06| 13.94| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 5| 261| 83.05| 16.95| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 6| 6| 85.51| 14.49| 2695||168659003|3970468|| 0.00| 0.00| 0.00 After fix: (System 100% busy) | Mperf || RAPL || Idle_Stats PKG|CORE| CPU| C0 | Cx | Freq || pack | core || POLL | C1 | C2 0| 0| 0| 98.03| 1.97| 2415||163295480|3811189|| 0.00| 0.00| 0.00 0| 0| 256| 98.50| 1.50| 2394||163295480|3811189|| 0.00| 0.00| 0.00 0| 1| 1| 99.99| 0.01| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 1| 257| 99.99| 0.01| 2375||163295480|3811189|| 0.00| 0.00| 0.00 0| 2| 2| 99.99| 0.01| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 2| 258|100.00| 0.00| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 3| 3|100.00| 0.00| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 3| 259| 99.99| 0.01| 2435||163295480|3811189|| 0.00| 0.00| 0.00 0| 4| 4|100.00| 0.00| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 4| 260|100.00| 0.00| 2435||163295480|3811189|| 0.00| 0.00| 0.00 0| 5| 5| 99.99| 0.01| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 5| 261|100.00| 0.00| 2435||163295480|3811189|| 0.00| 0.00| 0.00 0| 6| 6|100.00| 0.00| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 6| 262|100.00| 0.00| 2435||163295480|3811189|| 0.00| 0.00| 0.00 Cc: Thomas Renninger Cc: Shuah Khan Cc: Dominik Brodowski Fixes: 7fe2f6399a84 ("cpupowerutils - cpufrequtils extended with quite some features") Signed-off-by: Wyes Karny Signed-off-by: Shuah Khan

cpupower: rapl monitor - shows the used power consumption in uj for each rapl domain

2022-11-30T23:48:34Z

This CPU power monitor shows the power consumption as exposed by the powercap subsystem, cmp with: Documentation/power/powercap/powercap.rst cpupower monitor -m RAPL | RAPL CPU| pack | core | unco 0|6853926|967832|442381 8|6853926|967832|442381 1|6853926|967832|442381 9|6853926|967832|442381 Unfortunately RAPL domains cannot be directly mapped to the corresponding CPU socket/package, core it belongs to. Not sure this is possible at all with the current data exposed from the kernel. Still it can be worthful information for developers trying to optimize power consumption of workloads or their system in general. Signed-off-by: Thomas Renninger CC: Zhang Rui CC: Shuah Khan Signed-off-by: Shuah Khan

cpupower: Introduce powercap intel-rapl library and powercap-info command

2022-11-30T23:48:28Z

Read out powercap zone information via: cpupower powercap-info and show the zone hierarchy to the user: ./cpupower powercap-info Driver: intel-rapl Powercap domain hierarchy: Zone: package-0 (enabled) Power consumption can be monitored in micro Watts Zone: core (disabled) Power consumption can be monitored in micro Watts Zone: uncore (disabled) Power consumption can be monitored in micro Watts Zone: dram (disabled) Power consumption can be monitored in micro Watts There is a dummy -a option for powercap-info which can/should be used to show more detailed info later. Like that other args can be added easily later as well. A enable/disable option via powercap-set subcommand is also an enhancement for later. Also not all RAPL domains are shown. The func walking through RAPL subdomains is restricted and hardcoded to: "intel-rapl/intel-rapl:0" On my system above powercap domains map to: intel-rapl/intel-rapl:0 -> pack (age-0) intel-rapl/intel-rapl:0/intel-rapl:0:0 -> core intel-rapl/intel-rapl:0/intel-rapl:0:1 -> uncore Missing ones on my system are: intel-rapl-mmio/intel-rapl-mmio:0 -> pack (age-0) intel-rapl/intel-rapl:1 -> psys This could get enhanced in: struct powercap_zone *powercap_init_zones() and adopted to walk through all intel-rapl zones, but also to other powercap drivers like dtpm (Dynamic Thermal Power Management framework), cmp with: drivers/powercap/dtpm_* Signed-off-by: Thomas Renninger CC: Shuah Khan Signed-off-by: Shuah Khan