diff options
| author |   Wadim Egorov <w.egorov@phytec.de> | 2025-03-05 09:55:34 +0100 |
|---|---|---|
| committer |   Vignesh Raghavendra <vigneshr@ti.com> | 2025-03-07 18:48:05 +0530 |
| commit | 2285ea3f8065f47a6a1b62e6fcfa85105c8c261b (patch) | |
| tree | 48a3012bfc2096eedc44170d3244f292e03918f1 | |
| parent | arm64: dts: ti: k3-am62x-phyboard-lyra: Add boot phase tags (diff) | |
| download | wireguard-linux-2285ea3f8065f47a6a1b62e6fcfa85105c8c261b.tar.xz wireguard-linux-2285ea3f8065f47a6a1b62e6fcfa85105c8c261b.zip | |
arm64: dts: ti: k3-am62a-phycore-som: Add boot phase tags
The bootph-all and bootph-pre-ram tags were introduced in dt-schema
(dtschema/schemas/bootph.yaml) to define node usage across different
boot phases.
Add boot phase tags to all required nodes to ensure boot support from
all sources, including UART, USB (DFU), Ethernet, uSD card, eMMC, and
OSPI NOR Flash.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20250305085537.3976579-2-w.egorov@phytec.de
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Diffstat (limited to '')
| -rw-r--r-- | arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi | 16 |
1 files changed, 16 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi index a5aceaa39670..7920559e84a3 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi @@ -42,6 +42,7 @@ device_type = "memory"; /* 2G RAM */ reg = <0x00000000 0x80000000 0x00000000 0x80000000>; + bootph-all; }; reserved-memory { @@ -99,6 +100,7 @@ AM62AX_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (D17) I2C0_SCL */ AM62AX_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (E16) I2C0_SDA */ >; + bootph-all; }; main_mdio1_pins_default: main-mdio1-default-pins { @@ -106,6 +108,7 @@ AM62AX_IOPAD(0x160, PIN_OUTPUT, 0) /* (V12) MDIO0_MDC */ AM62AX_IOPAD(0x15c, PIN_INPUT, 0) /* (V13) MDIO0_MDIO */ >; + bootph-all; }; main_mmc0_pins_default: main-mmc0-default-pins { @@ -121,6 +124,7 @@ AM62AX_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (W9) MMC0_DAT6 */ AM62AX_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AB8) MMC0_DAT7 */ >; + bootph-all; }; main_rgmii1_pins_default: main-rgmii1-default-pins { @@ -138,6 +142,7 @@ AM62AX_IOPAD(0x130, PIN_OUTPUT, 0) /* (AB17) RGMII1_TXC */ AM62AX_IOPAD(0x12c, PIN_OUTPUT, 0) /* (W16) RGMII1_TX_CTL */ >; + bootph-all; }; ospi0_pins_default: ospi0-default-pins { @@ -155,6 +160,7 @@ AM62AX_IOPAD(0x028, PIN_INPUT, 0) /* (J22) OSPI0_D7 */ AM62AX_IOPAD(0x008, PIN_INPUT, 0) /* (L21) OSPI0_DQS */ >; + bootph-all; }; pmic_irq_pins_default: pmic-irq-default-pins { @@ -168,11 +174,13 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_rgmii1_pins_default>; + status = "okay"; }; &cpsw_port1 { phy-mode = "rgmii-rxid"; phy-handle = <&cpsw3g_phy1>; + bootph-all; }; &cpsw3g_mdio { @@ -182,6 +190,7 @@ cpsw3g_phy1: ethernet-phy@1 { compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22"; reg = <1>; + bootph-all; ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; @@ -196,6 +205,7 @@ pinctrl-names = "default"; pinctrl-0 = <&main_i2c0_pins_default>; clock-frequency = <400000>; + bootph-all; status = "okay"; pmic@30 { @@ -302,6 +312,10 @@ status = "okay"; }; +&main_pktdma { + bootph-all; +}; + &ospi0 { pinctrl-names = "default"; pinctrl-0 = <&ospi0_pins_default>; @@ -318,6 +332,7 @@ cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <0>; + bootph-all; }; }; @@ -326,5 +341,6 @@ pinctrl-0 = <&main_mmc0_pins_default>; disable-wp; non-removable; + bootph-all; status = "okay"; }; |