diff options
| author |   Abel Vesa <abel.vesa@linaro.org> | 2025-01-07 15:15:16 +0200 |
|---|---|---|
| committer |   Bjorn Andersson <andersson@kernel.org> | 2025-01-07 10:41:53 -0600 |
| commit | 680421056216efe727ff4ed48f481691d5873b9e (patch) | |
| tree | 86ba96ea5aee4fc6b20cc66ba77bd0a6b422c246 | |
| parent | arm64: dts: qcom: x1e78100-t14s: Enable fingerprint reader (diff) | |
| download | wireguard-linux-680421056216efe727ff4ed48f481691d5873b9e.tar.xz wireguard-linux-680421056216efe727ff4ed48f481691d5873b9e.zip | |
arm64: dts: qcom: x1e80100: Fix usb_2 controller interrupts
Back when the CRD support was brought up, the usb_2 controller didn't
have anything connected to it in order to test it properly, so it was
never enabled.
On the Lenovo ThinkPad T14s, the usb_2 controller has the fingerprint
controller connected to it. So enabling it, proved that the interrupts
lines were wrong from the start.
Fix both the pwr_event and the DWC ctrl_irq lines, according to
documentation.
Fixes: 4af46b7bd66f ("arm64: dts: qcom: x1e80100: Add USB nodes")
Cc: stable@vger.kernel.org # 6.9
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250107-x1e80100-fix-usb2-controller-irqs-v1-1-4689aa9852a7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Diffstat (limited to '')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/x1e80100.dtsi | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi index 861e1706245e..236fc295e978 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi @@ -4782,7 +4782,7 @@ <&gcc GCC_USB20_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; - interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, <&pdc 50 IRQ_TYPE_EDGE_BOTH>, <&pdc 49 IRQ_TYPE_EDGE_BOTH>; interrupt-names = "pwr_event", @@ -4808,7 +4808,7 @@ usb_2_dwc3: usb@a200000 { compatible = "snps,dwc3"; reg = <0 0x0a200000 0 0xcd00>; - interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; iommus = <&apps_smmu 0x14e0 0x0>; phys = <&usb_2_hsphy>; phy-names = "usb2-phy"; |