diff options
| author |   Martin Blumenstingl <martin.blumenstingl@googlemail.com> | 2025-03-29 20:01:32 +0100 |
|---|---|---|
| committer |   Linus Walleij <linus.walleij@linaro.org> | 2025-04-15 09:47:37 +0200 |
| commit | e56088a13708757da68ad035269d69b93ac8c389 (patch) | |
| tree | 9ef0fd1dc0b90816a98415652a13461ffd9f5169 | |
| parent | pinctrl: imx: Return NULL if no group is matched and found (diff) | |
| download | wireguard-linux-e56088a13708757da68ad035269d69b93ac8c389.tar.xz wireguard-linux-e56088a13708757da68ad035269d69b93ac8c389.zip | |
pinctrl: meson: define the pull up/down resistor value as 60 kOhm
The public datasheets of the following Amlogic SoCs describe a typical
resistor value for the built-in pull up/down resistor:
- Meson8/8b/8m2: not documented
- GXBB (S905): 60 kOhm
- GXL (S905X): 60 kOhm
- GXM (S912): 60 kOhm
- G12B (S922X): 60 kOhm
- SM1 (S905D3): 60 kOhm
The public G12B and SM1 datasheets additionally state min and max
values:
- min value: 50 kOhm for both, pull-up and pull-down
- max value for the pull-up: 70 kOhm
- max value for the pull-down: 130 kOhm
Use 60 kOhm in the pinctrl-meson driver as well so it's shown in the
debugfs output. It may not be accurate for Meson8/8b/8m2 but in reality
60 kOhm is closer to the actual value than 1 Ohm.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/20250329190132.855196-1-martin.blumenstingl@googlemail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to '')
| -rw-r--r-- | drivers/pinctrl/meson/pinctrl-meson.c | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/drivers/pinctrl/meson/pinctrl-meson.c b/drivers/pinctrl/meson/pinctrl-meson.c index 253a0cc57e39..e5a32a0532ee 100644 --- a/drivers/pinctrl/meson/pinctrl-meson.c +++ b/drivers/pinctrl/meson/pinctrl-meson.c @@ -487,7 +487,7 @@ static int meson_pinconf_get(struct pinctrl_dev *pcdev, unsigned int pin, case PIN_CONFIG_BIAS_PULL_DOWN: case PIN_CONFIG_BIAS_PULL_UP: if (meson_pinconf_get_pull(pc, pin) == param) - arg = 1; + arg = 60000; else return -EINVAL; break; |