Merge tag 'ux500-dts-v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/dt

This are some DTS changes for the Ux500 for the v5.4 kernel cycle:

- Update the CoreSight blocks to use the latest and greatest
  bindings

- Push the thermal driver config down to the main SoC DTSI
  as it applies to all ASICs.

- Set a pull-up on the ST UIB right.

* tag 'ux500-dts-v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: dts: ux500: set pull-up on STUIB STMPE IRQ line
  ARM: dts: ux500: Fix up the thermal nodes
  ARM: dts: ste: Update coresight DT bindings

Link: https://lore.kernel.org/r/CACRpkdbKX7a15SC-zwxmH_ygGzOKrn0h-pzzm22UpRcLRfRVNA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

3 files changed, 34 insertions, 32 deletions

diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index b1a31134f860..90dcbc3a29c3 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -92,7 +92,7 @@
 		};
 
 		funnel@801a6000 {
-			compatible = "arm,coresight-funnel", "arm,primecell";
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 			reg = <0x801a6000 0x1000>;
 
 			clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
@@ -127,7 +127,7 @@
 		};
 
 		replicator {
-			compatible = "arm,coresight-replicator";
+			compatible = "arm,coresight-static-replicator";
 			clocks = <&prcmu_clk PRCMU_APEATCLK>;
 			clock-names = "atclk";
 
@@ -505,10 +505,30 @@
 			thermal@801573c0 {
 				compatible = "stericsson,db8500-thermal";
 				reg = <0x801573c0 0x40>;
+				interrupt-parent = <&prcmu>;
 				interrupts = <21 IRQ_TYPE_LEVEL_HIGH>,
 					     <22 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH";
-				status = "disabled";
+				num-trips = <4>;
+
+				trip0-temp = <70000>;
+				trip0-type = "active";
+				trip0-cdev-num = <1>;
+				trip0-cdev-name0 = "thermal-cpufreq-0";
+
+				trip1-temp = <75000>;
+				trip1-type = "active";
+				trip1-cdev-num = <1>;
+				trip1-cdev-name0 = "thermal-cpufreq-0";
+
+				trip2-temp = <80000>;
+				trip2-type = "active";
+				trip2-cdev-num = <1>;
+				trip2-cdev-name0 = "thermal-cpufreq-0";
+
+				trip3-temp = <85000>;
+				trip3-type = "critical";
+				trip3-cdev-num = <0>;
 			};
 
 			db8500-prcmu-regulators {
diff --git a/arch/arm/boot/dts/ste-href-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi
index b17998f4f7ca..e32d0c36feb8 100644
--- a/arch/arm/boot/dts/ste-href-stuib.dtsi
+++ b/arch/arm/boot/dts/ste-href-stuib.dtsi
@@ -38,6 +38,8 @@
 				interrupt-controller;
 				vcc-supply = <&db8500_vsmps2_reg>;
 				vio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&stmpe_stuib_mode>;
 
 				wakeup-source;
 				st,autosleep-timeout = <1024>;
@@ -126,6 +128,15 @@
 		};
 
 		pinctrl {
+			/* Pull up this GPIO pin */
+			stmpe {
+				stmpe_stuib_mode: stmpe_stuib {
+					stuib_cfg {
+						ste,pins = "GPIO218_AH11";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
 			prox {
 				prox_stuib_mode: prox_stuib {
 					stuib_cfg {
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 3428290644ba..064e8abec954 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -376,40 +376,11 @@
 			pinctrl-0 = <&ssp0_snowball_mode>;
 		};
 
-		cpufreq-cooling {
-			status = "okay";
-		};
-
 		prcmu@80157000 {
 			cpufreq {
 				status = "okay";
 			};
 
-			thermal@801573c0 {
-				num-trips = <4>;
-
-				trip0-temp = <70000>;
-				trip0-type = "active";
-				trip0-cdev-num = <1>;
-				trip0-cdev-name0 = "thermal-cpufreq-0";
-
-				trip1-temp = <75000>;
-				trip1-type = "active";
-				trip1-cdev-num = <1>;
-				trip1-cdev-name0 = "thermal-cpufreq-0";
-
-				trip2-temp = <80000>;
-				trip2-type = "active";
-				trip2-cdev-num = <1>;
-				trip2-cdev-name0 = "thermal-cpufreq-0";
-
-				trip3-temp = <85000>;
-				trip3-type = "critical";
-				trip3-cdev-num = <0>;
-
-				status = "okay";
-			};
-
 			ab8500 {
 				ab8500-gpio {
 					/*