diff options
| author |   Rob Herring <robh@kernel.org> | 2018-07-23 15:59:44 -0600 |
|---|---|---|
| committer | Rob Herring <robh@kernel.org> | 2018-07-25 14:09:39 -0600 |
| commit | 791d3ef2e11100449837dc0b6fe884e60ca3a484 (patch) | |
| tree | 7797383556224291dd8e8b33f47808d50bb23653 /Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt | |
| parent | pinctrl: tegra: fix spelling in devicetree binding document (diff) | |
| download | wireguard-linux-791d3ef2e11100449837dc0b6fe884e60ca3a484.tar.xz wireguard-linux-791d3ef2e11100449837dc0b6fe884e60ca3a484.zip | |
dt-bindings: remove 'interrupt-parent' from bindings
'interrupt-parent' is often documented as part of define bindings, but
it is really outside the scope of a device binding. It's never required
in a given node as it is often inherited from a parent node. Or it can
be implicit if a parent node is an 'interrupt-controller' node. So
remove it from all the binding files.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Diffstat (limited to 'Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt | 2 |
1 files changed, 0 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt b/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt index aacc8b92968c..09e0a21f705e 100644 --- a/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt +++ b/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt @@ -19,8 +19,6 @@ hardware are EDID, HPD, and interrupts. stdp4028-ge-b850v3-fw required properties: - compatible : "megachips,stdp4028-ge-b850v3-fw" - reg : I2C bus address - - interrupt-parent : phandle of the interrupt controller that services - interrupts to the device - interrupts : one interrupt should be described here, as in <0 IRQ_TYPE_LEVEL_HIGH> - ports : One input port(reg = <0>) and one output port(reg = <1>) |