dt-bindings:iio:accel:bosch,bma180: txt to yaml format conversion.

One question in here is whether we want to constrain the number of
interrupts.  Some parts definitely only have 1 such pin, and others
2 pins but I can not find information on the bma254.

Oleksandr's email address is bouncing so I've listed myself as
maintainer for this binding until someone else steps up.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201031184854.745828-41-jic23@kernel.org

1 files changed, 0 insertions, 35 deletions

diff --git a/Documentation/devicetree/bindings/iio/accel/bma180.txt b/Documentation/devicetree/bindings/iio/accel/bma180.txt
deleted file mode 100644
index 33da4a6fdb39..000000000000
--- a/Documentation/devicetree/bindings/iio/accel/bma180.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-* Bosch BMA023 / BMA150/ BMA180 / BMA25x / SMB380 triaxial acceleration sensor
-
-https://media.digikey.com/pdf/Data%20Sheets/Bosch/BMA150.pdf
-http://omapworld.com/BMA180_111_1002839.pdf
-http://ae-bst.resource.bosch.com/media/products/dokumente/bma250/bst-bma250-ds002-05.pdf
-
-Required properties:
-
-  - compatible : should be one of:
-    "bosch,bma023"
-    "bosch,bma150"
-    "bosch,bma180"
-    "bosch,bma250"
-    "bosch,bma254"
-    "bosch,smb380"
-  - reg : the I2C address of the sensor
-  - vdd-supply : regulator phandle connected to the VDD pin
-  - vddio-supply : regulator phandle connected to the VDDIO pin
-
-Optional properties:
-
-  - interrupts : interrupt mapping for GPIO IRQ, it should by configured with
-		flags IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING
-		For the bma250 the first interrupt listed must be the one
-		connected to the INT1 pin, the second (optional) interrupt
-		listed must be the one connected to the INT2 pin.
-
-Example:
-
-bma180@40 {
-	compatible = "bosch,bma180";
-	reg = <0x40>;
-	interrupt-parent = <&gpio6>;
-	interrupts = <18 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
-};