dt-bindings: interrupt-controller: migrate MIPS CPU interrupt controller text bindings to YAML

MIPS CPU interrupt controller bindings used text format, so migrate them
to YAML.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220921072405.610739-1-sergio.paracuellos@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 47 deletions

diff --git a/Documentation/devicetree/bindings/mips/cpu_irq.txt b/Documentation/devicetree/bindings/mips/cpu_irq.txt
deleted file mode 100644
index f080f06da6d8..000000000000
--- a/Documentation/devicetree/bindings/mips/cpu_irq.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-MIPS CPU interrupt controller
-
-On MIPS the mips_cpu_irq_of_init() helper can be used to initialize the 8 CPU
-IRQs from a devicetree file and create a irq_domain for IRQ controller.
-
-With the irq_domain in place we can describe how the 8 IRQs are wired to the
-platforms internal interrupt controller cascade.
-
-Below is an example of a platform describing the cascade inside the devicetree
-and the code used to load it inside arch_init_irq().
-
-Required properties:
-- compatible : Should be "mti,cpu-interrupt-controller"
-
-Example devicetree:
-	cpu-irq: cpu-irq {
-		#address-cells = <0>;
-
-		interrupt-controller;
-		#interrupt-cells = <1>;
-
-		compatible = "mti,cpu-interrupt-controller";
-	};
-
-	intc: intc@200 {
-		compatible = "ralink,rt2880-intc";
-		reg = <0x200 0x100>;
-
-		interrupt-controller;
-		#interrupt-cells = <1>;
-
-		interrupt-parent = <&cpu-irq>;
-		interrupts = <2>;
-	};
-
-
-Example platform irq.c:
-static struct of_device_id __initdata of_irq_ids[] = {
-	{ .compatible = "mti,cpu-interrupt-controller", .data = mips_cpu_irq_of_init },
-	{ .compatible = "ralink,rt2880-intc", .data = intc_of_init },
-	{},
-};
-
-void __init arch_init_irq(void)
-{
-	of_irq_init(of_irq_ids);
-}