PCI: rcar: Add R-Car gen3 PHY support

On R-Car gen3 SoCs the PCIe PHY has its own register region, thus we
need to add the corresponding code in rcar_pcie_hw_init_gen3() and call
devm_phy_optional_get() at the driver's probing time, so that the
existing R-Car gen3 device trees (not having a PHY node) would still
work (we only need to power up the PHY on R-Car V3H).

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Rob Herring <robh@kernel.org>

1 files changed, 5 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt
index 1fb614e615da..4376c69ea20a 100644
--- a/Documentation/devicetree/bindings/pci/rcar-pci.txt
+++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt
@@ -32,6 +32,11 @@ compatible: "renesas,pcie-r8a7743" for the R8A7743 SoC;
 	and PCIe bus clocks.
 - clock-names: from common clock binding: should be "pcie" and "pcie_bus".
 
+Optional properties:
+- phys: from common PHY binding: PHY phandle and specifier (only make sense
+	for R-Car gen3 SoCs where the PCIe PHYs have their own register blocks).
+- phy-names: from common PHY binding: should be "pcie".
+
 Example:
 
 SoC-specific DT Entry: