Merge tag 'char-misc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big set of char, misc, and other assorted driver subsystem
  patches for 5.10-rc1.

  There's a lot of different things in here, all over the drivers/
  directory. Some summaries:

   - soundwire driver updates

   - habanalabs driver updates

   - extcon driver updates

   - nitro_enclaves new driver

   - fsl-mc driver and core updates

   - mhi core and bus updates

   - nvmem driver updates

   - eeprom driver updates

   - binder driver updates and fixes

   - vbox minor bugfixes

   - fsi driver updates

   - w1 driver updates

   - coresight driver updates

   - interconnect driver updates

   - misc driver updates

   - other minor driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (396 commits)
  binder: fix UAF when releasing todo list
  docs: w1: w1_therm: Fix broken xref, mistakes, clarify text
  misc: Kconfig: fix a HISI_HIKEY_USB dependency
  LSM: Fix type of id parameter in kernel_post_load_data prototype
  misc: Kconfig: add a new dependency for HISI_HIKEY_USB
  firmware_loader: fix a kernel-doc markup
  w1: w1_therm: make w1_poll_completion static
  binder: simplify the return expression of binder_mmap
  test_firmware: Test partial read support
  firmware: Add request_partial_firmware_into_buf()
  firmware: Store opt_flags in fw_priv
  fs/kernel_file_read: Add "offset" arg for partial reads
  IMA: Add support for file reads without contents
  LSM: Add "contents" flag to kernel_read_file hook
  module: Call security_kernel_post_load_data()
  firmware_loader: Use security_post_load_data()
  LSM: Introduce kernel_post_load_data() hook
  fs/kernel_read_file: Add file_size output argument
  fs/kernel_read_file: Switch buffer size arg to size_t
  fs/kernel_read_file: Remove redundant size argument
  ...

9 files changed, 157 insertions, 116 deletions

diff --git a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.txt b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.txt
deleted file mode 100644
index 936fbdf12815..000000000000
--- a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* PTN5150 CC (Configuration Channel) Logic device
-
-PTN5150 is a small thin low power CC logic chip supporting the USB Type-C
-connector application with CC control logic detection and indication functions.
-It is interfaced to the host controller using an I2C interface.
-
-Required properties:
-- compatible: should be "nxp,ptn5150"
-- reg: specifies the I2C slave address of the device
-- int-gpio: should contain a phandle and GPIO specifier for the GPIO pin
-	connected to the PTN5150's INTB pin.
-- vbus-gpio: should contain a phandle and GPIO specifier for the GPIO pin which
-	is used to control VBUS.
-- pinctrl-names : a pinctrl state named "default" must be defined.
-- pinctrl-0 : phandle referencing pin configuration of interrupt and vbus
-	control.
-
-Example:
-	ptn5150@1d {
-		compatible = "nxp,ptn5150";
-		reg = <0x1d>;
-		int-gpio = <&msmgpio 78 GPIO_ACTIVE_HIGH>;
-		vbus-gpio = <&msmgpio 148 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&ptn5150_default>;
-		status = "okay";
-	};
diff --git a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
new file mode 100644
index 000000000000..4b0f414486d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/extcon-ptn5150.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PTN5150 CC (Configuration Channel) Logic device
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  PTN5150 is a small thin low power CC logic chip supporting the USB Type-C
+  connector application with CC control logic detection and indication
+  functions.  It is interfaced to the host controller using an I2C interface.
+
+properties:
+  compatible:
+    const: nxp,ptn5150
+
+  int-gpios:
+    deprecated: true
+    description:
+      GPIO pin (input) connected to the PTN5150's INTB pin.
+      Use "interrupts" instead.
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  vbus-gpios:
+    description:
+      GPIO pin (output) used to control VBUS. If skipped, no such control
+      takes place.
+
+required:
+  - compatible
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ptn5150@1d {
+            compatible = "nxp,ptn5150";
+            reg = <0x1d>;
+            interrupt-parent = <&msmgpio>;
+            interrupts = <78 IRQ_TYPE_LEVEL_HIGH>;
+            vbus-gpios = <&msmgpio 148 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt b/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt
index b758f91914f7..9853fefff5d8 100644
--- a/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt
+++ b/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt
@@ -12,6 +12,13 @@ Required properties:
  - pinctrl-0: phandle to pinctrl node
  - pinctrl-names: pinctrl state
 
+Optional properties:
+ - cfam-reset-gpios: GPIO for CFAM reset
+
+ - fsi-routing-gpios: GPIO for setting the FSI mux (internal or cabled)
+ - fsi-mux-gpios: GPIO for detecting the desired FSI mux state
+
+
 Examples:
 
     fsi-master {
@@ -21,4 +28,9 @@ Examples:
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fsi1_default>;
 	clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+
+	fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
+	fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
+
+	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
     };
diff --git a/Documentation/devicetree/bindings/interconnect/interconnect.txt b/Documentation/devicetree/bindings/interconnect/interconnect.txt
index 6f5d23a605b7..138c544c8c8c 100644
--- a/Documentation/devicetree/bindings/interconnect/interconnect.txt
+++ b/Documentation/devicetree/bindings/interconnect/interconnect.txt
@@ -19,7 +19,8 @@ directly.
 Required properties:
 - compatible : contains the interconnect provider compatible string
 - #interconnect-cells : number of cells in a interconnect specifier needed to
-			encode the interconnect node id
+			encode the interconnect node id and optionally add a
+			path tag
 
 Example:
 
@@ -44,6 +45,10 @@ components it has to interact with.
 Required properties:
 interconnects : Pairs of phandles and interconnect provider specifier to denote
 	        the edge source and destination ports of the interconnect path.
+		An optional path tag value could specified as additional argument
+		to both endpoints and in such cases, this information will be passed
+		to the interconnect framework to do aggregation based on the attached
+		tag.
 
 Optional properties:
 interconnect-names : List of interconnect path name strings sorted in the same
@@ -62,3 +67,20 @@ Example:
 		interconnects = <&pnoc MASTER_SDCC_1 &bimc SLAVE_EBI_CH0>;
 		interconnect-names = "sdhc-mem";
 	};
+
+Example with path tags:
+
+	gnoc: interconnect@17900000 {
+		...
+		interconnect-cells = <2>;
+	};
+
+	mnoc: interconnect@1380000 {
+		...
+		interconnect-cells = <2>;
+	};
+
+	cpu@0 {
+		...
+		interconnects = <&gnoc MASTER_APPSS_PROC 3 &mnoc SLAVE_EBI1 3>;
+	}
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml b/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml
index 5971fc1df08d..e23df4836c6f 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml
@@ -21,6 +21,23 @@ properties:
     enum:
       - qcom,bcm-voter
 
+  qcom,tcs-wait:
+    description: |
+      Optional mask of which TCSs (Triggered Command Sets) wait for completion
+      upon triggering. If not specified, then the AMC and WAKE sets wait for
+      completion. The mask bits are available in the QCOM_ICC_TAG_* defines.
+
+      The AMC TCS is triggered immediately when icc_set_bw() is called. The
+      WAKE/SLEEP TCSs are triggered when the RSC transitions between active and
+      sleep modes.
+
+      In most cases, it's necessary to wait in both the AMC and WAKE sets to
+      ensure resources are available before use. If a specific RSC and its use
+      cases can ensure sufficient delay by other means, then this can be
+      overridden to reduce latencies.
+
+    $ref: /schemas/types.yaml#/definitions/uint32
+
 required:
   - compatible
 
@@ -39,7 +56,10 @@ examples:
   # as defined in Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt
   - |
 
+    #include <dt-bindings/interconnect/qcom,icc.h>
+
     disp_bcm_voter: bcm_voter {
         compatible = "qcom,bcm-voter";
+        qcom,tcs-wait = <QCOM_ICC_TAG_AMC>;
     };
 ...
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
index 91f70c9067d1..d6a95c3cb26f 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
@@ -19,6 +19,8 @@ properties:
     enum:
       - qcom,sc7180-osm-l3
       - qcom,sdm845-osm-l3
+      - qcom,sm8150-osm-l3
+      - qcom,sm8250-epss-l3
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
index dab17c0716ce..30c2a092d2d3 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
@@ -1,16 +1,17 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/interconnect/qcom,sdm845.yaml#
+$id: http://devicetree.org/schemas/interconnect/qcom,rpmh.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm SDM845 Network-On-Chip Interconnect
+title: Qualcomm RPMh Network-On-Chip Interconnect
 
 maintainers:
   - Georgi Djakov <georgi.djakov@linaro.org>
+  - Odelu Kukatla <okukatla@codeaurora.org>
 
 description: |
-   SDM845 interconnect providers support system bandwidth requirements through
+   RPMh interconnect providers support system bandwidth requirements through
    RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
    able to communicate with the BCM through the Resource State Coordinator (RSC)
    associated with each execution environment. Provider nodes must point to at
@@ -23,6 +24,19 @@ properties:
 
   compatible:
     enum:
+      - qcom,sc7180-aggre1-noc
+      - qcom,sc7180-aggre2-noc
+      - qcom,sc7180-camnoc-virt
+      - qcom,sc7180-compute-noc
+      - qcom,sc7180-config-noc
+      - qcom,sc7180-dc-noc
+      - qcom,sc7180-gem-noc
+      - qcom,sc7180-ipa-virt
+      - qcom,sc7180-mc-virt
+      - qcom,sc7180-mmss-noc
+      - qcom,sc7180-npu-noc
+      - qcom,sc7180-qup-virt
+      - qcom,sc7180-system-noc
       - qcom,sdm845-aggre1-noc
       - qcom,sdm845-aggre2-noc
       - qcom,sdm845-config-noc
@@ -31,6 +45,28 @@ properties:
       - qcom,sdm845-mem-noc
       - qcom,sdm845-mmss-noc
       - qcom,sdm845-system-noc
+      - qcom,sm8150-aggre1-noc
+      - qcom,sm8150-aggre2-noc
+      - qcom,sm8150-camnoc-noc
+      - qcom,sm8150-compute-noc
+      - qcom,sm8150-config-noc
+      - qcom,sm8150-dc-noc
+      - qcom,sm8150-gem-noc
+      - qcom,sm8150-ipa-virt
+      - qcom,sm8150-mc-virt
+      - qcom,sm8150-mmss-noc
+      - qcom,sm8150-system-noc
+      - qcom,sm8250-aggre1-noc
+      - qcom,sm8250-aggre2-noc
+      - qcom,sm8250-compute-noc
+      - qcom,sm8250-config-noc
+      - qcom,sm8250-dc-noc
+      - qcom,sm8250-gem-noc
+      - qcom,sm8250-ipa-virt
+      - qcom,sm8250-mc-virt
+      - qcom,sm8250-mmss-noc
+      - qcom,sm8250-npu-noc
+      - qcom,sm8250-system-noc
 
   '#interconnect-cells':
     const: 1
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml
deleted file mode 100644
index 8659048f92a7..000000000000
--- a/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml
+++ /dev/null
@@ -1,85 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/interconnect/qcom,sc7180.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm SC7180 Network-On-Chip Interconnect
-
-maintainers:
-  - Odelu Kukatla <okukatla@codeaurora.org>
-
-description: |
-   SC7180 interconnect providers support system bandwidth requirements through
-   RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
-   able to communicate with the BCM through the Resource State Coordinator (RSC)
-   associated with each execution environment. Provider nodes must point to at
-   least one RPMh device child node pertaining to their RSC and each provider
-   can map to multiple RPMh resources.
-
-properties:
-  reg:
-    maxItems: 1
-
-  compatible:
-    enum:
-      - qcom,sc7180-aggre1-noc
-      - qcom,sc7180-aggre2-noc
-      - qcom,sc7180-camnoc-virt
-      - qcom,sc7180-compute-noc
-      - qcom,sc7180-config-noc
-      - qcom,sc7180-dc-noc
-      - qcom,sc7180-gem-noc
-      - qcom,sc7180-ipa-virt
-      - qcom,sc7180-mc-virt
-      - qcom,sc7180-mmss-noc
-      - qcom,sc7180-npu-noc
-      - qcom,sc7180-qup-virt
-      - qcom,sc7180-system-noc
-
-  '#interconnect-cells':
-    const: 1
-
-  qcom,bcm-voters:
-    $ref: /schemas/types.yaml#/definitions/phandle-array
-    description: |
-      List of phandles to qcom,bcm-voter nodes that are required by
-      this interconnect to send RPMh commands.
-
-  qcom,bcm-voter-names:
-    $ref: /schemas/types.yaml#/definitions/string-array
-    description: |
-      Names for each of the qcom,bcm-voters specified.
-
-required:
-  - compatible
-  - reg
-  - '#interconnect-cells'
-  - qcom,bcm-voters
-
-additionalProperties: false
-
-examples:
-  - |
-      #include <dt-bindings/interconnect/qcom,sc7180.h>
-
-      config_noc: interconnect@1500000 {
-            compatible = "qcom,sc7180-config-noc";
-            reg = <0x01500000 0x28000>;
-            #interconnect-cells = <1>;
-            qcom,bcm-voters = <&apps_bcm_voter>;
-      };
-
-      system_noc: interconnect@1620000 {
-            compatible = "qcom,sc7180-system-noc";
-            reg = <0x01620000 0x17080>;
-            #interconnect-cells = <1>;
-            qcom,bcm-voters = <&apps_bcm_voter>;
-      };
-
-      mmss_noc: interconnect@1740000 {
-            compatible = "qcom,sc7180-mmss-noc";
-            reg = <0x01740000 0x1c100>;
-            #interconnect-cells = <1>;
-            qcom,bcm-voters = <&apps_bcm_voter>;
-      };
diff --git a/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt b/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt
index 436547f3b155..b104be131235 100644
--- a/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt
+++ b/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt
@@ -11,6 +11,7 @@ board specific bus parameters.
 		    Example:
 			"qcom,soundwire-v1.3.0"
 			"qcom,soundwire-v1.5.0"
+			"qcom,soundwire-v1.5.1"
 			"qcom,soundwire-v1.6.0"
 - reg:
 	Usage: required